FCC ID W56MTSMCH54000

FCC ID	W56MTSMCH54000
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	W56
Product Code	MTSMCH54000
Applicant Business	ZOLL Manufacturing Corporation 🇺🇸
Related Domains	zoll.com
Equipment Class	HE910-D
Test Firm	A Test Lab Techno Corp.

Frequency Range	Application Purpose	Final Action Date
824.2-848.2 MHz	Class II permissive change or modification of presently authorized equipment	2014-05-21
824.2-848.2 MHz	Change in identification of presently authorized equipment. Original FCC ID: RI7HE910 Grant Date: 03/13/2012	2014-05-15

Document	Type	Available	File
Internal Photos	Internal Photos	2014-05-21	PDF 468.3 KB
External Photos	External Photos	2014-05-21	PDF 361.7 KB
External Photos	External Photos	2014-05-15	PDF 1.8 MB
ID Label	ID Label/Location Info	2014-05-21	PDF 210.4 KB
ID Label	ID Label/Location Info	2014-05-15	PDF 579.6 KB
Compliance Opinion	Cover Letter(s)	2014-05-21	PDF 20.4 KB
Cover letter	Cover Letter(s)	2014-05-21	PDF 127.3 KB
Compliance Opinion	Cover Letter(s)	2014-05-15	PDF 20.4 KB
Cover letter	Cover Letter(s)	2014-05-15	PDF 231.5 KB
RF Exposure	RF Exposure Info	2014-05-21	PDF 21.5 KB

Application ID	eSbxxxQrAuefEkyKOFs/mw==
Final Action Date	2014-05-21
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0018524090
Model	MTSMCH54000
Equipment Class	JBP - Part 15 Class B Computing Device Peripheral
Device Description	HE910-D
Responsible Party	Gene Partin, Director, QA & Regulatory Affairs, gpartin@zoll.com , 412-968-3333
Test Firm	Fly LU, A Test Lab Techno Corp., fly@atl-lab.com.tw , 886-3-2710188
TCB Email	dghizzone@nwemc.com
TCB Scope	A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term Confidentiality	No
Long-Term Confidentiality	No
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 5.22 dBi for part 22H, 3.31 dBi for part 24E and 6.45 dBi for part 27. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations

Application ID	Date	Purpose
eSbxxxQrAuefEkyKOFs/mw==	2014-05-21	Class II permissive change or modification of presently authorized equipment
O82sX1Ah6RB5+L5W2fK5HQ==	2014-05-21	Class II permissive change or modification of presently authorized equipment
ZYZLiDmIBu1WuWOeJpBumQ==	2014-05-15	Change in identification of presently authorized equipment. Original FCC ID: RI7HE910 Grant Date: 03/13/2012
A2zJGvVJGCci+DorzWoNqg==	2014-05-15	Change in identification of presently authorized equipment. Original FCC ID: RI7HE910 Grant Date: 03/13/2012

Frequency	Output	Tolerance	Emission	Rules
824.2-848.2 MHz	1.995	1ppm	300KGXW	22H
824.2-848.8 MHz	0.997	1ppm	300KG7W	22H
826.4-846.4 MHz	0.446	1ppm	4M20F9W	22H
1712.4-1752.6 MHz	0.226	1ppm	4M20F9W	27
1850.2-1909.8 MHz	0.993	1ppm	300KGXW	24E
1850.2-1909.8 MHz	0.38	1ppm	300KG7W	24E
1852.4-1907.6 MHz	0.243	1ppm	4M20F9W	24E

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen
6775 NE Evergreen Parkway, Suite 400
Hillsboro, OR 97124

Date of Grant: 05/15/2014

Application Dated: 05/15/2014

ZOLL Manufacturing Corporation

121 Gamma Drive

Pittsburgh, PA 15238

Attention: Gene Partin , Director, QA & Regulatory Affairs

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	W56MTSMCH54000

Name of Grantee:	ZOLL Manufacturing Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	HE910-D
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15B	-

Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 5.22 dBi for part 22H, 3.31 dBi for part 24E and 6.45 dBi for part 27. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

ZOLL Manufacturing Corporation
121 Gamma Drive
Pittsburgh, PA 15238
United States

Date of Grant: 05/15/2014

Application Dated: 05/15/2014

Attention: Gene Partin , Director, QA & Regulatory Affairs

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	W56MTSMCH54000

Name of Grantee:	ZOLL Manufacturing Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	HE910-D
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15B	-

Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 5.22 dBi for part 22H, 3.31 dBi for part 24E and 6.45 dBi for part 27. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations

TCB Grant - Application O82sX1Ah6RB5+L5W2fK5HQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen
6775 NE Evergreen Parkway, Suite 400
Hillsboro, OR 97124

Date of Grant: 05/21/2014

Application Dated: 05/21/2014

ZOLL Manufacturing Corporation

121 Gamma Drive

Pittsburgh, PA 15238

Attention: Gene Partin , Director, QA & Regulatory Affairs

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	W56MTSMCH54000

Name of Grantee:	ZOLL Manufacturing Corporation

Equipment Class:	PCS Licensed Transmitter
Notes:	HE910-D
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	824.2 - 848.2	1.995	1.0 PM	300KGXW
	22H	824.2 - 848.8	0.997	1.0 PM	300KG7W
	22H	826.4 - 846.4	0.446	1.0 PM	4M20F9W
	27	1712.4 - 1752.6	0.226	1.0 PM	4M20F9W
	24E	1850.2 - 1909.8	0.993	1.0 PM	300KGXW
	24E	1852.4 - 1907.6	0.243	1.0 PM	4M20F9W
	24E	1850.2 - 1909.8	0.38	1.0 PM	300KG7W

Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 5.22 dBi for part 22H, 3.31 dBi for part 24E and 6.45 dBi for part 27. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

ZOLL Manufacturing Corporation
121 Gamma Drive
Pittsburgh, PA 15238
United States

Date of Grant: 05/21/2014

Application Dated: 05/21/2014

Attention: Gene Partin , Director, QA & Regulatory Affairs

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	W56MTSMCH54000

Name of Grantee:	ZOLL Manufacturing Corporation

Equipment Class:	PCS Licensed Transmitter
Notes:	HE910-D
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	824.2 - 848.2	1.995	1.0 PM	300KGXW
	22H	824.2 - 848.8	0.997	1.0 PM	300KG7W
	22H	826.4 - 846.4	0.446	1.0 PM	4M20F9W
	27	1712.4 - 1752.6	0.226	1.0 PM	4M20F9W
	24E	1850.2 - 1909.8	0.993	1.0 PM	300KGXW
	24E	1852.4 - 1907.6	0.243	1.0 PM	4M20F9W
	24E	1850.2 - 1909.8	0.38	1.0 PM	300KG7W

Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 5.22 dBi for part 22H, 3.31 dBi for part 24E and 6.45 dBi for part 27. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations

TCB Grant - Application eSbxxxQrAuefEkyKOFs/mw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen
6775 NE Evergreen Parkway, Suite 400
Hillsboro, OR 97124

Date of Grant: 05/21/2014

Application Dated: 05/21/2014

ZOLL Manufacturing Corporation

121 Gamma Drive

Pittsburgh, PA 15238

Attention: Gene Partin , Director, QA & Regulatory Affairs

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	W56MTSMCH54000

Name of Grantee:	ZOLL Manufacturing Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	HE910-D
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15B	-

Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 5.22 dBi for part 22H, 3.31 dBi for part 24E and 6.45 dBi for part 27. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

ZOLL Manufacturing Corporation
121 Gamma Drive
Pittsburgh, PA 15238
United States

Date of Grant: 05/21/2014

Application Dated: 05/21/2014

Attention: Gene Partin , Director, QA & Regulatory Affairs

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	W56MTSMCH54000

Name of Grantee:	ZOLL Manufacturing Corporation

Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	HE910-D
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15B	-

Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 5.22 dBi for part 22H, 3.31 dBi for part 24E and 6.45 dBi for part 27. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations

TCB Grant - Application A2zJGvVJGCci+DorzWoNqg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Portland - Evergreen
6775 NE Evergreen Parkway, Suite 400
Hillsboro, OR 97124

Date of Grant: 05/15/2014

Application Dated: 05/15/2014

ZOLL Manufacturing Corporation

121 Gamma Drive

Pittsburgh, PA 15238

Attention: Gene Partin , Director, QA & Regulatory Affairs

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	W56MTSMCH54000

Name of Grantee:	ZOLL Manufacturing Corporation

Equipment Class:	PCS Licensed Transmitter
Notes:	HE910-D
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	824.2 - 848.2	1.995	1.0 PM	300KGXW
	22H	824.2 - 848.8	0.997	1.0 PM	300KG7W
	22H	826.4 - 846.4	0.446	1.0 PM	4M20F9W
	27	1712.4 - 1752.6	0.226	1.0 PM	4M20F9W
	24E	1850.2 - 1909.8	0.993	1.0 PM	300KGXW
	24E	1850.2 - 1909.8	0.38	1.0 PM	300KG7W
	24E	1852.4 - 1907.6	0.243	1.0 PM	4M20F9W

Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 5.22 dBi for part 22H, 3.31 dBi for part 24E and 6.45 dBi for part 27. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

ZOLL Manufacturing Corporation
121 Gamma Drive
Pittsburgh, PA 15238
United States

Date of Grant: 05/15/2014

Application Dated: 05/15/2014

Attention: Gene Partin , Director, QA & Regulatory Affairs

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	W56MTSMCH54000

Name of Grantee:	ZOLL Manufacturing Corporation

Equipment Class:	PCS Licensed Transmitter
Notes:	HE910-D
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	824.2 - 848.2	1.995	1.0 PM	300KGXW
	22H	824.2 - 848.8	0.997	1.0 PM	300KG7W
	22H	826.4 - 846.4	0.446	1.0 PM	4M20F9W
	27	1712.4 - 1752.6	0.226	1.0 PM	4M20F9W
	24E	1850.2 - 1909.8	0.993	1.0 PM	300KGXW
	24E	1850.2 - 1909.8	0.38	1.0 PM	300KG7W
	24E	1852.4 - 1907.6	0.243	1.0 PM	4M20F9W

Single Modular Approval. Power listed is conducted. The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 5.22 dBi for part 22H, 3.31 dBi for part 24E and 6.45 dBi for part 27. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter not described under this FCC id, except in accordance with FCC multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations

Mail To:

FCC ID W56MTSMCH54000

HE910-D

by ZOLL Manufacturing Corporation

Grantee Code: W56 Product Code: MTSMCH54000

Latest application date: 2014-05-21

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application ZYZLiDmIBu1WuWOeJpBumQ==

EAS Grant - Application ZYZLiDmIBu1WuWOeJpBumQ==

TCB Grant - Application O82sX1Ah6RB5+L5W2fK5HQ==

EAS Grant - Application O82sX1Ah6RB5+L5W2fK5HQ==

TCB Grant - Application eSbxxxQrAuefEkyKOFs/mw==

EAS Grant - Application eSbxxxQrAuefEkyKOFs/mw==

TCB Grant - Application A2zJGvVJGCci+DorzWoNqg==

EAS Grant - Application A2zJGvVJGCci+DorzWoNqg==