FCC ID W6UHM80I85CR

W6U-HM80I85CR, W6U HM80I85CR, W6UHM80I85CR, W6UHM8OI85CR, W6UHM80185CR, W6UHM80I8SCR

SOLiD, Inc. ALLIANCE_5W HM80I85CR

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: W6UHM80I85CR is W6U. The remaining characters of the FCC ID, HM80I85CR, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: ALLIANCE_5W

Application: ALLIANCE_5W
Equipment Class: B2I - Part 20 Industrial Booster (CMRS)
Alternate Sources: FCC.gov | FCC.report
Registered By: SOLiD, Inc. - W6U (South Korea)

App #	Purpose	Date	Unique ID
1	Original Equipment	2018-07-09	RzwDR7hhL20kN6PNb7RNsw==

Operating Frequencies

Colombia Homologation [?]: W6UHM80I85CR

Frequency Range	Power Output	Tolerance	Emission Designator	Rule Parts	Line Entry
862-869 MHz	5.2 Watts	Amp	G7W	90S	1
862-869 MHz	5.297 Watts	Amp	F9W	90S	5
869-894 MHz	5.248 Watts	Amp	G7W	22H	2
869-894 MHz	5.152 Watts	Amp	G7W	22H	3
869-894 MHz	5.662 Watts	Amp	F9W	22H	4
869-894 MHz	5.321 Watts	Amp	F9W	22H	6

Exhibits

Document	Type	Submitted Available
MRDU_800I_850C Test Report_Rev01_part3	Test Report Adobe Acrobat PDF (2217 kB)	2018-07-08 2018-07-09
MRDU_800I_850C Test Report_Rev01_part2	Test Report Adobe Acrobat PDF (4819 kB)	2018-07-08 2018-07-09
MRDU_800I_850C Test Report_Rev01_part1	Test Report Adobe Acrobat PDF (5256 kB)	2018-07-08 2018-07-09
W6UHMAWS13R_Confidentiality Request Letter.pdf	Cover Letter(s) Adobe Acrobat PDF (115 kB)	2018-07-08 2018-07-09
W6UHMAWS13R_Attestation letter for Warning Label Message_Part 20	Cover Letter(s) Adobe Acrobat PDF (65 kB)	2018-07-08 2018-07-09
W6UHMAWS13R_Agent Authorization Letter.pdf	Cover Letter(s) Adobe Acrobat PDF (87 kB)	2018-07-08 2018-07-09
MRDU_800I_850C_FCC ID label & Location_rev.1	ID Label/Location Info Adobe Acrobat PDF (565 kB)	2018-07-08 2018-07-09
MRDU_800I_850C_Block diagram_rev.1	Block Diagram Adobe Acrobat PDF (129 kB)	2018-07-08
MRDU_800I_850C_Part list	Parts List/Tune Up Info Adobe Acrobat PDF (222 kB)	2018-07-08
MRDU_800I_850C APPENDIX A_EUT and Test Setup Photo	Test Setup Photos Adobe Acrobat PDF (562 kB)	2018-07-08 2019-01-05
MRDU_800I_850C_Circuit Diagram	Schematics Adobe Acrobat PDF (1214 kB)	2018-07-08
MRDU_800I_850C_Users manual_20180705	Users Manual Adobe Acrobat PDF (1831 kB)	2018-07-08 2019-01-05
MRDU_800I_850C_Operational description(180705)	Operational Description Adobe Acrobat PDF (878 kB)	2018-07-08
MRDU_800I_850C Internal Photos	Internal Photos Adobe Acrobat PDF (4229 kB)	2018-07-08 2019-01-05
MRDU_800I_850C_Block diagram_rev.2	Block Diagram Adobe Acrobat PDF (155 kB)	2018-07-09
MRDU_800I_850C_Tune-up procedure (180627)	Parts List/Tune Up Info Adobe Acrobat PDF (425 kB)	2018-07-08
MRDU_800I_850C External Photos	External Photos Adobe Acrobat PDF (405 kB)	2018-07-08 2019-01-05

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	SOLiD, Inc.
FCC Registration Number (FRN):	0018550988
Alphanumeric FCC ID:	W6UHM80I85CR
Unique Application Identifier:	RzwDR7hhL20kN6PNb7RNsw==
Line one:	10,9th Floor, SOLiD Space, Pangyoyeok-ro 220,
Line two:	Bundang-gu,
City:	Seongnam-si, Gyeonggi-do
State:	N/A
Country:	South Korea
Zip Code:	463-400

TCB Information

TCB Application Email Address:	tcb@hctamerica.com
TCB Scope:	B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27

FCC ID

Grantee Code:	W6U
Product Code:	HM80I85CR

Person at the applicant's address to receive grant or for contact

Name:	Kangyeob Bae
Title:	Team Manager

Telephone Number:

+82-31-627-6290

Extension:

Fax Number:	+82-31-627-6209
Email:	kybae@solid.co.kr

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: Yes

If so, specify the short-term confidentiality release date (MM/DD/YYYY format): 01/05/2019
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: B2I - Part 20 Industrial Booster (CMRS)
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	ALLIANCE_5W

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Does not apply

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: HCT Co., Ltd.

First Name: Lee

Last Name: Yoon-Jung

Telephone Number:

82-31-645-6432

Extension:

Fax Number: 82-31-645-6401

E-mail: yjlee@hct.co.kr

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
In-Building DAS Booster. Output power is conducted Devices supporting CDMA, WCDMA and LTE 5MHz and 10MHz will be the intended use. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing, and excluding any other devices connected to the (uplink) transmit output terminal of the base station interface unit. This application covers only the system configuration with base interface unit connected to a base station RF port in the uplink transmit path; operations of this remote unit if any in a system with base interface unit connected to antenna or amplifier for uplink transmissions require separate equipment authorization. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Sec. 1.1307(b)(3), for satisfying RF exposure compliance. The 862-869MHz band operation should be complied under Sec. 90.219(d) at time of installation and licensing. RF exposure will be addressed at time of installation and the use of higher gain antennas may require larger separation distances.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: SunHee Kim

Title of authorized signature: Agent

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

HCT America LLC
1726 Ringwood Avenue
San Jose, CA 95131

Date of Grant: 07/09/2018

Application Dated: 07/08/2018

SOLiD, Inc.

10,9th Floor, SOLiD Space, Pangyoyeok-ro 220,

Bundang-gu,

Seongnam-si, Gyeonggi-do, 463-400
South Korea

Attention: Kangyeob Bae , Team Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	W6UHM80I85CR

Name of Grantee:	SOLiD, Inc.

Equipment Class:	Part 20 Industrial Booster (CMRS)
Notes:	ALLIANCE_5W

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90S	862.0 - 869.0	5.2	Amp	G7W
	22H	869.0 - 894.0	5.248	Amp	G7W
	22H	869.0 - 894.0	5.152	Amp	G7W
	22H	869.0 - 894.0	5.662	Amp	F9W
	90S	862.0 - 869.0	5.297	Amp	F9W
	22H	869.0 - 894.0	5.321	Amp	F9W

In-Building DAS Booster. Output power is conducted Devices supporting CDMA, WCDMA and LTE 5MHz and 10MHz will be the intended use. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing, and excluding any other devices connected to the (uplink) transmit output terminal of the base station interface unit. This application covers only the system configuration with base interface unit connected to a base station RF port in the uplink transmit path; operations of this remote unit if any in a system with base interface unit connected to antenna or amplifier for uplink transmissions require separate equipment authorization. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Sec. 1.1307(b)(3), for satisfying RF exposure compliance. The 862-869MHz band operation should be complied under Sec. 90.219(d) at time of installation and licensing. RF exposure will be addressed at time of installation and the use of higher gain antennas may require larger separation distances.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

SOLiD, Inc.
10,9th Floor, SOLiD Space, Pangyoyeok-ro 220, Bundang-gu,
Seongnam-si, Gyeonggi-do, 463-400
South Korea