FCC ID W6UL781921

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131

Date of Grant: 09/18/2018 Application Dated: 09/18/2018

SOLiD, Inc.

10,9th Floor, SOLiD Space, Pangyoyeok-ro 220,

Bundang-gu,

Seongnam-si, Gyeonggi-do, 463-400 South Korea

Attention: Yong Chul Kim , Team Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	W6UL781921
Name of Grantee:	SOLiD, Inc.
Equipment Class:	Part 90 Class B Industrial Booster (non-SMR)
Notes:	ALLIANCE_2W

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
PF	90	758.0  -  768.0	1.977	Amp	G7W

In-Building DAS Booster. Power output listed is conducted. Device supports LTE 5 and 10 MHz modulation. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing, and excluding any other devices connected to the (uplink) transmit output terminal of the base station interface unit. This application covers only the system configuration with base interface unit connected to a base station RF port in the uplink transmit path; operations of this remote unit if any in a system with base interface unit connected to antenna or amplifier for uplink transmissions require separate equipment authorization. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna colocation requirements of §1.1307(b)(3), for satisfying RF exposure compliance. Class B Booster is fix location installation only according to §90.219(d)(4) and it is limited to deployed only up to 5 Watt maximum ERP requirement of §90.219(d)(3). RF exposure will be addressed at time of installation and the use of higher gain antennas may require larger separation distances.

PF:	Transmitter approved for Public Safety Broadband

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

SOLiD, Inc. 10,9th Floor, SOLiD Space, Pangyoyeok-ro 220, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 South Korea

Date of Grant: 09/18/2018 Application Dated: 09/18/2018

Attention: Yong Chul Kim , Team Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	W6UL781921
Name of Grantee:	SOLiD, Inc.
Equipment Class:	Part 90 Class B Industrial Booster (non-SMR)
Notes:	ALLIANCE_2W
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
PF	90	758.0  -  768.0	1.977	Amp	G7W

In-Building DAS Booster. Power output listed is conducted. Device supports LTE 5 and 10 MHz modulation. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing, and excluding any other devices connected to the (uplink) transmit output terminal of the base station interface unit. This application covers only the system configuration with base interface unit connected to a base station RF port in the uplink transmit path; operations of this remote unit if any in a system with base interface unit connected to antenna or amplifier for uplink transmissions require separate equipment authorization. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna colocation requirements of §1.1307(b)(3), for satisfying RF exposure compliance. Class B Booster is fix location installation only according to §90.219(d)(4) and it is limited to deployed only up to 5 Watt maximum ERP requirement of §90.219(d)(3). RF exposure will be addressed at time of installation and the use of higher gain antennas may require larger separation distances.

PF:	Transmitter approved for Public Safety Broadband

TCB Grant - Application fmCpxK4PA8s57CbREK2Psg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131

Date of Grant: 09/19/2018 Application Dated: 09/18/2018

SOLiD, Inc.

10,9th Floor, SOLiD Space, Pangyoyeok-ro 220,

Bundang-gu,

Seongnam-si, Gyeonggi-do, 463-400 South Korea

Attention: Yong Chul Kim , Team Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	W6UL781921
Name of Grantee:	SOLiD, Inc.
Equipment Class:	Part 20 Industrial Booster (CMRS)
Notes:	ALLIANCE_2W

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	27	729.0  -  758.0	2.094	Amp	G7W
	90S	862.0  -  869.0	2.183	Amp	G7W
	90S	862.0  -  869.0	2.056	Amp	F9W
	22H	869.0  -  894.0	2.143	Amp	G7W
	22H	869.0  -  894.0	2.104	Amp	G7W
	22H	869.0  -  894.0	2.128	Amp	F9W
	24E	1930.0  -  1995.0	2.123	Amp	G7W
	24E	1930.0  -  1995.0	2.158	Amp	F9W
	24E	1930.0  -  1995.0	2.133	Amp	F9W
	24E	1930.0  -  1995.0	2.061	Amp	GXW
	27	2110.0  -  2180.0	2.061	Amp	G7W
	27	2110.0  -  2180.0	1.95	Amp	F9W
	27	2110.0  -  2180.0	2.109	Amp	F9W

In-Building DAS. Output power is conducted. Device supports GSM, CDMA, WCDMA, LTE 5, 10, and 20MHz modulation. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing, and excluding any other devices connected to the (uplink) transmit output terminal of the base station interface unit. This application covers only the system configuration with base interface unit connected to a base station RF port in the uplink transmit path; operations of this remote unit if any in a system with base interface unit connected to antenna or amplifier for uplink transmissions require separate equipment authorization. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Sec. 1.1307(b)(3), for satisfying RF exposure compliance. RF exposure will be addressed at time of installation and licensing, and the use of higher gain antennas may require larger separation distances as well.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

SOLiD, Inc. 10,9th Floor, SOLiD Space, Pangyoyeok-ro 220, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 South Korea

Date of Grant: 09/19/2018 Application Dated: 09/18/2018

Attention: Yong Chul Kim , Team Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	W6UL781921
Name of Grantee:	SOLiD, Inc.
Equipment Class:	Part 20 Industrial Booster (CMRS)
Notes:	ALLIANCE_2W
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	27	729.0  -  758.0	2.094	Amp	G7W
	90S	862.0  -  869.0	2.183	Amp	G7W
	90S	862.0  -  869.0	2.056	Amp	F9W
	22H	869.0  -  894.0	2.143	Amp	G7W
	22H	869.0  -  894.0	2.104	Amp	G7W
	22H	869.0  -  894.0	2.128	Amp	F9W
	24E	1930.0  -  1995.0	2.123	Amp	G7W
	24E	1930.0  -  1995.0	2.158	Amp	F9W
	24E	1930.0  -  1995.0	2.133	Amp	F9W
	24E	1930.0  -  1995.0	2.061	Amp	GXW
	27	2110.0  -  2180.0	2.061	Amp	G7W
	27	2110.0  -  2180.0	1.95	Amp	F9W
	27	2110.0  -  2180.0	2.109	Amp	F9W

In-Building DAS. Output power is conducted. Device supports GSM, CDMA, WCDMA, LTE 5, 10, and 20MHz modulation. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing, and excluding any other devices connected to the (uplink) transmit output terminal of the base station interface unit. This application covers only the system configuration with base interface unit connected to a base station RF port in the uplink transmit path; operations of this remote unit if any in a system with base interface unit connected to antenna or amplifier for uplink transmissions require separate equipment authorization. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Sec. 1.1307(b)(3), for satisfying RF exposure compliance. RF exposure will be addressed at time of installation and licensing, and the use of higher gain antennas may require larger separation distances as well.

Mail To: