FCC ID W7OMRF24J40MDME
IEEE 802.15.4 RF Transceiver Module
by Microchip Technology Incorporated
Grantee Code: W7O Product Code: MRF24J40MDME
Latest application date: 2015-01-13
FCC ID Device Details
| FCC ID | W7OMRF24J40MDME |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | W7O |
| Product Code | MRF24J40MDME |
| Applicant Business | Microchip Technology Incorporated 🇺🇸 |
| Related Domains |  microchip.com |
| Equipment Class | IEEE 802.15.4 RF Transceiver Module |
| Test Firm | SMART EC Product Testing Services |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2405-2475 MHz | Class II permissive change or modification of presently authorized equipment | 2015-01-13 |
| 2405-2475 MHz | Original Equipment | 2014-03-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2015-01-13 | PDF 5.2 MB |
| User Manual | Users Manual | 2014-03-06 | PDF 941.4 KB |
| Internal Photos | Internal Photos | 2015-01-13 | PDF 2.6 MB |
| Internal Photos | Internal Photos | 2014-03-06 | PDF 57.7 KB |
| External PHotos | External Photos | 2015-01-13 | PDF 44.1 KB |
| External Photos | External Photos | 2015-01-13 | PDF 78.5 KB |
| External Photos | External Photos | 2014-03-06 | PDF 43.9 KB |
| Label and Location | ID Label/Location Info | 2014-03-06 | PDF 44.4 KB |
| Block Diagram | Block Diagram | 2014-03-06 | PDF 79.2 KB |
| Schematics | Schematics | 2014-03-06 | PDF 135.4 KB |
| Description | Operational Description | 2014-03-06 | PDF 7.7 KB |
| Test Setup Photos | Test Setup Photos | 2015-01-13 | PDF 137.1 KB |
| Test Setup Photos | Test Setup Photos | 2014-03-06 | PDF 1 MB |
| RF Exposure Info MPE | RF Exposure Info | 2014-03-06 | PDF 182.8 KB |
| Test Report DTS | Test Report | 2014-03-06 | PDF 531.3 KB |
| Agent Authorization letter | Cover Letter(s) | 2015-01-13 | PDF 31.5 KB |
| Cover letter | Cover Letter(s) | 2015-01-13 | PDF 352.2 KB |
| compliance opinion | Cover Letter(s) | 2015-01-13 | PDF 20.5 KB |
| Authorization Letter | Cover Letter(s) | 2014-03-06 | PDF 38.1 KB |
| Modular Approval Letter | Cover Letter(s) | 2014-03-06 | PDF 103.9 KB |
| SAR report | RF Exposure Info | 2015-01-13 | PDF 2.1 MB |
Application Information
| Application ID | i7XV9FuuR8for6GdK1Xjaw== |
|---|---|
| Final Action Date | 2015-01-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018576819 |
| Model | MRF24J40MDME |
| Frequency Range | 2405-2475 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | IEEE 802.15.4 RF Transceiver Module |
| Responsible Party | Steve Caldwell, Director, Wireless Product Division, steve.caldwell@microchip.com , 480-792-7464 |
| Test Firm | Teresa Kaczmarowski, SMART EC Product Testing Services, Teresa.Kaczmarowski@smartembedded.com  , 602 437 6898 |
| TCB Email | dghizzone@nwemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This permissive change is to request approval for a portable RF exposure category for chip MRF24J40MC used in a specific host handheld winch controller, model number: Zeon Platinum Winch. The highest measured body SAR value is: 0.29 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| i7XV9FuuR8for6GdK1Xjaw== | 2015-01-13 | Class II permissive change or modification of presently authorized equipment |
| Do0Ku9TZvXKZXvA9X8shPg== | 2014-03-06 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2405-2475 MHz | 0.1150000 | 15C |
Grants
TCB Grant - Application i7XV9FuuR8for6GdK1Xjaw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 01/13/2015 Application Dated: 01/13/2015 |
| Microchip Technology Incorporated |
| 2355 W. Chandler Blvd. |
| Chandler, AZ 85224 |
| Attention: Steve Caldwell , Director, Wireless Product Division |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W7OMRF24J40MDME |
| Name of Grantee: | Microchip Technology Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.15.4 RF Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.115 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This permissive change is to request approval for a portable RF exposure category for chip MRF24J40MC used in a specific host handheld winch controller, model number: Zeon Platinum Winch. The highest measured body SAR value is: 0.29 W/kg. |
EAS Grant - Application i7XV9FuuR8for6GdK1Xjaw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Microchip Technology Incorporated 2355 W. Chandler Blvd. Chandler, AZ 85224 United States |
Date of Grant: 01/13/2015 Application Dated: 01/13/2015 |
| Attention: Steve Caldwell , Director, Wireless Product Division |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W7OMRF24J40MDME |
| Name of Grantee: | Microchip Technology Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.15.4 RF Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.115 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This permissive change is to request approval for a portable RF exposure category for chip MRF24J40MC used in a specific host handheld winch controller, model number: Zeon Platinum Winch. The highest measured body SAR value is: 0.29 W/kg. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/06/2014 Application Dated: 03/06/2014 |
| Microchip Technology Incorporated |
| 2355 W. Chandler Blvd. |
| Chandler, AZ 85224 |
| Attention: Steve Caldwell , Director, Wireless Product Division |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W7OMRF24J40MDME |
| Name of Grantee: | Microchip Technology Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.15.4 RF Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.115 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application Do0Ku9TZvXKZXvA9X8shPg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Microchip Technology Incorporated 2355 W. Chandler Blvd. Chandler, AZ 85224 United States |
Date of Grant: 03/06/2014 Application Dated: 03/06/2014 |
| Attention: Steve Caldwell , Director, Wireless Product Division |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W7OMRF24J40MDME |
| Name of Grantee: | Microchip Technology Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.15.4 RF Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2475.0 | 0.115 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |