FCC ID W7Z-ZICM357SP2
ZigBee Development Kit
by California Eastern Laboratories
Grantee Code: W7Z Product Code: ZICM357SP2
Latest application date: 2013-06-26
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2405-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-06-26 |
| 2405-2480 MHz | Original Equipment | 2012-06-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| external antenna trace instructions | Users Manual | 2013-06-26 | PDF 126.7 KB |
| manual | Users Manual | 2013-06-26 | PDF 832.5 KB |
| manual | Users Manual | 2012-06-01 | PDF 1 MB |
| Id label | ID Label/Location Info | 2012-06-01 | PDF 318.6 KB |
| external photos | External Photos | 2012-06-01 | PDF 318.6 KB |
| internal photos | Internal Photos | 2012-06-01 | PDF 318.6 KB |
| external photos | External Photos | 2013-06-26 | PDF 994.3 KB |
| test setup photos | Test Setup Photos | 2013-06-26 | PDF 454.6 KB |
| test setup photos | Test Setup Photos | 2012-06-01 | PDF 2.1 MB |
| MPE info | RF Exposure Info | 2013-06-26 | PDF 91.6 KB |
| test report | Test Report | 2013-06-26 | PDF 1.1 MB |
| MPE info | RF Exposure Info | 2012-06-01 | PDF 140.7 KB |
| test report | Test Report | 2012-06-01 | PDF 2.9 MB |
| agent letter | Cover Letter(s) | 2013-06-26 | PDF 33.1 KB |
| reason for class II change letter | Cover Letter(s) | 2013-06-26 | PDF 67.3 KB |
| agent letter | Cover Letter(s) | 2012-06-01 | PDF 32.6 KB |
| confidentiality request letter | Cover Letter(s) | 2012-06-01 | PDF 33.8 KB |
| cover letter | Cover Letter(s) | 2012-06-01 | PDF 15.2 KB |
| modular approval request letter | Cover Letter(s) | 2012-06-01 | PDF 30.7 KB |
Application Information
| Application ID | LL8F3tWO4ndmPI8/Ai56eA== |
|---|---|
| Final Action Date | 2013-06-26 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007032923 |
| Model | -ZICM357SP2 |
| Frequency Range | 2405-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | ZigBee Development Kit |
| Responsible Party | David Wilde, david.wilde@cel.com  , 8474696800 |
| Agent | William (Bill) William (Bill) William (Bill), D.L.S. Electronic Systems, Inc., bstumpf@dlsemc.com  , 262-279-0210 |
| Technical Contact | William (Bill) Martin Stumpf, D.L.S. Electronic Systems, bstumpf@dlsemc.com , 262-279-0210 |
| Test Firm | William Stumpf, DLS Electronic Systems, Inc., bstumpf@dlsemc.com , 262-279-0210 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This permissive change adds an external antenna for use with this modular transmitter as documented in the filing. This module can only be used with an external antenna circuit trace design in strict compliance with the OEM instructions provided. Modular Approval. Output Power is Conducted. For compliance reasons, power at the 2 highest upper band edge channels 25 and 26 must be reduced not to exceed that shown in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjuction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| LL8F3tWO4ndmPI8/Ai56eA== | 2013-06-26 | Class II permissive change or modification of presently authorized equipment |
| CB6sSN3TLXPx+Py4FZsjBw== | 2012-06-01 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2405-2480 MHz | 0.1200000 | 15C |
Grants
TCB Grant - Application LL8F3tWO4ndmPI8/Ai56eA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/26/2013 Application Dated: 06/14/2013 |
| California Eastern Laboratories |
| 4590 Patrick Henry Drrive |
| Santa Clara, CA 95054 |
| Attention: David Wilde |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W7Z-ZICM357SP2 |
| Name of Grantee: | California Eastern Laboratories |
| Equipment Class: | Digital Transmission System |
| Notes: | ZigBee Development Kit |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.12 |
| This permissive change adds an external antenna for use with this modular transmitter as documented in the filing. This module can only be used with an external antenna circuit trace design in strict compliance with the OEM instructions provided. Modular Approval. Output Power is Conducted. For compliance reasons, power at the 2 highest upper band edge channels 25 and 26 must be reduced not to exceed that shown in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjuction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application LL8F3tWO4ndmPI8/Ai56eA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
California Eastern Laboratories 4590 Patrick Henry Drrive Santa Clara, CA 95054 United States |
Date of Grant: 06/26/2013 Application Dated: 06/14/2013 |
| Attention: David Wilde |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W7Z-ZICM357SP2 |
| Name of Grantee: | California Eastern Laboratories |
| Equipment Class: | Digital Transmission System |
| Notes: | ZigBee Development Kit |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.12 |
| This permissive change adds an external antenna for use with this modular transmitter as documented in the filing. This module can only be used with an external antenna circuit trace design in strict compliance with the OEM instructions provided. Modular Approval. Output Power is Conducted. For compliance reasons, power at the 2 highest upper band edge channels 25 and 26 must be reduced not to exceed that shown in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjuction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/01/2012 Application Dated: 05/31/2012 |
| California Eastern Laboratories |
| 4590 Patrick Henry Drrive |
| Santa Clara, CA 95054 |
| Attention: David Wilde |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W7Z-ZICM357SP2 |
| Name of Grantee: | California Eastern Laboratories |
| Equipment Class: | Digital Transmission System |
| Notes: | ZigBee Development Kit |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.12 |
| Modular Approval. Output Power is Conducted. For compliance reasons, power at the 2 highest upper band edge channels 25 and 26 must be reduced not to exceed that shown in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjuction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application CB6sSN3TLXPx+Py4FZsjBw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
California Eastern Laboratories 4590 Patrick Henry Drrive Santa Clara, CA 95054 United States |
Date of Grant: 06/01/2012 Application Dated: 05/31/2012 |
| Attention: David Wilde |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | W7Z-ZICM357SP2 |
| Name of Grantee: | California Eastern Laboratories |
| Equipment Class: | Digital Transmission System |
| Notes: | ZigBee Development Kit |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2405.0 - 2480.0 | 0.12 |
| Modular Approval. Output Power is Conducted. For compliance reasons, power at the 2 highest upper band edge channels 25 and 26 must be reduced not to exceed that shown in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjuction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |