FCC ID WA7-AR5BHB112
802.11a/b/g/n 3X3 With no Beam Forming Module
by NETSCOUT Systems, Inc.
Grantee Code: WA7 Product Code: AR5BHB112
Latest application date: 2013-06-06
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2013-06-06 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-06-05 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2012-02-22 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2012-02-22 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPD-AR5BHB112 Grant Date: 12/13/2010 | 2012-01-03 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPD-AR5BHB112 Grant Date: 12/13/2010 | 2012-01-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2013-06-05 | PDF 145.5 KB |
| Internal Photos | Internal Photos | 2013-06-06 | PDF 686.6 KB |
| External Photos | External Photos | 2013-06-06 | PDF 453 KB |
| External photos | External Photos | 2012-01-03 | PDF 3 MB |
| ID Label | ID Label/Location Info | 2013-06-06 | PDF 329.9 KB |
| Label Location | ID Label/Location Info | 2013-06-06 | PDF 502 KB |
| Label format and location | ID Label/Location Info | 2012-01-03 | PDF 10.8 KB |
| Test Setup Photos | Test Setup Photos | 2013-06-06 | PDF 585.7 KB |
| Test Setup Photo | Test Setup Photos | 2012-02-22 | PDF 345.7 KB |
| UNII WLAN Report | Test Report | 2013-06-06 | PDF 2.3 MB |
| DTS WLAN Report | Test Report | 2013-06-05 | PDF 1.7 MB |
| Test Report | Test Report | 2012-02-22 | PDF 5.6 MB |
| No Beam Forming Attestation Letter | Cover Letter(s) | 2013-06-06 | PDF 186.1 KB |
| Authorization Letter | Cover Letter(s) | 2013-06-06 | PDF 91.6 KB |
| C2PC Letter Revised | Cover Letter(s) | 2013-06-06 | PDF 47.4 KB |
| Confidentiality Letter | Cover Letter(s) | 2013-06-06 | PDF 242.3 KB |
| C2PC Letter | Cover Letter(s) | 2013-06-05 | PDF 47.4 KB |
| Authorization Letter | Cover Letter(s) | 2012-02-22 | PDF 72 KB |
| C2PC | Cover Letter(s) | 2012-02-22 | PDF 60.2 KB |
| Confidentiality | Cover Letter(s) | 2012-02-22 | PDF 58.8 KB |
| Cover Letter | Cover Letter(s) | 2012-02-22 | PDF 57.5 KB |
| Agent authorization 1 of 2 | Cover Letter(s) | 2012-01-03 | PDF 72 KB |
| Agent authorization 2 of 2 | Cover Letter(s) | 2012-01-03 | PDF 67 KB |
| Authorization for change in ID | Cover Letter(s) | 2012-01-03 | PDF 40.7 KB |
| Request for change in ID | Cover Letter(s) | 2012-01-03 | PDF 13.9 KB |
Application Information
| Application ID | BplIzyGUJ14CmyA3xTn38Q== |
|---|---|
| Final Action Date | 2013-06-06 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017765199 |
| Model | -AR5BHB112 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11a/b/g/n 3X3 With no Beam Forming Module |
| Responsible Party | Brad Harper, brad.harper@flukenetworks.com  , 978-614-4000 |
| Test Firm | Rick Titus, UL LLC, Rick.A.Titus@us.ul.com  , 847-664-3281 |
| TCB Email | LST.FRE.CertNotice@ul.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change to add a new antenna type as described in this filing. Use of the new antenna requires power reduction on some channels to comply with spurious emissions at the band edge and is limited to modules installed in the enclosure described in this C2PC filing. Beam forming is disabled with this antenna configuration. Modular Approval. Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n device configurable as either a 2x3 or 3x3 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multitransmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. This device is authorized for indoor use only within the 5150~5250 MHz band. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| BplIzyGUJ14CmyA3xTn38Q== | 2013-06-06 | Class II permissive change or modification of presently authorized equipment |
| GgM/DIRsh+7Xxzs8yL5e/Q== | 2013-06-05 | Class II permissive change or modification of presently authorized equipment |
| gy+aW9JPicxHgIRZ1UbIQA== | 2012-02-22 | Class II permissive change or modification of presently authorized equipment |
| NXECUBUa/6Kxg2XDrPmChQ== | 2012-02-22 | Class II permissive change or modification of presently authorized equipment |
| etNesTWDs6uviqIof9zyrg== | 2012-01-03 | Change in identification of presently authorized equipment. Original FCC ID: PPD-AR5BHB112 Grant Date: 12/13/2010 |
| Qh0xphznVhvvLPHYlJTJ6Q== | 2012-01-03 | Change in identification of presently authorized equipment. Original FCC ID: PPD-AR5BHB112 Grant Date: 12/13/2010 |
| 5AJ92tFxWkHl9IHjkQ/uyw== | 2012-01-03 | Change in identification of presently authorized equipment. Original FCC ID: PPD-AR5BHB112 Grant Date: 12/13/2010 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2412-2462 MHz | 0.557 | 15C | CC |
| 2412-2462 MHz | 0.557 | 15C | 36, CC |
| 2412-2462 MHz | 0.574 | 15C | CC |
| 2412-2462 MHz | 0.574 | 15C | 36, CC |
| 2422-2452 MHz | 0.332 | 15C | CC |
| 2422-2452 MHz | 0.332 | 15C | 36, CC |
| 5180-5240 MHz | 0.029 | 15E | 36, CC |
| 5180-5240 MHz | 0.029 | 15E | CC |
| 5180-5240 MHz | 0.031 | 15E | 36, CC |
| 5180-5240 MHz | 0.031 | 15E | CC |
| 5190-5230 MHz | 0.048 | 15E | 36, CC |
| 5190-5230 MHz | 0.048 | 15E | CC |
| 5260-5320 MHz | 0.105 | 15E | 36, CC |
| 5260-5320 MHz | 0.105 | 15E | CC |
| 5260-5320 MHz | 0.096 | 15E | 36, CC |
| 5260-5320 MHz | 0.096 | 15E | CC |
| 5270-5310 MHz | 0.092 | 15E | 36, CC |
| 5270-5310 MHz | 0.092 | 15E | CC |
| 5500-5700 MHz | 0.106 | 15E | 36, CC |
| 5500-5700 MHz | 0.106 | 15E | CC |
| 5500-5700 MHz | 0.111 | 15E | 36, CC |
| 5500-5700 MHz | 0.111 | 15E | CC |
| 5510-5670 MHz | 0.097 | 15E | 36, CC |
| 5510-5670 MHz | 0.097 | 15E | CC |
| 5745-5825 MHz | 0.333 | 15C | CC |
| 5745-5825 MHz | 0.333 | 15C | 36, CC |
| 5745-5825 MHz | 0.338 | 15C | CC |
| 5745-5825 MHz | 0.338 | 15C | 36, CC |
| 5755-5795 MHz | 0.394 | 15C | CC |
| 5755-5795 MHz | 0.394 | 15C | 36, CC |
Grants
TCB Grant - Application Qh0xphznVhvvLPHYlJTJ6Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 01/03/2012 Application Dated: 01/03/2012 |
| Fluke Networks |
| 6920 Seaway Blvd |
| Everett, WA 98203 |
| Attention: Thomas Smith , Senior Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WA7-AR5BHB112 |
| Name of Grantee: | Fluke Networks |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n Device |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.029 | ||
| CC | 15E | 5180.0 - 5240.0 | 0.031 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.048 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.105 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.096 | ||
| CC | 15E | 5270.0 - 5310.0 | 0.092 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.106 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.111 | ||
| CC | 15E | 5510.0 - 5670.0 | 0.097 |
| Modular Approval. Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n device configurable as either a 2x3 or 3x3 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multitransmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device is authorized for indoor use only within the 5150~5250 MHz band. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Qh0xphznVhvvLPHYlJTJ6Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fluke Networks 6920 Seaway Blvd Everett, WA 98203 United States |
Date of Grant: 01/03/2012 Application Dated: 01/03/2012 |
| Attention: Thomas Smith , Senior Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WA7-AR5BHB112 |
| Name of Grantee: | Fluke Networks |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n Device |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.029 | ||
| CC | 15E | 5180.0 - 5240.0 | 0.031 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.048 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.105 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.096 | ||
| CC | 15E | 5270.0 - 5310.0 | 0.092 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.106 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.111 | ||
| CC | 15E | 5510.0 - 5670.0 | 0.097 |
| Modular Approval. Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n device configurable as either a 2x3 or 3x3 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multitransmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device is authorized for indoor use only within the 5150~5250 MHz band. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 02/22/2012 Application Dated: 02/22/2012 |
| Fluke Networks |
| 6920 Seaway Blvd |
| Everett, WA 98203 |
| Attention: Thomas Smith , Senior Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WA7-AR5BHB112 |
| Name of Grantee: | Fluke Networks |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.029 | ||
| CC | 15E | 5180.0 - 5240.0 | 0.031 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.048 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.105 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.096 | ||
| CC | 15E | 5270.0 - 5310.0 | 0.092 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.106 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.111 | ||
| CC | 15E | 5510.0 - 5670.0 | 0.097 |
| Class II permissive change filing as documented in this filing. Modular Approval. Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n client device configurable as either a 2x3 or 3x3 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multitransmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application NXECUBUa/6Kxg2XDrPmChQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fluke Networks 6920 Seaway Blvd Everett, WA 98203 United States |
Date of Grant: 02/22/2012 Application Dated: 02/22/2012 |
| Attention: Thomas Smith , Senior Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WA7-AR5BHB112 |
| Name of Grantee: | Fluke Networks |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.029 | ||
| CC | 15E | 5180.0 - 5240.0 | 0.031 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.048 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.105 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.096 | ||
| CC | 15E | 5270.0 - 5310.0 | 0.092 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.106 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.111 | ||
| CC | 15E | 5510.0 - 5670.0 | 0.097 |
| Class II permissive change filing as documented in this filing. Modular Approval. Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n client device configurable as either a 2x3 or 3x3 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multitransmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 02/22/2012 Application Dated: 02/22/2012 |
| Fluke Networks |
| 6920 Seaway Blvd |
| Everett, WA 98203 |
| Attention: Thomas Smith , Senior Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WA7-AR5BHB112 |
| Name of Grantee: | Fluke Networks |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.557 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.574 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.332 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.333 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.338 | ||
| CC | 15C | 5755.0 - 5795.0 | 0.394 |
| Class II permissive change filing as documented in this filing. Modular Approval. Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n client device configurable as either a 2x3 or 3x3 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multitransmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application gy+aW9JPicxHgIRZ1UbIQA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fluke Networks 6920 Seaway Blvd Everett, WA 98203 United States |
Date of Grant: 02/22/2012 Application Dated: 02/22/2012 |
| Attention: Thomas Smith , Senior Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WA7-AR5BHB112 |
| Name of Grantee: | Fluke Networks |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.557 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.574 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.332 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.333 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.338 | ||
| CC | 15C | 5755.0 - 5795.0 | 0.394 |
| Class II permissive change filing as documented in this filing. Modular Approval. Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n client device configurable as either a 2x3 or 3x3 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multitransmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/05/2013 Application Dated: 06/05/2013 |
| NETSCOUT Systems, Inc. |
| 310 Littleton Road |
| Westford, MA 01886-4105 |
| Attention: Brad Harper |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WA7-AR5BHB112 |
| Name of Grantee: | NETSCOUT Systems, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n 3X3 With no Beam Forming Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15C | 2412.0 - 2462.0 | 0.557 | ||
| 36 CC | 15C | 2412.0 - 2462.0 | 0.574 | ||
| 36 CC | 15C | 2422.0 - 2452.0 | 0.332 | ||
| 36 CC | 15C | 5745.0 - 5825.0 | 0.333 | ||
| 36 CC | 15C | 5745.0 - 5825.0 | 0.338 | ||
| 36 CC | 15C | 5755.0 - 5795.0 | 0.394 |
| Class II permissive change to add a new antenna type as described in this filing. Use of the new antenna requires power reduction on some channels to comply with spurious emissions at the band edge and is limited to modules installed in the enclosure described in this C2PC filing. Beam forming is disabled with this antenna configuration. Modular Approval. Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n device configurable as either a 2x3 or 3x3 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multitransmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application GgM/DIRsh+7Xxzs8yL5e/Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
NETSCOUT Systems, Inc. 310 Littleton Road Westford, MA 01886-4105 United States |
Date of Grant: 06/05/2013 Application Dated: 06/05/2013 |
| Attention: Brad Harper |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WA7-AR5BHB112 |
| Name of Grantee: | NETSCOUT Systems, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n 3X3 With no Beam Forming Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15C | 2412.0 - 2462.0 | 0.557 | ||
| 36 CC | 15C | 2412.0 - 2462.0 | 0.574 | ||
| 36 CC | 15C | 2422.0 - 2452.0 | 0.332 | ||
| 36 CC | 15C | 5745.0 - 5825.0 | 0.333 | ||
| 36 CC | 15C | 5745.0 - 5825.0 | 0.338 | ||
| 36 CC | 15C | 5755.0 - 5795.0 | 0.394 |
| Class II permissive change to add a new antenna type as described in this filing. Use of the new antenna requires power reduction on some channels to comply with spurious emissions at the band edge and is limited to modules installed in the enclosure described in this C2PC filing. Beam forming is disabled with this antenna configuration. Modular Approval. Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n device configurable as either a 2x3 or 3x3 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multitransmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 01/03/2012 Application Dated: 01/03/2012 |
| Fluke Networks |
| 6920 Seaway Blvd |
| Everett, WA 98203 |
| Attention: Thomas Smith , Senior Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WA7-AR5BHB112 |
| Name of Grantee: | Fluke Networks |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 802.11a/b/g/n Device |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application etNesTWDs6uviqIof9zyrg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fluke Networks 6920 Seaway Blvd Everett, WA 98203 United States |
Date of Grant: 01/03/2012 Application Dated: 01/03/2012 |
| Attention: Thomas Smith , Senior Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WA7-AR5BHB112 |
| Name of Grantee: | Fluke Networks |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 802.11a/b/g/n Device |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/06/2013 Application Dated: 06/05/2013 |
| NETSCOUT Systems, Inc. |
| 310 Littleton Road |
| Westford, MA 01886-4105 |
| Attention: Brad Harper |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WA7-AR5BHB112 |
| Name of Grantee: | NETSCOUT Systems, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n 3X3 With no Beam Forming Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15E | 5180.0 - 5240.0 | 0.029 | ||
| 36 CC | 15E | 5180.0 - 5240.0 | 0.031 | ||
| 36 CC | 15E | 5190.0 - 5230.0 | 0.048 | ||
| 36 CC | 15E | 5260.0 - 5320.0 | 0.105 | ||
| 36 CC | 15E | 5260.0 - 5320.0 | 0.096 | ||
| 36 CC | 15E | 5270.0 - 5310.0 | 0.092 | ||
| 36 CC | 15E | 5500.0 - 5700.0 | 0.106 | ||
| 36 CC | 15E | 5500.0 - 5700.0 | 0.111 | ||
| 36 CC | 15E | 5510.0 - 5670.0 | 0.097 |
| Class II permissive change to add a new antenna type as described in this filing. Use of the new antenna requires power reduction on some channels to comply with spurious emissions at the band edge and is limited to modules installed in the enclosure described in this C2PC filing. Beam forming is disabled with this antenna configuration. Modular Approval. Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n device configurable as either a 2x3 or 3x3 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multitransmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. This device is authorized for indoor use only within the 5150~5250 MHz band. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application BplIzyGUJ14CmyA3xTn38Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
NETSCOUT Systems, Inc. 310 Littleton Road Westford, MA 01886-4105 United States |
Date of Grant: 06/06/2013 Application Dated: 06/05/2013 |
| Attention: Brad Harper |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WA7-AR5BHB112 |
| Name of Grantee: | NETSCOUT Systems, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n 3X3 With no Beam Forming Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC | 15E | 5180.0 - 5240.0 | 0.029 | ||
| 36 CC | 15E | 5180.0 - 5240.0 | 0.031 | ||
| 36 CC | 15E | 5190.0 - 5230.0 | 0.048 | ||
| 36 CC | 15E | 5260.0 - 5320.0 | 0.105 | ||
| 36 CC | 15E | 5260.0 - 5320.0 | 0.096 | ||
| 36 CC | 15E | 5270.0 - 5310.0 | 0.092 | ||
| 36 CC | 15E | 5500.0 - 5700.0 | 0.106 | ||
| 36 CC | 15E | 5500.0 - 5700.0 | 0.111 | ||
| 36 CC | 15E | 5510.0 - 5670.0 | 0.097 |
| Class II permissive change to add a new antenna type as described in this filing. Use of the new antenna requires power reduction on some channels to comply with spurious emissions at the band edge and is limited to modules installed in the enclosure described in this C2PC filing. Beam forming is disabled with this antenna configuration. Modular Approval. Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n device configurable as either a 2x3 or 3x3 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multitransmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. This device is authorized for indoor use only within the 5150~5250 MHz band. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 01/03/2012 Application Dated: 01/03/2012 |
| Fluke Networks |
| 6920 Seaway Blvd |
| Everett, WA 98203 |
| Attention: Thomas Smith , Senior Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WA7-AR5BHB112 |
| Name of Grantee: | Fluke Networks |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.557 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.574 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.332 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.333 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.338 | ||
| CC | 15C | 5755.0 - 5795.0 | 0.394 |
| Modular Approval. Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n client device configurable as either a 2x3 or 3x3 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multitransmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 5AJ92tFxWkHl9IHjkQ/uyw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fluke Networks 6920 Seaway Blvd Everett, WA 98203 United States |
Date of Grant: 01/03/2012 Application Dated: 01/03/2012 |
| Attention: Thomas Smith , Senior Test Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WA7-AR5BHB112 |
| Name of Grantee: | Fluke Networks |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.557 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.574 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.332 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.333 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.338 | ||
| CC | 15C | 5755.0 - 5795.0 | 0.394 |
| Modular Approval. Power Output listed is the maximum combined conducted output power. Device is an 802.11a/b/g/n client device configurable as either a 2x3 or 3x3 Spatial Multiplexing MIMO, as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multitransmitter product procedures. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |