FCC ID WAP-CMM1
IEEE 802.11 b/g/n MAC/baseband/radio and Bluetooth 5.2 IoT Module
by Cypress Semiconductor
Grantee Code: WAP Product Code: CMM1
Latest application date: 2022-09-02
FCC ID Device Details
| FCC ID | WAP-CMM1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | WAP |
| Product Code | CMM1 |
| Applicant Business | Cypress Semiconductor 🇺🇸 |
| Related Domains |  infineon.com |
| Equipment Class | IEEE 802.11 b/g/n MAC/baseband/radio and Bluetooth 5.2 IoT Module |
| Test Firm | Sporton International Inc. Hsinhua Laboratory |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CU544 Grant Date: 07/26/2022 | 2022-09-02 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CU544 Grant Date: 07/26/2022 | 2022-09-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2022-12-01 | PDF 850.9 KB |
| External Photos | External Photos | 2022-12-01 | PDF 639.5 KB |
| Label | ID Label/Location Info | 2022-09-02 | PDF 63.7 KB |
| Change ID Request | Cover Letter(s) | 2022-09-02 | PDF 32.1 KB |
| LOA | Cover Letter(s) | 2022-09-02 | PDF 32.4 KB |
| LOA from Original Grantee | Cover Letter(s) | 2022-09-02 | PDF 100.7 KB |
| Model Deviation | Cover Letter(s) | 2022-09-02 | PDF 30.9 KB |
| ST Confidentiality Request | Cover Letter(s) | 2022-09-02 | PDF 32.9 KB |
Application Information
| Application ID | o5H0tG1w4Tu4IaOPfmWZug== |
|---|---|
| Final Action Date | 2022-09-02 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CU544 Grant Date: 07/26/2022 |
| Applicant FRN | 0017759150 |
| Model | CMM1 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | IEEE 802.11 b/g/n MAC/baseband/radio and Bluetooth 5.2 IoT Module |
| Responsible Party | Juan Martinez, Senor System Engineer, juan.martinez2@infineon.com , 8317446217 |
| Test Firm | Alex Chen, Sporton International Inc. Hsinhua Laboratory, alex@sporton.com.tw  , 886-3-327-3456 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/01/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 MHz modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| o5H0tG1w4Tu4IaOPfmWZug== | 2022-09-02 | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CU544 Grant Date: 07/26/2022 |
| D6U9SvTPItWIdQfI+a84yw== | 2022-09-02 | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CU544 Grant Date: 07/26/2022 |
Equipment Authorization
Grants
TCB Grant - Application o5H0tG1w4Tu4IaOPfmWZug==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/02/2022 Application Dated: 09/01/2022 |
| Cypress Semiconductor |
| 198 Champion Court |
| San Jose, CA 95134 |
| Attention: Juan Martinez , Senor System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WAP-CMM1 |
| Name of Grantee: | Cypress Semiconductor |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11 b/g/n MAC/baseband/radio and Bluetooth 5.2 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0071 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1225 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application o5H0tG1w4Tu4IaOPfmWZug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cypress Semiconductor 198 Champion Court San Jose, CA 95134 United States |
Date of Grant: 09/02/2022 Application Dated: 09/01/2022 |
| Attention: Juan Martinez , Senor System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WAP-CMM1 |
| Name of Grantee: | Cypress Semiconductor |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11 b/g/n MAC/baseband/radio and Bluetooth 5.2 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0071 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1225 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/02/2022 Application Dated: 09/01/2022 |
| Cypress Semiconductor |
| 198 Champion Court |
| San Jose, CA 95134 |
| Attention: Juan Martinez , Senor System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WAP-CMM1 |
| Name of Grantee: | Cypress Semiconductor |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE 802.11 b/g/n MAC/baseband/radio and Bluetooth 5.2 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0109 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application D6U9SvTPItWIdQfI+a84yw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cypress Semiconductor 198 Champion Court San Jose, CA 95134 United States |
Date of Grant: 09/02/2022 Application Dated: 09/01/2022 |
| Attention: Juan Martinez , Senor System Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WAP-CMM1 |
| Name of Grantee: | Cypress Semiconductor |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE 802.11 b/g/n MAC/baseband/radio and Bluetooth 5.2 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0109 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |