FCC ID WBV-AP130
Access Point
by Aerohive Networks, Inc.
Grantee Code: WBV Product Code: AP130
Latest application date: 2015-07-23
FCC ID Device Details
| FCC ID | WBV-AP130 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | WBV |
| Product Code | AP130 |
| Applicant Business | Aerohive Networks, Inc. 🇺🇸 |
| Related Domains |  aerohive.com |
| Equipment Class | Access Point |
| Test Firm | SIEMIC Labs |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2015-07-23 |
| 5180-5240 MHz | Original Equipment | 2015-02-12 |
| 2412-2462 MHz | Original Equipment | 2015-02-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2015-08-11 | PDF 1.5 MB |
| Internal Photos | Internal Photos | 2015-08-11 | PDF 1.9 MB |
| External Photos | External Photos | 2015-08-11 | PDF 146 KB |
| Label & Location Info | ID Label/Location Info | 2015-02-12 | PDF 36.3 KB |
| Test Setup Photos | Test Setup Photos | 2015-08-11 | PDF 309.6 KB |
| Test Setup Photos | Test Setup Photos | 2015-07-23 | PDF 380.7 KB |
| DFS Test Report | Test Report | 2015-07-23 | PDF 2.8 MB |
| Test Report | Test Report | 2015-07-23 | PDF 3.1 MB |
| WBV-AP130_Co-Location Report | Test Report | 2015-02-12 | PDF 117.4 KB |
| WBV-AP130_FCC RF Test Report_15.247_Rev01 | Test Report | 2015-02-12 | PDF 1.7 MB |
| WBV-AP130_FCC RF Test Report_15.407 | Test Report | 2015-02-12 | PDF 1.7 MB |
| Professional Installer Attestation | Cover Letter(s) | 2015-07-23 | PDF 42.8 KB |
| Authorization Letter | Cover Letter(s) | 2015-07-23 | PDF 41.7 KB |
| Confidentiality Letter | Cover Letter(s) | 2015-07-23 | PDF 102.8 KB |
| POA | Cover Letter(s) | 2015-07-23 | PDF 51.9 KB |
| Permissive Change Letter | Cover Letter(s) | 2015-07-23 | PDF 32 KB |
| WBV-AP130_Confidential Letter | Cover Letter(s) | 2015-02-12 | PDF 52.4 KB |
| WBV-AP130_DoC Letter | Cover Letter(s) | 2015-02-12 | PDF 18.9 KB |
| WBV-AP130_POA | Cover Letter(s) | 2015-02-12 | PDF 19.9 KB |
| WBV-AP130_Project and Product Certification Representative Auth Letter_Rev01 | Cover Letter(s) | 2015-02-12 | PDF 18 KB |
| MPE Calculation | RF Exposure Info | 2015-07-23 | PDF 142.5 KB |
| WBV-AP130_Human Exposure | RF Exposure Info | 2015-02-12 | PDF 124.7 KB |
| Software Security Description Metadata only | Operational Description | PDF 110.6 KB | |
| Software Security Description_Revised Metadata only | Operational Description | PDF 110.3 KB | |
| Software Security Metadata only | SDR Software/Security Inf | PDF 110.6 KB |
Application Information
| Application ID | MF5Etx3n+/1K6hxTYSfa4Q== |
|---|---|
| Final Action Date | 2015-07-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017789793 |
| Model | AP130 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Access Point |
| Responsible Party | Tim Wakeley, Compliance Manager, twakeley@aerohive.com , 408-470-4926 |
| Test Firm | Leslie BAI, SIEMIC Labs, leslie.bai@siemic.com  , 4085261188 |
| TCB Email | tcb@siemic.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | C2CP to add DFS bands via software. This device is indoor AP Per 15.407a(1)(ii). Power listed is the combined maximum peak conducted output power. 5150-5250MHz is restricted for indoor use only. Device contains 20/40/80 MHz signal bandwidth. Device is an 802.11a/b/g/n/ac AP operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| MF5Etx3n+/1K6hxTYSfa4Q== | 2015-07-23 | Class II permissive change or modification of presently authorized equipment |
| G3LZEw6jjmStZM/0F4itIw== | 2015-02-12 | Original Equipment |
| 3zwO/GQNuMeaH1GcJ3DhNA== | 2015-02-12 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application MF5Etx3n+/1K6hxTYSfa4Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 07/23/2015 Application Dated: 06/02/2015 |
| Aerohive Networks, Inc. |
| 1011 McCarthy Blvd |
| Milpitas, CA 95035 |
| Attention: Tim Wakeley , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WBV-AP130 |
| Name of Grantee: | Aerohive Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.146 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.143 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.151 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.134 |
| C2CP to add DFS bands via software. This device is indoor AP Per 15.407a(1)(ii). Power listed is the combined maximum peak conducted output power. 5150-5250MHz is restricted for indoor use only. Device contains 20/40/80 MHz signal bandwidth. Device is an 802.11a/b/g/n/ac AP operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application MF5Etx3n+/1K6hxTYSfa4Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Aerohive Networks, Inc. 1011 McCarthy Blvd Milpitas, CA 95035 United States |
Date of Grant: 07/23/2015 Application Dated: 06/02/2015 |
| Attention: Tim Wakeley , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WBV-AP130 |
| Name of Grantee: | Aerohive Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.146 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.143 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.151 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.134 |
| C2CP to add DFS bands via software. This device is indoor AP Per 15.407a(1)(ii). Power listed is the combined maximum peak conducted output power. 5150-5250MHz is restricted for indoor use only. Device contains 20/40/80 MHz signal bandwidth. Device is an 802.11a/b/g/n/ac AP operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/12/2015 Application Dated: 02/11/2015 |
| Aerohive Networks, Inc. |
| 330 Gibraltar Drive |
| Sunnyvale, CA 94089 |
| Attention: Colin Wilson , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WBV-AP130 |
| Name of Grantee: | Aerohive Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.146 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.134 |
| This device is indoor AP Per 15.407a(1)(ii) Power listed is the combined maximum peak conducted output power 5150-5250MHz is restricted for indoor use only. Device contains 20/40 and 80 MHz signal bandwidth. Device is an 802.11a/b/g/n/ac AP operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured, installed or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application G3LZEw6jjmStZM/0F4itIw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Aerohive Networks, Inc. 330 Gibraltar Drive Sunnyvale, CA 94089 United States |
Date of Grant: 02/12/2015 Application Dated: 02/11/2015 |
| Attention: Colin Wilson , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WBV-AP130 |
| Name of Grantee: | Aerohive Networks, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.146 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.134 |
| This device is indoor AP Per 15.407a(1)(ii) Power listed is the combined maximum peak conducted output power 5150-5250MHz is restricted for indoor use only. Device contains 20/40 and 80 MHz signal bandwidth. Device is an 802.11a/b/g/n/ac AP operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured, installed or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/12/2015 Application Dated: 02/11/2015 |
| Aerohive Networks, Inc. |
| 330 Gibraltar Drive |
| Sunnyvale, CA 94089 |
| Attention: Colin Wilson , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WBV-AP130 |
| Name of Grantee: | Aerohive Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.183 |
| Power listed is the combined maximum peak conducted output power Device is a 802.11a/b/g/n/ac AP operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 3zwO/GQNuMeaH1GcJ3DhNA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Aerohive Networks, Inc. 330 Gibraltar Drive Sunnyvale, CA 94089 United States |
Date of Grant: 02/12/2015 Application Dated: 02/11/2015 |
| Attention: Colin Wilson , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WBV-AP130 |
| Name of Grantee: | Aerohive Networks, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.183 |
| Power listed is the combined maximum peak conducted output power Device is a 802.11a/b/g/n/ac AP operating in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |