FCC ID WFQIN610
RF ID Interrogator
by RF Controls, LLC
Grantee Code: WFQ Product Code: IN610
Latest application date: 2013-01-17
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.3-927.75 MHz | Class II permissive change or modification of presently authorized equipment | 2013-01-17 |
| 902.3-927.75 MHz | Change in identification of presently authorized equipment. Original FCC ID: M4ZIN610 Grant Date: 10/06/2011 | 2012-11-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users_Guide 610 | Users Manual | 2013-01-17 | PDF 4.3 MB |
| Users_Guide A-200 and A-202 | Users Manual | 2013-01-17 | PDF 545.9 KB |
| A-200 Request for Confidentiality (Internal Photos) | Cover Letter(s) | 2013-01-17 | PDF 217.9 KB |
| A-202 Request for Confidentiality (Internal Photos) | Cover Letter(s) | 2013-01-17 | PDF 221.5 KB |
| External Photos A200 | External Photos | 2013-01-17 | PDF 1 MB |
| External Photos A202 | External Photos | 2013-01-17 | PDF 1.1 MB |
| External Photos | External Photos | 2012-11-21 | PDF 810.4 KB |
| ID Label | ID Label/Location Info | 2013-01-17 | PDF 379.9 KB |
| ID Label | ID Label/Location Info | 2012-11-21 | PDF 341.6 KB |
| Test Setup Photos A200 | Test Setup Photos | 2013-01-17 | PDF 330.4 KB |
| Test Setup Photos A202 | Test Setup Photos | 2013-01-17 | PDF 333.5 KB |
| Test Report A200 | Test Report | 2013-01-17 | PDF 1.3 MB |
| Test Report A202 | Test Report | 2013-01-17 | PDF 1.3 MB |
| A-200 Request for Class II Permissive Change | Cover Letter(s) | 2013-01-17 | PDF 224.8 KB |
| A-200 Request for Confidentiality | Cover Letter(s) | 2013-01-17 | PDF 113.6 KB |
| A-202 Request for Class II Permissive Change | Cover Letter(s) | 2013-01-17 | PDF 224.4 KB |
| A-202 Request for Confidentiality | Cover Letter(s) | 2013-01-17 | PDF 113.6 KB |
| Authorization Letter | Cover Letter(s) | 2013-01-17 | PDF 223.6 KB |
| Application Letter | Cover Letter(s) | 2012-11-21 | PDF 90 KB |
| ID Change Auth | Cover Letter(s) | 2012-11-21 | PDF 224.6 KB |
| MPE | RF Exposure Info | 2013-01-17 | PDF 73.9 KB |
Application Information
| Application ID | T4NfCxXq1ZpOVkfNM4XQIw== |
|---|---|
| Final Action Date | 2013-01-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017890542 |
| Model | IN610 |
| Frequency Range | 902.3-927.75 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RF ID Interrogator |
| Responsible Party | Graham Bloy, Chief Technical Officer, gpbloy@rf-controls.com  , 3144817600 |
| Test Firm | Rick Titus, UL LLC, Rick.A.Titus@us.ul.com  , 847-664-3281 |
| TCB Email | LST.FRE.CertNotice@ul.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change to add additional high gain antennas as documented in this filing. Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 23 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| T4NfCxXq1ZpOVkfNM4XQIw== | 2013-01-17 | Class II permissive change or modification of presently authorized equipment |
| K/AkVzV94wZR7kBsx7OIQQ== | 2012-11-21 | Change in identification of presently authorized equipment. Original FCC ID: M4ZIN610 Grant Date: 10/06/2011 |
Equipment Authorization
Grants
TCB Grant - Application T4NfCxXq1ZpOVkfNM4XQIw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 01/17/2013 Application Dated: 01/17/2013 |
| RF Controls, LLC |
| 1400 South 3rd Street |
| Suite 220 |
| St Louis, MO 63104-4430 |
| Attention: Graham Bloy , Chief Technical Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WFQIN610 |
| Name of Grantee: | RF Controls, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF ID Interrogator |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 902.3 - 927.75 | 1.0 |
| Class II permissive change to add additional high gain antennas as documented in this filing. Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 23 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
EAS Grant - Application T4NfCxXq1ZpOVkfNM4XQIw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
RF Controls, LLC 1400 South 3rd Street Suite 220 St Louis, MO 63104-4430 United States |
Date of Grant: 01/17/2013 Application Dated: 01/17/2013 |
| Attention: Graham Bloy , Chief Technical Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WFQIN610 |
| Name of Grantee: | RF Controls, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF ID Interrogator |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 902.3 - 927.75 | 1.0 |
| Class II permissive change to add additional high gain antennas as documented in this filing. Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 23 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/21/2012 Application Dated: 11/21/2012 |
| RF Controls, LLC |
| 1400 South 3rd Street |
| Suite 220 |
| St Louis, MO 63104-4430 |
| Attention: Graham Bloy , Chief Technical Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WFQIN610 |
| Name of Grantee: | RF Controls, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Interrogator |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 927.75 | 1.0 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 23 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multitransmitter product procedures. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application K/AkVzV94wZR7kBsx7OIQQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
RF Controls, LLC 1400 South 3rd Street Suite 220 St Louis, MO 63104-4430 United States |
Date of Grant: 11/21/2012 Application Dated: 11/21/2012 |
| Attention: Graham Bloy , Chief Technical Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WFQIN610 |
| Name of Grantee: | RF Controls, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Interrogator |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.3 - 927.75 | 1.0 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be professionally installed to provide a separation distance of at least 23 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multitransmitter product procedures. Professional installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |