FCC ID WGJ-XBEEOMNI
OXWT Zigbee Module
by Meggitt Training Systems, Inc.
Grantee Code: WGJ Product Code: XBEEOMNI
Latest application date: 2012-06-01
FCC ID Device Details
| FCC ID | WGJ-XBEEOMNI |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | WGJ |
| Product Code | XBEEOMNI |
| Applicant Business | Meggitt Training Systems, Inc. 🇺🇸 |
| Related Domains |  meggitt.com |
| Equipment Class | OXWT Zigbee Module |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2410-2470 MHz | Class II permissive change or modification of presently authorized equipment | 2012-06-01 |
| 2410-2470 MHz | Change in identification of presently authorized equipment. Original FCC ID: OUR-XBEEPRO Grant Date: 11/02/2005 | 2012-04-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2012-04-12 | PDF 329.9 KB |
| Label Information | ID Label/Location Info | 2012-04-12 | PDF 193.1 KB |
| Test Setup Photos | Test Setup Photos | 2012-06-01 | PDF 200.9 KB |
| Test Report | Test Report | 2012-06-01 | PDF 151.7 KB |
| Agency Agreement | Cover Letter(s) | 2012-06-01 | PDF 205.4 KB |
| FCC Cover Letter | Cover Letter(s) | 2012-06-01 | PDF 12.2 KB |
| Agency Agreement Letter | Cover Letter(s) | 2012-04-12 | PDF 205.4 KB |
| Change in ID Authorization Letter | Cover Letter(s) | 2012-04-12 | PDF 189.3 KB |
| Change in ID Request Letter | Cover Letter(s) | 2012-04-12 | PDF 174.5 KB |
| RF Exposure | RF Exposure Info | 2012-06-01 | PDF 29.9 KB |
Application Information
| Application ID | is56z1P6YDBlglTEwj5fQg== |
|---|---|
| Final Action Date | 2012-06-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017905340 |
| Model | -XBEEOMNI |
| Frequency Range | 2410-2470 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | OXWT Zigbee Module |
| Responsible Party | Matthew Webie, Manager of Systems Engineering and Support Group, matt.webie@meggitt.com , 770-288-1415 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc., swismer@acstestlab.com  , 770-831-8048 |
| Test Firm | Randy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval. Professional installation is required. Power output listed is conducted. This is an OEM transmitter module approved for use in products operating as a mobile or fixed transmitting device. Final antenna installation and operating configurations of this transmitter including antenna gain and minimum cable loss must not exceed the EIRP of the configuration used for MPE compliance. Operations is limited to 2410-2465MHz, set by programming restrictions, for certain antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide the separation distances, as described in this filing, and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions and installation requirements to satisfy RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Power listed is continuously variable from the value listed in this entry to 0.0095W Class II Change to add new antenna type as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| is56z1P6YDBlglTEwj5fQg== | 2012-06-01 | Class II permissive change or modification of presently authorized equipment |
| FNGYgy3fEIvzc56vAWsP1A== | 2012-04-12 | Change in identification of presently authorized equipment. Original FCC ID: OUR-XBEEPRO Grant Date: 11/02/2005 |
Grants
TCB Grant - Application is56z1P6YDBlglTEwj5fQg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 06/01/2012 Application Dated: 06/01/2012 |
| Meggitt Training Systems, Inc. |
| 296 Brogdon Road |
| Suwanee, GA 30024 |
| Attention: Matthew Webie , Manager of Systems Engineering and Support Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WGJ-XBEEOMNI |
| Name of Grantee: | Meggitt Training Systems, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | OXWT Zigbee Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2410.0 - 2470.0 | 0.086 |
| Limited Modular Approval. Professional installation is required. Power output listed is conducted. This is an OEM transmitter module approved for use in products operating as a mobile or fixed transmitting device. Final antenna installation and operating configurations of this transmitter including antenna gain and minimum cable loss must not exceed the EIRP of the configuration used for MPE compliance. Operations is limited to 2410-2465MHz, set by programming restrictions, for certain antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide the separation distances, as described in this filing, and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions and installation requirements to satisfy RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Power listed is continuously variable from the value listed in this entry to 0.0095W Class II Change to add new antenna type as described in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application is56z1P6YDBlglTEwj5fQg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Meggitt Training Systems, Inc. 296 Brogdon Road P.O. Box , Suwanee, GA 30024 United States |
Date of Grant: 06/01/2012 Application Dated: 06/01/2012 |
| Attention: Matthew Webie , Manager of Systems Engineering and Support Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WGJ-XBEEOMNI |
| Name of Grantee: | Meggitt Training Systems, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | OXWT Zigbee Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2410.0 - 2470.0 | 0.086 |
| Limited Modular Approval. Professional installation is required. Power output listed is conducted. This is an OEM transmitter module approved for use in products operating as a mobile or fixed transmitting device. Final antenna installation and operating configurations of this transmitter including antenna gain and minimum cable loss must not exceed the EIRP of the configuration used for MPE compliance. Operations is limited to 2410-2465MHz, set by programming restrictions, for certain antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide the separation distances, as described in this filing, and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions and installation requirements to satisfy RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Power listed is continuously variable from the value listed in this entry to 0.0095W Class II Change to add new antenna type as described in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 04/12/2012 Application Dated: 04/12/2012 |
| Meggitt Training Systems, Inc. |
| 296 Brogdon Road |
| Suwanee, GA 30024 |
| Attention: Matthew Webie , Manager of Systems Engineering and Support Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WGJ-XBEEOMNI |
| Name of Grantee: | Meggitt Training Systems, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | OXWT Zigbee Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2410.0 - 2470.0 | 0.086 |
| Limited Modular Approval. Professional installation is required. Power output listed is conducted. This is an OEM transmitter module approved for use in products operating as a mobile or fixed transmitting device. Final antenna installation and operating configurations of this transmitter including antenna gain and minimum cable loss must not exceed the EIRP of the configuration used for MPE compliance. Operations is limited to 2410-2465MHz, set by programming restrictions, for certain antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide the separation distances, as described in this filing, and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions and installation requirements to satisfy RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Power listed is continuously variable from the value listed in this entry to 0.0095W |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application FNGYgy3fEIvzc56vAWsP1A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Meggitt Training Systems, Inc. 296 Brogdon Road P.O. Box , Suwanee, GA 30024 United States |
Date of Grant: 04/12/2012 Application Dated: 04/12/2012 |
| Attention: Matthew Webie , Manager of Systems Engineering and Support Group |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WGJ-XBEEOMNI |
| Name of Grantee: | Meggitt Training Systems, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | OXWT Zigbee Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2410.0 - 2470.0 | 0.086 |
| Limited Modular Approval. Professional installation is required. Power output listed is conducted. This is an OEM transmitter module approved for use in products operating as a mobile or fixed transmitting device. Final antenna installation and operating configurations of this transmitter including antenna gain and minimum cable loss must not exceed the EIRP of the configuration used for MPE compliance. Operations is limited to 2410-2465MHz, set by programming restrictions, for certain antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide the separation distances, as described in this filing, and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions and installation requirements to satisfy RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Power listed is continuously variable from the value listed in this entry to 0.0095W |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |