FCC ID WJ9-ARU4ELCU6

UHF RFID Reader

by KATHREIN Sachsen GmbH

Grantee Code: WJ9   Product Code: ARU4ELCU6
Latest application date: 2015-10-15

Device Images

FCC ID Device Details

FCC IDWJ9-ARU4ELCU6
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeWJ9
Product CodeARU4ELCU6
Applicant BusinessKATHREIN Sachsen GmbH 🇩🇪
Related Domains kathrein-sachsen.de
Equipment ClassUHF RFID Reader
Test FirmCSA Group Bayern GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.25-927.25 MHzClass II permissive change or modification of presently authorized equipment2015-10-15
902.25-927.75 MHzOriginal Equipment2015-04-24

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2015-10-15PDF 2.7 MB
User Manual AntennasUsers Manual2015-10-15PDF 3.2 MB
Antenna Installation ManualUsers Manual2015-04-24PDF 3.2 MB
Installation Manual part 1Users Manual2015-04-24PDF 2.9 MB
Installation Manual part 2Users Manual2015-04-24PDF 3.1 MB
Internal PhotosInternal Photos2016-04-12PDF 1.8 MB
Internal PhotosInternal Photos2015-10-21PDF 3.6 MB
External PhotosExternal Photos2015-10-15PDF 402.6 KB
External PhotosExternal Photos2015-04-24PDF 1.2 MB
LabelID Label/Location Info2015-10-15PDF 87.6 KB
Label LocationID Label/Location Info2015-04-24PDF 257.8 KB
Test PhotosTest Setup Photos2015-10-15PDF 1 MB
Test Setup PhotosTest Setup Photos2015-04-24PDF 1.1 MB
Test ReportTest Report2015-10-15PDF 2.5 MB
Test ReportTest Report2015-04-24PDF 2.9 MB
Agent AuthorizationCover Letter(s)2015-10-15PDF 66.9 KB
C2PC LetterCover Letter(s)2015-10-15PDF 67.6 KB
Confidentiality RequestCover Letter(s)2015-10-15PDF 243.5 KB
Agent AuthorizationCover Letter(s)2015-04-24PDF 797.6 KB
Request for ConfidentialityCover Letter(s)2015-04-24PDF 116.4 KB
RF ExposureRF Exposure Info2015-10-15PDF 117.8 KB
MPE CalculationRF Exposure Info2015-04-24PDF 121.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 44.3 KB
Schematics Metadata onlySchematicsPDF 936.1 KB
Configuration Description Metadata onlyOperational DescriptionPDF 590.4 KB
Description of changes 01 Metadata onlyOperational DescriptionPDF 102.7 KB
Description of changes 02 Metadata onlyOperational DescriptionPDF 575.2 KB
Operation Description Metadata onlyOperational DescriptionPDF 590.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 1.1 MB
Parts List Metadata onlyParts List/Tune Up InfoPDF 49.7 KB

Application Information

Application IDG5hHqUiGbhYFRbhTEuXShQ==
Final Action Date2015-10-15
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017985607
ModelARU4ELCU6
Frequency Range902.25-927.25 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionUHF RFID Reader
Responsible PartyJoerg Spranger, Engineer, j.spranger@kathrein-sachsen.de , +49-3722 6073
AgentCSA Bayern GmbH, thomas.ring@csagroup.org
Test FirmFrank Scharnowski, CSA Group Bayern GmbH, frank.scharnowski@csagroup.org , 49-9424-9481-140
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date04/12/2016
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. This device is granted for use in mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class 2 Permissive Change for hardware changes as shown in this filing.

Applications

Application IDDatePurpose
G5hHqUiGbhYFRbhTEuXShQ==2015-10-15Class II permissive change or modification of presently authorized equipment
JdZXPDrTV1vVU1dVbucFaw==2015-04-24Original Equipment

Equipment Authorization

FrequencyOutputRules
902.25-927.25 MHz0.721000015C
902.25-927.75 MHz0.721000015C

Grants

TCB Grant - Application JdZXPDrTV1vVU1dVbucFaw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/24/2015

Application Dated: 04/23/2015
KATHREIN Sachsen GmbH
Lindenstrasse 3
Muehlau, 09241
Germany
 
Attention: Joerg Spranger , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WJ9-ARU4ELCU6
Name of Grantee:  KATHREIN Sachsen GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: UHF RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.721  

Power output listed is conducted. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application JdZXPDrTV1vVU1dVbucFaw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

KATHREIN Sachsen GmbH
Lindenstrasse 3
Muehlau, 09241
Germany
  Date of Grant: 04/24/2015

Application Dated: 04/23/2015
 
Attention: Joerg Spranger , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WJ9-ARU4ELCU6
Name of Grantee:  KATHREIN Sachsen GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: UHF RFID Reader
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.75 0.721  

Power output listed is conducted. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application G5hHqUiGbhYFRbhTEuXShQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/15/2015

Application Dated: 10/15/2015
KATHREIN Sachsen GmbH
Lindenstrasse 3
Muehlau, 09241
Germany
 
Attention: Joerg Spranger , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WJ9-ARU4ELCU6
Name of Grantee:  KATHREIN Sachsen GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: UHF RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.25 0.721  

Power output listed is conducted.

This device is granted for use in mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class 2 Permissive Change for hardware changes as shown in this filing.


EAS Grant - Application G5hHqUiGbhYFRbhTEuXShQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

KATHREIN Sachsen GmbH
Lindenstrasse 3
Muehlau, 09241
Germany
  Date of Grant: 10/15/2015

Application Dated: 10/15/2015
 
Attention: Joerg Spranger , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WJ9-ARU4ELCU6
Name of Grantee:  KATHREIN Sachsen GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: UHF RFID Reader
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.25  -  927.25 0.721  

Power output listed is conducted.

This device is granted for use in mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class 2 Permissive Change for hardware changes as shown in this filing.



Mail To: