FCC ID WJ9-WL1837MOD
WLAN and BT Module
by KATHREIN Sachsen GmbH
Grantee Code: WJ9 Product Code: WL1837MOD
Latest application date: 2019-05-23
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-05-23 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-05-23 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-05-23 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 | 2018-06-07 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 | 2018-06-07 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 | 2018-06-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2018-06-07 | PDF 680.4 KB |
| Label | ID Label/Location Info | 2018-06-07 | PDF 58.1 KB |
| Test Set Up | Test Setup Photos | 2019-05-23 | PDF 359.4 KB |
| Test Report | Test Report | 2019-05-23 | PDF 493.9 KB |
| Test Report 1 | Test Report | 2019-05-23 | PDF 578.9 KB |
| Test Report 2 Metadata only | Test Report | 2019-05-23 | PDF 493.9 KB |
| Authorisation Letter | Cover Letter(s) | 2019-05-23 | PDF 325.6 KB |
| Confidentiality Request | Cover Letter(s) | 2019-05-23 | PDF 346.7 KB |
| Permissive Change Request | Cover Letter(s) | 2019-05-23 | PDF 370.4 KB |
| Authorisation Request | Cover Letter(s) | 2018-06-07 | PDF 205.4 KB |
| Autorization Request | Cover Letter(s) | 2018-06-07 | PDF 205.4 KB |
| New Grantee Cover Letter | Cover Letter(s) | 2018-06-07 | PDF 243 KB |
| New Grantee Letter | Cover Letter(s) | 2018-06-07 | PDF 243 KB |
| Original Grantee Letter | Cover Letter(s) | 2018-06-07 | PDF 42.6 KB |
| MPE Calculation | RF Exposure Info | 2019-05-23 | PDF 1.1 MB |
| Tune Up Info Metadata only | Parts List/Tune Up Info | PDF 306 KB |
Application Information
| Application ID | wvT7cVtaI+uGHegRHtjGwQ== |
|---|---|
| Final Action Date | 2019-05-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017985607 |
| Model | WL1837MOD |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | WLAN and BT Module |
| Responsible Party | Joerg Spranger, Engineer, j.spranger@kathrein-sachsen.de  , +49-3722 6073 |
| Technical Contact | Joerg Spranger, KATHREIN Sachsen GmbH, j.spranger@kathrein-sachsen.de , 49 3722 60373 |
| Non-Technical Contact | Daniel Schkalda, KATHREIN Sachsen GmbH, d.schkalda@kathrein-sachsen.de , 49 3722 60373 |
| Test Firm | Darren Rust, UL VS Ltd, darren.rust@ul.com  , +44 1256 31 2119 |
| TCB Email | certification@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class 2 Permissive Change to the module for mobile usage in a specific host product in accordance with this filing. RF exposure compliance is limited to the specific operating configurations tested for this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| wvT7cVtaI+uGHegRHtjGwQ== | 2019-05-23 | Class II permissive change or modification of presently authorized equipment |
| VZyPtvPKFYuYilDlt/1vNA== | 2019-05-23 | Class II permissive change or modification of presently authorized equipment |
| J3OZRInX6Mdavr5LcvgQxA== | 2019-05-23 | Class II permissive change or modification of presently authorized equipment |
| zDDZBXCtCVhmq5jBtsY3mw== | 2018-06-07 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 |
| WH/xE6E+6RIKlbqi/89ETw== | 2018-06-07 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 |
| D8HCdoN/UNgnrQrdNSf3sA== | 2018-06-07 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0146000 | 15C | CC |
| 2402-2480 MHz | 0.0049 | 15C | CC |
| 2412-2472 MHz | 0.2432 | 15C | CC, MO |
| 5180-5240 MHz | 0.0382 | 15E | CC |
| 5180-5240 MHz | 0.0382 | 15E | 38, CC |
| 5190-5230 MHz | 0.0499 | 15E | CC |
| 5190-5230 MHz | 0.0499 | 15E | 38, CC |
| 5260-5320 MHz | 0.0244 | 15E | CC, MO |
| 5260-5320 MHz | 0.0244 | 15E | 38, CC, MO |
| 5270-5310 MHz | 0.0525 | 15E | CC, MO |
| 5270-5310 MHz | 0.0525 | 15E | 38, CC, MO |
| 5500-5700 MHz | 0.0698 | 15E | CC, MO |
| 5500-5700 MHz | 0.0698 | 15E | 38, CC, MO |
| 5745-5825 MHz | 0.0614 | 15E | CC |
| 5745-5825 MHz | 0.0614 | 15E | 38, CC |
Grants
TCB Grant - Application zDDZBXCtCVhmq5jBtsY3mw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1 - 3 Horizon Kingsland Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 06/07/2018 Application Dated: 06/07/2018 |
| KATHREIN Sachsen GmbH |
| Lindenstrasse 3 |
| Muehlau, 09241 Germany |
| Attention: Joerg Spranger , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WJ9-WL1837MOD |
| Name of Grantee: | KATHREIN Sachsen GmbH |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| 38 CC MO | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.0698 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0614 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application zDDZBXCtCVhmq5jBtsY3mw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
KATHREIN Sachsen GmbH Lindenstrasse 3 Muehlau, 09241 Germany |
Date of Grant: 06/07/2018 Application Dated: 06/07/2018 |
| Attention: Joerg Spranger , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WJ9-WL1837MOD |
| Name of Grantee: | KATHREIN Sachsen GmbH |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| 38 CC MO | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.0698 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0614 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1 - 3 Horizon Kingsland Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 05/23/2019 Application Dated: 05/22/2019 |
| KATHREIN Sachsen GmbH |
| Lindenstrasse 3 |
| Muehlau, 09241 Germany |
| Attention: Joerg Spranger , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WJ9-WL1837MOD |
| Name of Grantee: | KATHREIN Sachsen GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class 2 Permissive Change to the module for mobile usage in a specific host product in accordance with this filing. RF exposure compliance is limited to the specific operating configurations tested for this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application wvT7cVtaI+uGHegRHtjGwQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
KATHREIN Sachsen GmbH Lindenstrasse 3 Muehlau, 09241 Germany |
Date of Grant: 05/23/2019 Application Dated: 05/22/2019 |
| Attention: Joerg Spranger , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WJ9-WL1837MOD |
| Name of Grantee: | KATHREIN Sachsen GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class 2 Permissive Change to the module for mobile usage in a specific host product in accordance with this filing. RF exposure compliance is limited to the specific operating configurations tested for this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1 - 3 Horizon Kingsland Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 06/07/2018 Application Dated: 06/07/2018 |
| KATHREIN Sachsen GmbH |
| Lindenstrasse 3 |
| Muehlau, 09241 Germany |
| Attention: Joerg Spranger , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WJ9-WL1837MOD |
| Name of Grantee: | KATHREIN Sachsen GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application WH/xE6E+6RIKlbqi/89ETw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
KATHREIN Sachsen GmbH Lindenstrasse 3 Muehlau, 09241 Germany |
Date of Grant: 06/07/2018 Application Dated: 06/07/2018 |
| Attention: Joerg Spranger , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WJ9-WL1837MOD |
| Name of Grantee: | KATHREIN Sachsen GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1 - 3 Horizon Kingsland Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 05/23/2019 Application Dated: 05/22/2019 |
| KATHREIN Sachsen GmbH |
| Lindenstrasse 3 |
| Muehlau, 09241 Germany |
| Attention: Joerg Spranger , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WJ9-WL1837MOD |
| Name of Grantee: | KATHREIN Sachsen GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class 2 Permissive Change to the module for mobile usage in a specific host product in accordance with this filing. RF exposure compliance is limited to the specific operating configurations tested for this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application VZyPtvPKFYuYilDlt/1vNA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
KATHREIN Sachsen GmbH Lindenstrasse 3 Muehlau, 09241 Germany |
Date of Grant: 05/23/2019 Application Dated: 05/22/2019 |
| Attention: Joerg Spranger , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WJ9-WL1837MOD |
| Name of Grantee: | KATHREIN Sachsen GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class 2 Permissive Change to the module for mobile usage in a specific host product in accordance with this filing. RF exposure compliance is limited to the specific operating configurations tested for this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1 - 3 Horizon Kingsland Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 05/23/2019 Application Dated: 05/22/2019 |
| KATHREIN Sachsen GmbH |
| Lindenstrasse 3 |
| Muehlau, 09241 Germany |
| Attention: Joerg Spranger , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WJ9-WL1837MOD |
| Name of Grantee: | KATHREIN Sachsen GmbH |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.0698 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class 2 Permissive Change to the module for mobile usage in a specific host product in accordance with this filing. RF exposure compliance is limited to the specific operating configurations tested for this filing |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application J3OZRInX6Mdavr5LcvgQxA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
KATHREIN Sachsen GmbH Lindenstrasse 3 Muehlau, 09241 Germany |
Date of Grant: 05/23/2019 Application Dated: 05/22/2019 |
| Attention: Joerg Spranger , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WJ9-WL1837MOD |
| Name of Grantee: | KATHREIN Sachsen GmbH |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.0698 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class 2 Permissive Change to the module for mobile usage in a specific host product in accordance with this filing. RF exposure compliance is limited to the specific operating configurations tested for this filing |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL International (UK) Ltd Unit 1 - 3 Horizon Kingsland Business Park Wade Road Basingstoke, RG24 8AH United Kingdom |
Date of Grant: 06/07/2018 Application Dated: 06/07/2018 |
| KATHREIN Sachsen GmbH |
| Lindenstrasse 3 |
| Muehlau, 09241 Germany |
| Attention: Joerg Spranger , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WJ9-WL1837MOD |
| Name of Grantee: | KATHREIN Sachsen GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application D8HCdoN/UNgnrQrdNSf3sA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
KATHREIN Sachsen GmbH Lindenstrasse 3 Muehlau, 09241 Germany |
Date of Grant: 06/07/2018 Application Dated: 06/07/2018 |
| Attention: Joerg Spranger , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WJ9-WL1837MOD |
| Name of Grantee: | KATHREIN Sachsen GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN and BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |