FCC ID WL6-TC6BC30CA1

Wireless Motherboard

by ELITEGROUP COMPUTER SYSTEMS CO., LTD

Grantee Code: WL6   Product Code: TC6BC30CA1
Latest application date: 2014-08-20

FCC ID Device Details

FCC IDWL6-TC6BC30CA1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeWL6
Product CodeTC6BC30CA1
Applicant BusinessELITEGROUP COMPUTER SYSTEMS CO., LTD 🇹🇼
Related Domains ecs.com.tw atl-lab.com.tw
Equipment ClassWireless Motherboard
Test FirmA Test Lab Techno Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2014-08-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2014-08-20
2402-2480 MHzOriginal Equipment2014-08-07
2412-2462 MHzOriginal Equipment2014-08-07

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2014-08-20PDF 358.5 KB
User manualUsers Manual2014-08-07PDF 120.4 KB
Internal PhotosInternal Photos2014-08-20PDF 80 KB
Internal photoInternal Photos2014-08-07PDF 470.1 KB
External PhotosExternal Photos2014-08-20PDF 385.4 KB
External photoExternal Photos2014-08-07PDF 202.4 KB
Label info & Label LocationID Label/Location Info2014-08-20PDF 100 KB
ID label/Location infoID Label/Location Info2014-08-07PDF 91.3 KB
SAR Test Setup PhotographsTest Setup Photos2014-08-20PDF 224.3 KB
Test setup photoTest Setup Photos2014-08-07PDF 380.5 KB
Test setup photoTest Setup Photos2014-08-07PDF 380.5 KB
Test report_BTTest Report2014-08-07PDF 1.3 MB
Test report_WLANTest Report2014-08-07PDF 1.6 MB
Class II permissive change letterCover Letter(s)2014-08-20PDF 34.4 KB
Declaration of authorizationCover Letter(s)2014-08-20PDF 34 KB
Host Different Description letterCover Letter(s)2014-08-20PDF 42.7 KB
Declaration of ConformityCover Letter(s)2014-08-07PDF 42.1 KB
Declaration of ConformityCover Letter(s)2014-08-07PDF 121.5 KB
Declaration of Conformity (FCC subpart 15B) Metadata onlyCover Letter(s)2014-08-07PDF 43.3 KB
Declaration of authorizationCover Letter(s)2014-08-07PDF 32.2 KB
FCC Modular Approval Request Metadata onlyCover Letter(s)2014-08-07PDF 629.5 KB
Modular Approval RequestCover Letter(s)2014-08-07PDF 61.3 KB
confidentialityCover Letter(s)2014-08-07PDF 368.1 KB
SAR reportRF Exposure Info2014-08-20PDF 1.7 MB
MPERF Exposure Info2014-08-07PDF 107.5 KB
Block diagram Metadata onlyBlock DiagramPDF 53.2 KB
Schematics Metadata onlySchematicsPDF 53.3 KB
Operational description Metadata onlyOperational DescriptionPDF 65.1 KB

Application Information

Application IDLw95lfEnhCuO8vde4Ddeeg==
Final Action Date2014-08-20
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0018032326
ModelTC6BC30CA1
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless Motherboard
Responsible PartySunny Kuo, Section Manager, sunny.kuo@ecs.com.tw , 886-2-2162-1177
Technical ContactMurphy Wang, A Test Lab Techno Corp., murphy@atl-lab.com.tw , 886-3-2710188
Non-Technical ContactRiva Chen, A Test Lab Techno Corp., riva.chen@atl-lab.com.tw , 886-3-2710188
Test FirmFly LU, A Test Lab Techno Corp., fly@atl-lab.com.tw , 886-3-2710188
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes. Class II Change : This Class II Change adds a portable platform. This platform is tablet PC, TC69CAx( x is 0~9, A~Z, '-' or blank), from ECS ELITEGROUP. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body and simultaneous transmission use conditions are 0.99 and 1.21 W/kg, respectively.

Applications

Application IDDatePurpose
Lw95lfEnhCuO8vde4Ddeeg==2014-08-20Class II permissive change or modification of presently authorized equipment
0Lg9TLr23lmgovJKDb8q8g==2014-08-20Class II permissive change or modification of presently authorized equipment
sjS6Swxk+mkHY3rGlD7Pzw==2014-08-07Original Equipment
jE3Uh9kzTWfeQnyutIxiFg==2014-08-07Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.003900015CCC
2412-2462 MHz0.260000015CCC

Grants

TCB Grant - Application sjS6Swxk+mkHY3rGlD7Pzw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/07/2014

Application Dated: 08/06/2014
ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TC6BC30CA1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0039  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application sjS6Swxk+mkHY3rGlD7Pzw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
  Date of Grant: 08/07/2014

Application Dated: 08/06/2014
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TC6BC30CA1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0039  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Lw95lfEnhCuO8vde4Ddeeg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/20/2014

Application Dated: 08/18/2014
ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TC6BC30CA1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Digital Transmission System
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.26  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes.

Class II Change : This Class II Change adds a portable platform. This platform is tablet PC, TC69CAx( x is 0~9, A~Z, '-' or blank), from ECS ELITEGROUP. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body and simultaneous transmission use conditions are 0.99 and 1.21 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Lw95lfEnhCuO8vde4Ddeeg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
  Date of Grant: 08/20/2014

Application Dated: 08/18/2014
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TC6BC30CA1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Digital Transmission System
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.26  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes.

Class II Change : This Class II Change adds a portable platform. This platform is tablet PC, TC69CAx( x is 0~9, A~Z, '-' or blank), from ECS ELITEGROUP. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body and simultaneous transmission use conditions are 0.99 and 1.21 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application jE3Uh9kzTWfeQnyutIxiFg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/07/2014

Application Dated: 08/06/2014
ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TC6BC30CA1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Digital Transmission System
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.26  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application jE3Uh9kzTWfeQnyutIxiFg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
  Date of Grant: 08/07/2014

Application Dated: 08/06/2014
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TC6BC30CA1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Digital Transmission System
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.26  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 0Lg9TLr23lmgovJKDb8q8g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/20/2014

Application Dated: 08/18/2014
ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TC6BC30CA1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0039  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Class II Change : This Class II Change adds a portable platform. This platform is tablet PC, TC69CAx( x is 0~9, A~Z, '-' or blank), from ECS ELITEGROUP. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for simultaneous transmission use condition is 1.21 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 0Lg9TLr23lmgovJKDb8q8g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
  Date of Grant: 08/20/2014

Application Dated: 08/18/2014
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TC6BC30CA1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0039  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Class II Change : This Class II Change adds a portable platform. This platform is tablet PC, TC69CAx( x is 0~9, A~Z, '-' or blank), from ECS ELITEGROUP. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for simultaneous transmission use condition is 1.21 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: