FCC ID WL6-TRBC41CD1

Wireless Motherboard

by ELITEGROUP COMPUTER SYSTEMS CO., LTD

Grantee Code: WL6   Product Code: TRBC41CD1
Latest application date: 2014-05-05

FCC ID Device Details

FCC IDWL6-TRBC41CD1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeWL6
Product CodeTRBC41CD1
Applicant BusinessELITEGROUP COMPUTER SYSTEMS CO., LTD 🇹🇼
Related Domains ecs.com.tw quietek.com
Equipment ClassWireless Motherboard
Test FirmDEKRA TESTING AND CERTIFICATION CO., LTD. LinKou

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2014-05-05
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2014-05-05
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2014-05-05
2412-2462 MHzOriginal Equipment2014-04-18
5180-5240 MHzOriginal Equipment2014-04-18
2402-2480 MHzOriginal Equipment2014-04-18

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2014-05-05PDF 522.9 KB
User manualUsers Manual2014-04-18PDF 366.9 KB
Internal photo_SARInternal Photos2014-05-05PDF 2.3 MB
Internal photoInternal Photos2014-04-18PDF 1 MB
External photo_SARExternal Photos2014-05-05PDF 171 KB
External photoExternal Photos2014-04-18PDF 144.8 KB
ID LabelID Label/Location Info2014-05-05PDF 19.8 KB
Label location infoID Label/Location Info2014-05-05PDF 59.6 KB
ID LabelID Label/Location Info2014-04-18PDF 19.6 KB
Label location infoID Label/Location Info2014-04-18PDF 79.7 KB
Test setup photo_SARTest Setup Photos2014-05-05PDF 452.6 KB
Test setup photoTest Setup Photos2014-04-18PDF 284.6 KB
Test report_SARRF Exposure Info2014-05-05PDF 2 MB
Test report-DFSTest Report2014-04-18PDF 450.2 KB
Test report-Part 15ETest Report2014-04-18PDF 5.1 MB
Test report_BTTest Report2014-04-18PDF 1.6 MB
Test report_Part 15CTest Report2014-04-18PDF 3.6 MB
ATTESTATIONCover Letter(s)2014-04-18PDF 37.8 KB
ConfidentialityCover Letter(s)2014-05-05PDF 40.1 KB
Declaration of authorizationCover Letter(s)2014-05-05PDF 39.1 KB
FCC Declaration of Class II ChangeCover Letter(s)2014-05-05PDF 156.2 KB
About WiFi Channels 12 & 13 Declaration letterCover Letter(s)2014-04-18PDF 32.9 KB
ConfidentialityCover Letter(s)2014-04-18PDF 57.8 KB
DTS-UNII Declaration letterCover Letter(s)2014-04-18PDF 66.4 KB
DoC LetterCover Letter(s)2014-04-18PDF 46.9 KB
FCC Modular Approval RequestCover Letter(s)2014-04-18PDF 73.7 KB
RF ExposureRF Exposure Info2014-04-18PDF 93.7 KB
Block diagram Metadata onlyBlock DiagramPDF 715.2 KB
Schematics Metadata onlySchematicsPDF 1.1 MB
Operational description_BT Metadata onlyOperational DescriptionPDF 32 KB
Operational description_Part 15C Metadata onlyOperational DescriptionPDF 32 KB
Operational description_Part 15E Metadata onlyOperational DescriptionPDF 32.1 KB

Application Information

Application IDu3T2bihn8uEEwtIsQUF9Nw==
Final Action Date2014-05-05
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0018032326
ModelTRBC41CD1
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless Motherboard
Responsible PartySunny Kuo, Section Manager, sunny.kuo@ecs.com.tw , 886-2-2162-1177
AgentGene Gene Gene, QuieTek Corporation, gene@quietek.com , 886-2-8792-6808
Technical ContactMaggie Chen, QuieTek Corporation, maggiechen@quietek.com , 886-2-8601-3788
Non-Technical ContactMaggie Chen, QuieTek Corporation, maggiechen@quietek.com , 886-2-8601-3788
Test FirmMirenda Liao, DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou, mirenda.liao@dekra.com , +886-2-2602-7968
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. This Class II Change incorporates this Module into a Apmplify Tablet Model number: TR10Cxy (x=A~Z, y=0,1,2,4~9) as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for this Permissive Change filing is: 1.38 W/kg(body).

Applications

Application IDDatePurpose
u3T2bihn8uEEwtIsQUF9Nw==2014-05-05Class II permissive change or modification of presently authorized equipment
LBpok+CMr8jZi6QeM1Mqjw==2014-05-05Class II permissive change or modification of presently authorized equipment
5g99XBUbQqq6nHeHyqo3cQ==2014-05-05Class II permissive change or modification of presently authorized equipment
o/1rG8ynGF+ABfZK8SfrxQ==2014-04-18Original Equipment
blZEhxVH3SkR+DZgXAj87g==2014-04-18Original Equipment
OiXAjwciWJ930QBIw5zyFQ==2014-04-18Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.005000015CCC
2412-2462 MHz0.3915CCC, MO
5180-5240 MHz0.03915ECC
5260-5320 MHz0.03915ECC, ND
5500-5700 MHz0.03915ECC, ND
5745-5825 MHz0.22615CCC, MO

Grants

TCB Grant - Application u3T2bihn8uEEwtIsQUF9Nw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 05/05/2014

Application Dated: 04/28/2014
ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TRBC41CD1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Digital Transmission System
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.39  
CC MO 15C 5745.0  -  5825.0 0.226  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.

This Class II Change incorporates this Module into a Apmplify Tablet Model number: TR10Cxy (x=A~Z, y=0,1,2,4~9) as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for this Permissive Change filing is: 1.38 W/kg(body).


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application u3T2bihn8uEEwtIsQUF9Nw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
  Date of Grant: 05/05/2014

Application Dated: 04/28/2014
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TRBC41CD1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Digital Transmission System
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.39  
CC MO 15C 5745.0  -  5825.0 0.226  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.

This Class II Change incorporates this Module into a Apmplify Tablet Model number: TR10Cxy (x=A~Z, y=0,1,2,4~9) as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for this Permissive Change filing is: 1.38 W/kg(body).


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application OiXAjwciWJ930QBIw5zyFQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/18/2014

Application Dated: 04/16/2014
ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TRBC41CD1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application OiXAjwciWJ930QBIw5zyFQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
  Date of Grant: 04/18/2014

Application Dated: 04/16/2014
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TRBC41CD1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application o/1rG8ynGF+ABfZK8SfrxQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/18/2014

Application Dated: 04/16/2014
ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TRBC41CD1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Digital Transmission System
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.39  
CC MO 15C 5745.0  -  5825.0 0.226  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application o/1rG8ynGF+ABfZK8SfrxQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
  Date of Grant: 04/18/2014

Application Dated: 04/16/2014
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TRBC41CD1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Digital Transmission System
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.39  
CC MO 15C 5745.0  -  5825.0 0.226  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application LBpok+CMr8jZi6QeM1Mqjw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 05/05/2014

Application Dated: 04/28/2014
ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TRBC41CD1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This Class II Change incorporates this Module into a Apmplify Tablet Model number: TR10Cxy (x=A~Z, y=0,1,2,4~9) as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application LBpok+CMr8jZi6QeM1Mqjw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
  Date of Grant: 05/05/2014

Application Dated: 04/28/2014
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TRBC41CD1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This Class II Change incorporates this Module into a Apmplify Tablet Model number: TR10Cxy (x=A~Z, y=0,1,2,4~9) as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application blZEhxVH3SkR+DZgXAj87g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/18/2014

Application Dated: 04/16/2014
ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TRBC41CD1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.039  
CC ND 15E 5260.0  -  5320.0 0.039  
CC ND 15E 5500.0  -  5700.0 0.039  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.

DFS operation is slave without radar detection.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application blZEhxVH3SkR+DZgXAj87g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
  Date of Grant: 04/18/2014

Application Dated: 04/16/2014
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TRBC41CD1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.039  
CC ND 15E 5260.0  -  5320.0 0.039  
CC ND 15E 5500.0  -  5700.0 0.039  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.

DFS operation is slave without radar detection.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 5g99XBUbQqq6nHeHyqo3cQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 05/05/2014

Application Dated: 04/28/2014
ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TRBC41CD1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.039  
CC ND 15E 5260.0  -  5320.0 0.039  
CC ND 15E 5500.0  -  5700.0 0.039  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.

DFS operation is slave without radar detection.

This Class II Change incorporates this Module into a Apmplify Tablet Model number: TR10Cxy (x=A~Z, y=0,1,2,4~9) as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for this Permissive Change filing is: 1.19 W/kg(body).


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 5g99XBUbQqq6nHeHyqo3cQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ELITEGROUP COMPUTER SYSTEMS CO., LTD
No.239,Sec.2,Ti Ding Blvd., Taipei, Taiwan
Taipei,
Taiwan
  Date of Grant: 05/05/2014

Application Dated: 04/28/2014
 
Attention: Sunny Kuo , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WL6-TRBC41CD1
Name of Grantee:  ELITEGROUP COMPUTER SYSTEMS CO., LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Motherboard
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.039  
CC ND 15E 5260.0  -  5320.0 0.039  
CC ND 15E 5500.0  -  5700.0 0.039  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.

DFS operation is slave without radar detection.

This Class II Change incorporates this Module into a Apmplify Tablet Model number: TR10Cxy (x=A~Z, y=0,1,2,4~9) as described in this filing. Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for this Permissive Change filing is: 1.19 W/kg(body).


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: