FCC ID WP3PGMODEMLP
Power-G Modem LP Module
by Visonic Ltd.
Grantee Code: WP3 Product Code: PGMODEMLP
Latest application date: 2020-07-01
FCC ID Device Details
| FCC ID | WP3PGMODEMLP |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | WP3 |
| Product Code | PGMODEMLP |
| Applicant Business | Visonic Ltd. 🇮🇱 |
| Related Domains |  tycoint.com  jci.com |
| Equipment Class | Power-G Modem LP Module |
| Test Firm | Hermon Laboratories Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 912.75-919.106 MHz | Class II permissive change or modification of presently authorized equipment | 2020-07-01 |
| 912.75-919.106 MHz | Original Equipment | 2018-08-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2018-08-16 | PDF 257.6 KB |
| Internal Photos | Internal Photos | 2020-12-28 | PDF 193.3 KB |
| Internal Photos | Internal Photos | 2019-02-11 | PDF 257.2 KB |
| External Photos | External Photos | 2018-08-16 | PDF 191 KB |
| ID Label/Location Info | ID Label/Location Info | 2018-08-16 | PDF 108.2 KB |
| Test Setup Photos | Test Setup Photos | 2020-07-01 | PDF 243 KB |
| Test Setup Photos | Test Setup Photos | 2018-08-16 | PDF 356.2 KB |
| Test Report | Test Report | 2020-07-01 | PDF 1.4 MB |
| Test Report | Test Report | 2018-08-16 | PDF 1.8 MB |
| Class II PC_cover_letter | Cover Letter(s) | 2020-07-01 | PDF 73.8 KB |
| Declaration_of_authorization | Cover Letter(s) | 2020-07-01 | PDF 397.6 KB |
| Request_for_confidentiality | Cover Letter(s) | 2020-07-01 | PDF 120.8 KB |
| Declaration_of_authorization | Cover Letter(s) | 2018-08-16 | PDF 232.4 KB |
| Modular Approval Request_letter | Cover Letter(s) | 2018-08-16 | PDF 205.5 KB |
| confidentiality | Cover Letter(s) | 2018-08-16 | PDF 77.5 KB |
| RF Exposure Info | RF Exposure Info | 2020-07-01 | PDF 123 KB |
| MPE | RF Exposure Info | 2018-08-16 | PDF 77.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 84.9 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 97.2 KB | |
| Schematics Metadata only | Schematics | PDF 191.6 KB | |
| Schematics Metadata only | Schematics | PDF 277 KB | |
| Operational Description Metadata only | Operational Description | PDF 482.2 KB | |
| Operational Description Metadata only | Operational Description | PDF 251.5 KB |
Application Information
| Application ID | 3Lbgq48wgbMuxGsqcBuplw== |
|---|---|
| Final Action Date | 2020-07-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018112599 |
| Model | PGMODEMLP |
| Frequency Range | 912.75-919.106 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Power-G Modem LP Module |
| Responsible Party | Zuri Rubin, Certification Manager, zurir@tycoint.com , +97236456832 |
| Technical Contact | Michael Nikishin, Hermon Laboratories Ltd., nikishin@hermonlabs.com  , 972 4626 8440 |
| Non-Technical Contact | Zuri Rubin, Visonic Ltd., zuri.rubin@jci.com , 972 3645 6832 |
| Test Firm | George Shleimovich, Hermon Laboratories Ltd., George@HERMONLABS.com , 97246268468 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/28/2020 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC: The following changes were implemented in approved Power-G Modem LP Module FCC ID: WP3PGMODEMLP .: 1. Removed microcontroller IC, and peripheral components 2. Modified the PCB due to the remove of the microcontroller IC Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 3Lbgq48wgbMuxGsqcBuplw== | 2020-07-01 | Class II permissive change or modification of presently authorized equipment |
| ftIgW3nlvmWI6RqFAYnqhw== | 2018-08-16 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ftIgW3nlvmWI6RqFAYnqhw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 08/16/2018 Application Dated: 08/14/2018 |
| Visonic Ltd. |
| 24 Habarzel street |
| Tel Aviv, 61920 Israel |
| Attention: Zuri Rubin , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WP3PGMODEMLP |
| Name of Grantee: | Visonic Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Power-G Modem LP Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 912.75 - 919.106 | 0.022 |
| Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application ftIgW3nlvmWI6RqFAYnqhw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Visonic Ltd. 24 Habarzel street Tel Aviv, 61920 Israel |
Date of Grant: 08/16/2018 Application Dated: 08/14/2018 |
| Attention: Zuri Rubin , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WP3PGMODEMLP |
| Name of Grantee: | Visonic Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Power-G Modem LP Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 912.75 - 919.106 | 0.022 |
| Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 07/01/2020 Application Dated: 06/30/2020 |
| Visonic Ltd. |
| 24 Habarzel street |
| Tel Aviv, 61920 Israel |
| Attention: Zuri Rubin , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WP3PGMODEMLP |
| Name of Grantee: | Visonic Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Power-G Modem LP Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 912.75 - 919.106 | 0.017 |
| C2PC: The following changes were implemented in approved Power-G Modem LP Module FCC ID: WP3PGMODEMLP .: 1. Removed microcontroller IC, and peripheral components 2. Modified the PCB due to the remove of the microcontroller IC Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 3Lbgq48wgbMuxGsqcBuplw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Visonic Ltd. 24 Habarzel street Tel Aviv, 61920 Israel |
Date of Grant: 07/01/2020 Application Dated: 06/30/2020 |
| Attention: Zuri Rubin , Certification Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WP3PGMODEMLP |
| Name of Grantee: | Visonic Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Power-G Modem LP Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 912.75 - 919.106 | 0.017 |
| C2PC: The following changes were implemented in approved Power-G Modem LP Module FCC ID: WP3PGMODEMLP .: 1. Removed microcontroller IC, and peripheral components 2. Modified the PCB due to the remove of the microcontroller IC Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |