FCC ID WQ8IA800-CAM

Maxisys Intelligent ADAS IA800 Camera & AdaptorKit

by Autel Intelligent Tech. Corp., Ltd.

Grantee Code: WQ8   Product Code: IA800CAM
Latest application date: 2020-11-18

FCC ID Device Details

FCC IDWQ8IA800-CAM
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeWQ8
Product CodeIA800CAM
Applicant BusinessAutel Intelligent Tech. Corp., Ltd. 🇨🇳
Related Domains autel.com
Equipment ClassMaxisys Intelligent ADAS IA800 Camera & AdaptorKit
Test FirmShenzhen Anbotek Compliance Laboratory Limited

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2020-11-18
2412-2462 MHzOriginal Equipment2020-11-18

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2021-05-17PDF 1.3 MB
Int photoInternal Photos2021-05-17PDF 4.6 MB
Ext photoExternal Photos2021-05-17PDF 1.5 MB
labelID Label/Location Info2020-11-18PDF 94.4 KB
Test photoTest Setup Photos2021-05-17PDF 824.5 KB
test photoTest Setup Photos2021-05-17PDF 824.5 KB
test reportTest Report2020-11-18PDF 4.5 MB
test reportTest Report2020-11-18PDF 2.8 MB
Authorization letterCover Letter(s)2020-11-18PDF 62.3 KB
FCC Confidentiality RequestCover Letter(s)2020-11-18PDF 64.2 KB
FCC Software Configuration Control DeclarationCover Letter(s)2020-11-18PDF 90.2 KB
FCC_Short_Long_Term_Confidentiality_RequestCover Letter(s)2020-11-18PDF 64.2 KB
RF ExposureRF Exposure Info2020-11-18PDF 176.3 KB
Block Metadata onlyBlock DiagramPDF 390.7 KB
SCH Metadata onlySchematicsPDF 1.1 MB
OP Metadata onlyOperational DescriptionPDF 93.3 KB
FCC SW SECURITY DESCRIPTION Metadata onlySDR Software/Security InfPDF 135.2 KB

Application Information

Application IDsCfKtz+wv/WhJCZy87oYrQ==
Final Action Date2020-11-18
Application PurposeOriginal Equipment
Applicant FRN0018132787
ModelIA800-CAM
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionMaxisys Intelligent ADAS IA800 Camera & AdaptorKit
Responsible PartyFrank Li, President, sales@autel.com , (86)755-86147779
Technical ContactAutel Intelligent Tech. Corp., Ltd., sales@autel.com
Test FirmJeff Zhu, Shenzhen Anbotek Compliance Laboratory Limited, jeff.zhu@anbotek.com , 86-755-26064492
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/17/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
sCfKtz+wv/WhJCZy87oYrQ==2020-11-18Original Equipment
MVOokDEkNFSixiQgBOnRwg==2020-11-18Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.065800015CCC, MO
5180-5240 MHz0.079315E38, CC, MO
5745-5825 MHz0.05415E38, CC, MO

Grants

TCB Grant - Application sCfKtz+wv/WhJCZy87oYrQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/18/2020

Application Dated: 11/18/2020
Autel Intelligent Tech. Corp., Ltd.
7th-8th, 10th Floor, Bldg. B1, Zhiyuan,
Xueyuan Rd. Xili, Nanshan,
Shenzhen, 518055
China
 
Attention: Frank Li , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WQ8IA800-CAM
Name of Grantee:  Autel Intelligent Tech. Corp., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Maxisys Intelligent ADAS IA800 Camera & AdaptorKit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.0793  
38 CC MO 15E 5745.0  -  5825.0 0.054  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application sCfKtz+wv/WhJCZy87oYrQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Autel Intelligent Tech. Corp., Ltd.
7th-8th, 10th Floor, Bldg. B1, Zhiyuan, Xueyuan Rd. Xili, Nanshan,
Shenzhen, 518055
China
  Date of Grant: 11/18/2020

Application Dated: 11/18/2020
 
Attention: Frank Li , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WQ8IA800-CAM
Name of Grantee:  Autel Intelligent Tech. Corp., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Maxisys Intelligent ADAS IA800 Camera & AdaptorKit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.0793  
38 CC MO 15E 5745.0  -  5825.0 0.054  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application MVOokDEkNFSixiQgBOnRwg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/18/2020

Application Dated: 11/18/2020
Autel Intelligent Tech. Corp., Ltd.
7th-8th, 10th Floor, Bldg. B1, Zhiyuan,
Xueyuan Rd. Xili, Nanshan,
Shenzhen, 518055
China
 
Attention: Frank Li , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WQ8IA800-CAM
Name of Grantee:  Autel Intelligent Tech. Corp., Ltd.
Equipment Class: Digital Transmission System
Notes: Maxisys Intelligent ADAS IA800 Camera & AdaptorKit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.0658  

Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application MVOokDEkNFSixiQgBOnRwg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Autel Intelligent Tech. Corp., Ltd.
7th-8th, 10th Floor, Bldg. B1, Zhiyuan, Xueyuan Rd. Xili, Nanshan,
Shenzhen, 518055
China
  Date of Grant: 11/18/2020

Application Dated: 11/18/2020
 
Attention: Frank Li , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WQ8IA800-CAM
Name of Grantee:  Autel Intelligent Tech. Corp., Ltd.
Equipment Class: Digital Transmission System
Notes: Maxisys Intelligent ADAS IA800 Camera & AdaptorKit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.0658  

Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: