FCC ID WR4-CL55

Multiradio module

by Topcon Positioning Systems, Inc.

Grantee Code: WR4   Product Code: CL55
Latest application date: 2024-06-04

FCC ID Device Details

FCC IDWR4-CL55
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeWR4
Product CodeCL55
Applicant BusinessTopcon Positioning Systems, Inc. 🇺🇸
Related Domains topcon.com
Equipment ClassMultiradio module
Test FirmNemko S.p.A.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2024-06-04
2412-2472 MHzClass II permissive change or modification of presently authorized equipment2024-06-04
13.56 MHzChange in identification of presently authorized equipment. Original FCC ID: 2ASVE-CL55 Grant Date: 05/01/20192024-01-11
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: 2ASVE-CL55 Grant Date: 05/01/20192024-01-11
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: 2ASVE-CL55 Grant Date: 05/01/20192024-01-11

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2024-06-04PDF 1.8 MB
Internal PhotosInternal Photos2024-06-04PDF 1.6 MB
External PhotosExternal Photos2024-06-04PDF 397.9 KB
External PhotosExternal Photos2024-06-04PDF 417.2 KB
External PhotosExternal Photos2024-01-11PDF 179.2 KB
Label LocationID Label/Location Info2024-06-04PDF 139.5 KB
Label and Label LocationID Label/Location Info2024-06-04PDF 394.5 KB
LabelsID Label/Location Info2024-06-04PDF 394.5 KB
Label and Label LocationID Label/Location Info2024-01-11PDF 74.2 KB
Test setup photosTest Setup Photos2024-06-04PDF 398.9 KB
Antenna DetailsTest Report2024-06-04PDF 3.4 MB
Antenna detailsTest Report2024-06-04PDF 756.6 KB
Test ReportTest Report2024-06-04PDF 3.5 MB
Test ReportTest Report2024-06-04PDF 4 MB
Attestation StatementAttestation Statements2024-06-04PDF 226.8 KB
Attestation statementAttestation Statements2024-06-04PDF 200.3 KB
Attestation statementAttestation Statements2024-01-11PDF 226.8 KB
Cover LettersCover Letter(s)2024-06-04PDF 242.5 KB
Cover LettersCover Letter(s)2024-01-11PDF 180.9 KB
RF Exposure infoRF Exposure Info2024-06-04PDF 88.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 247 KB
Schematics Metadata onlySchematicsPDF 989.7 KB
Operational Description Metadata onlyOperational DescriptionPDF 546.8 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 226.5 KB

Application Information

Application IDmtJdVHdsvcyU5lL3j6uE0A==
Final Action Date2024-06-04
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0008852949
ModelCL55
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionMultiradio module
Responsible PartyFerdinand Riodique, friodique@topcon.com , 925-245-8300
Test FirmRoberto Giampaglia, Nemko S.p.A., segreteria@nemko.com , +39 039 220 12 01
TCB Emailjin.xu@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change to integrate this module into host platforms, model CL-55 3G, CL-55 3G +RADIO, CL-55 3G SDF, CL-55 3G +RADIO SDF; CL-55 LTE VZW, CL-55 LTE VZW +RADIO, CL-55 LTE VZW SDF, CL-55 LTE VZW +RADIO SDF; CL-55 GLOBAL, CL-55 +RADIO GLOBAL, CL-55 GLOBAL SDF, CL-55 +RADIO GLOBAL SDF with 3G, LTE, UHF modules and antennas as described in this filing. Output power listed is conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance

Applications

Application IDDatePurpose
mtJdVHdsvcyU5lL3j6uE0A==2024-06-04Class II permissive change or modification of presently authorized equipment
m7bVnur0oYyv1gEjqr9JYw==2024-06-04Class II permissive change or modification of presently authorized equipment
zTh/PDTTXc8TFbIAUbBB3g==2024-01-11Change in identification of presently authorized equipment. Original FCC ID: 2ASVE-CL55 Grant Date: 05/01/2019
dh3B3A+CPPnxWMBCEMu/jA==2024-01-11Change in identification of presently authorized equipment. Original FCC ID: 2ASVE-CL55 Grant Date: 05/01/2019
ZiHIqqA4Xx7OPjg2hjXudg==2024-01-11Change in identification of presently authorized equipment. Original FCC ID: 2ASVE-CL55 Grant Date: 05/01/2019

Equipment Authorization

FrequencyOutputRules
13.56 MHz15C
2402-2480 MHz0.0087115C
2402-2480 MHz0.0017815C
2412-2472 MHz0.4897815C
5180-5240 MHz0.0436515E
5260-5320 MHz0.0501115E
5500-5700 MHz0.0288415E
5745-5825 MHz0.0208915E

Grants

TCB Grant - Application zTh/PDTTXc8TFbIAUbBB3g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 01/11/2024

Application Dated: 01/11/2024
Topcon Positioning Systems, Inc.
7400 National Drive
Livermore, CA 94551
 
Attention: Ferdinand Riodique

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WR4-CL55
Name of Grantee:  Topcon Positioning Systems, Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  


EAS Grant - Application zTh/PDTTXc8TFbIAUbBB3g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Topcon Positioning Systems, Inc.
7400 National Drive
Livermore, CA 94551
United States
  Date of Grant: 01/11/2024

Application Dated: 01/11/2024
 
Attention: Ferdinand Riodique

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WR4-CL55
Name of Grantee:  Topcon Positioning Systems, Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  



TCB Grant - Application ZiHIqqA4Xx7OPjg2hjXudg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 01/11/2024

Application Dated: 01/11/2024
Topcon Positioning Systems, Inc.
7400 National Drive
Livermore, CA 94551
 
Attention: Ferdinand Riodique

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WR4-CL55
Name of Grantee:  Topcon Positioning Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.04365  
15E 5260.0  -  5320.0 0.05011  
15E 5500.0  -  5700.0 0.02884  
15E 5745.0  -  5825.0 0.02089  

RF output power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains Bluetooth (BR+EDR), Bluetooth Low Energy (BLE) and NFC transmitters.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.


EAS Grant - Application ZiHIqqA4Xx7OPjg2hjXudg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Topcon Positioning Systems, Inc.
7400 National Drive
Livermore, CA 94551
United States
  Date of Grant: 01/11/2024

Application Dated: 01/11/2024
 
Attention: Ferdinand Riodique

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WR4-CL55
Name of Grantee:  Topcon Positioning Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.04365  
15E 5260.0  -  5320.0 0.05011  
15E 5500.0  -  5700.0 0.02884  
15E 5745.0  -  5825.0 0.02089  

RF output power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device also contains Bluetooth (BR+EDR), Bluetooth Low Energy (BLE) and NFC transmitters.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.



TCB Grant - Application mtJdVHdsvcyU5lL3j6uE0A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 06/04/2024

Application Dated: 05/30/2024
Topcon Positioning Systems, Inc.
7400 National Drive
Livermore, CA 94551
 
Attention: Ferdinand Riodique

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WR4-CL55
Name of Grantee:  Topcon Positioning Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.04365  
15E 5260.0  -  5320.0 0.05011  
15E 5500.0  -  5700.0 0.02884  
15E 5745.0  -  5825.0 0.02089  

Class II Permissive Change to integrate this module into host platforms, model CL-55 3G, CL-55 3G +RADIO, CL-55 3G SDF, CL-55 3G +RADIO SDF; CL-55 LTE VZW, CL-55 LTE VZW +RADIO, CL-55 LTE VZW SDF, CL-55 LTE VZW +RADIO SDF; CL-55 GLOBAL, CL-55 +RADIO GLOBAL, CL-55 GLOBAL SDF, CL-55 +RADIO GLOBAL SDF with 3G, LTE, UHF modules and antennas as described in this filing.

Output power listed is conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance


EAS Grant - Application mtJdVHdsvcyU5lL3j6uE0A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Topcon Positioning Systems, Inc.
7400 National Drive
Livermore, CA 94551
United States
  Date of Grant: 06/04/2024

Application Dated: 05/30/2024
 
Attention: Ferdinand Riodique

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WR4-CL55
Name of Grantee:  Topcon Positioning Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.04365  
15E 5260.0  -  5320.0 0.05011  
15E 5500.0  -  5700.0 0.02884  
15E 5745.0  -  5825.0 0.02089  

Class II Permissive Change to integrate this module into host platforms, model CL-55 3G, CL-55 3G +RADIO, CL-55 3G SDF, CL-55 3G +RADIO SDF; CL-55 LTE VZW, CL-55 LTE VZW +RADIO, CL-55 LTE VZW SDF, CL-55 LTE VZW +RADIO SDF; CL-55 GLOBAL, CL-55 +RADIO GLOBAL, CL-55 GLOBAL SDF, CL-55 +RADIO GLOBAL SDF with 3G, LTE, UHF modules and antennas as described in this filing.

Output power listed is conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance



TCB Grant - Application m7bVnur0oYyv1gEjqr9JYw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 06/04/2024

Application Dated: 05/30/2024
Topcon Positioning Systems, Inc.
7400 National Drive
Livermore, CA 94551
 
Attention: Ferdinand Riodique

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WR4-CL55
Name of Grantee:  Topcon Positioning Systems, Inc.
Equipment Class: Digital Transmission System
Notes: Multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.00871  
15C 2402.0  -  2480.0 0.00178  
15C 2412.0  -  2472.0 0.48978  

Class II Permissive Change to integrate this module into host platforms, model CL-55 3G, CL-55 3G +RADIO, CL-55 3G SDF, CL-55 3G +RADIO SDF; CL-55 LTE VZW, CL-55 LTE VZW +RADIO, CL-55 LTE VZW SDF, CL-55 LTE VZW +RADIO SDF; CL-55 GLOBAL, CL-55 +RADIO GLOBAL, CL-55 GLOBAL SDF, CL-55 +RADIO GLOBAL SDF with 3G, LTE, UHF modules and antennas as described in this filing.

Output power listed is conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


EAS Grant - Application m7bVnur0oYyv1gEjqr9JYw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Topcon Positioning Systems, Inc.
7400 National Drive
Livermore, CA 94551
United States
  Date of Grant: 06/04/2024

Application Dated: 05/30/2024
 
Attention: Ferdinand Riodique

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WR4-CL55
Name of Grantee:  Topcon Positioning Systems, Inc.
Equipment Class: Digital Transmission System
Notes: Multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.00871  
15C 2402.0  -  2480.0 0.00178  
15C 2412.0  -  2472.0 0.48978  

Class II Permissive Change to integrate this module into host platforms, model CL-55 3G, CL-55 3G +RADIO, CL-55 3G SDF, CL-55 3G +RADIO SDF; CL-55 LTE VZW, CL-55 LTE VZW +RADIO, CL-55 LTE VZW SDF, CL-55 LTE VZW +RADIO SDF; CL-55 GLOBAL, CL-55 +RADIO GLOBAL, CL-55 GLOBAL SDF, CL-55 +RADIO GLOBAL SDF with 3G, LTE, UHF modules and antennas as described in this filing.

Output power listed is conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application dh3B3A+CPPnxWMBCEMu/jA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 01/11/2024

Application Dated: 01/11/2024
Topcon Positioning Systems, Inc.
7400 National Drive
Livermore, CA 94551
 
Attention: Ferdinand Riodique

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WR4-CL55
Name of Grantee:  Topcon Positioning Systems, Inc.
Equipment Class: Digital Transmission System
Notes: Multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.00871  
15C 2402.0  -  2480.0 0.00178  
15C 2412.0  -  2472.0 0.48978  

RF output power is conducted. Modular Approval. The RF output power of the device at 2468 MHz (channel 12) and 2472 MHz (channel 13) is reduced for compliance reasons as described in the filing documents.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee.

This device has 20 MHz and 40 MHz bandwidth modes. This device also contains NFC and U- NII transmitters.


EAS Grant - Application dh3B3A+CPPnxWMBCEMu/jA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Topcon Positioning Systems, Inc.
7400 National Drive
Livermore, CA 94551
United States
  Date of Grant: 01/11/2024

Application Dated: 01/11/2024
 
Attention: Ferdinand Riodique

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WR4-CL55
Name of Grantee:  Topcon Positioning Systems, Inc.
Equipment Class: Digital Transmission System
Notes: Multiradio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.00871  
15C 2402.0  -  2480.0 0.00178  
15C 2412.0  -  2472.0 0.48978  

RF output power is conducted. Modular Approval. The RF output power of the device at 2468 MHz (channel 12) and 2472 MHz (channel 13) is reduced for compliance reasons as described in the filing documents.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

The Grantee is responsible for providing the documentation required for modular use. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The responsibility for the use of this module, in all configurations used or contemplated, remains with the Grantee.

This device has 20 MHz and 40 MHz bandwidth modes. This device also contains NFC and U- NII transmitters.



Mail To: