FCC ID WR4-TPSWT41
Bluetooth Module
by Topcon Positioning Systems, Inc.
Grantee Code: WR4 Product Code: TPSWT41
Latest application date: 2014-01-06
FCC ID Device Details
| FCC ID | WR4-TPSWT41 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | WR4 |
| Product Code | TPSWT41 |
| Applicant Business | Topcon Positioning Systems, Inc. 🇺🇸 |
| Related Domains |  topcon.com |
| Equipment Class | Bluetooth Module |
| Test Firm | National Technical Systems (NTS) |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2014-01-06 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: QOQWT41 Grant Date: 05/15/2013 | 2013-12-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2014-01-06 | PDF 3.2 MB |
| Ext Photo Front | External Photos | 2013-12-11 | PDF 171.3 KB |
| Ext Photo Rear | External Photos | 2013-12-11 | PDF 70.6 KB |
| Label | ID Label/Location Info | 2013-12-11 | PDF 171.3 KB |
| Agent Ltr | Cover Letter(s) | 2014-01-06 | PDF 32.4 KB |
| Cvr Ltr | Cover Letter(s) | 2014-01-06 | PDF 29.9 KB |
| App Ltr | Cover Letter(s) | 2013-12-11 | PDF 26.3 KB |
| Auth Ltr | Cover Letter(s) | 2013-12-11 | PDF 32.7 KB |
| Cvr Ltr | Cover Letter(s) | 2013-12-11 | PDF 29.8 KB |
| MPE | RF Exposure Info | 2014-01-06 | PDF 66.9 KB |
Application Information
| Application ID | ziBN1CSGg2YirYvcEE+lNQ== |
|---|---|
| Final Action Date | 2014-01-06 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008852949 |
| Model | -TPSWT41 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth Module |
| Responsible Party | Ferdinand Riodique, friodique@topcon.com , 925-245-8300 |
| Agent | Mark Mark Mark, National Technical Systems - Silicon Valley, svdoc@nts.com  , 5105783500 |
| Technical Contact | Mark Hill, National Technical Systems - Silicon Valley, svdoc@nts.com , 5105783500 |
| Test Firm | Betty Matteson, National Technical Systems (NTS), BETTYM@NTSCORP.COM  , 714-879-6110 |
| TCB Email | svtcb@nts.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter, as described in this filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance, and may not be provided with any instructions on how to remove or install the device. Only the antennas listed with this filing and documented in filings under this FCC ID may be used with this module. This Grant covers variants WT41A and WT41N. Class 2 Permissive Change for LMA mobile host installation including co-location as documented within this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ziBN1CSGg2YirYvcEE+lNQ== | 2014-01-06 | Class II permissive change or modification of presently authorized equipment |
| geMBE4KSpu9yyE/AF3Tmww== | 2013-12-11 | Change in identification of presently authorized equipment. Original FCC ID: QOQWT41 Grant Date: 05/15/2013 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0410000 | 15C |
Grants
TCB Grant - Application ziBN1CSGg2YirYvcEE+lNQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
National Technical Systems - Silicon Valley 41039 Boyce Road Fremont, CA 94538 |
Date of Grant: 01/06/2014 Application Dated: 01/06/2014 |
| Topcon Positioning Systems, Inc. |
| 7400 National Drive |
| Livermore, CA 94551 |
| Attention: Ferdinand Riodique |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WR4-TPSWT41 |
| Name of Grantee: | Topcon Positioning Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.041 |
| Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter, as described in this filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance, and may not be provided with any instructions on how to remove or install the device. Only the antennas listed with this filing and documented in filings under this FCC ID may be used with this module. This Grant covers variants WT41A and WT41N. Class 2 Permissive Change for LMA mobile host installation including co-location as documented within this filing. |
EAS Grant - Application ziBN1CSGg2YirYvcEE+lNQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Topcon Positioning Systems, Inc. 7400 National Drive Livermore, CA 94551 United States |
Date of Grant: 01/06/2014 Application Dated: 01/06/2014 |
| Attention: Ferdinand Riodique |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WR4-TPSWT41 |
| Name of Grantee: | Topcon Positioning Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.041 |
| Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter, as described in this filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance, and may not be provided with any instructions on how to remove or install the device. Only the antennas listed with this filing and documented in filings under this FCC ID may be used with this module. This Grant covers variants WT41A and WT41N. Class 2 Permissive Change for LMA mobile host installation including co-location as documented within this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
National Technical Systems - Silicon Valley 41039 Boyce Road Fremont, CA 94538 |
Date of Grant: 12/11/2013 Application Dated: 12/11/2013 |
| Topcon Positioning Systems, Inc. |
| 7400 National Drive |
| Livermore, CA 94551 |
| Attention: Ferdinand Riodique |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WR4-TPSWT41 |
| Name of Grantee: | Topcon Positioning Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.041 |
| Output power listed is conducted. Single Modular Approval for mixed mobile and portable RF Exposure conditions, this transmitter must be installed to provide a separation distance of at least 22 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. Only the antennas listed with this filing and documented in the test report and user manual can be used with this module. This Grant covers variants WT41A and WT41N. |
EAS Grant - Application geMBE4KSpu9yyE/AF3Tmww==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Topcon Positioning Systems, Inc. 7400 National Drive Livermore, CA 94551 United States |
Date of Grant: 12/11/2013 Application Dated: 12/11/2013 |
| Attention: Ferdinand Riodique |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WR4-TPSWT41 |
| Name of Grantee: | Topcon Positioning Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.041 |
| Output power listed is conducted. Single Modular Approval for mixed mobile and portable RF Exposure conditions, this transmitter must be installed to provide a separation distance of at least 22 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. Only the antennas listed with this filing and documented in the test report and user manual can be used with this module. This Grant covers variants WT41A and WT41N. |
| Mail To: |