FCC ID WR4-TPSWT41E
Bluetooth Module
by Topcon Positioning Systems, Inc.
Grantee Code: WR4 Product Code: TPSWT41E
Latest application date: 2013-04-04
FCC ID Device Details
| FCC ID | WR4-TPSWT41E |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | WR4 |
| Product Code | TPSWT41E |
| Applicant Business | Topcon Positioning Systems, Inc. 🇺🇸 |
| Related Domains | |
| Equipment Class | Bluetooth Module |
| Test Firm | National Technical Systems - Silicon Valley |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-04-04 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: QOQWT41E Grant Date: 12/13/2011 | 2013-02-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Ext Photos | External Photos | 2013-02-28 | PDF 220.4 KB |
| Lbl info | ID Label/Location Info | 2013-02-28 | PDF 180.6 KB |
| Auth Ltr | Cover Letter(s) | 2013-04-04 | PDF 31.1 KB |
| Cvr Ltr | Cover Letter(s) | 2013-04-04 | PDF 30.1 KB |
| Agent Ltr | Cover Letter(s) | 2013-02-28 | PDF 31.1 KB |
| Auth Ltr | Cover Letter(s) | 2013-02-28 | PDF 29.8 KB |
| Cvr Ltr | Cover Letter(s) | 2013-02-28 | PDF 29.9 KB |
| MPE | RF Exposure Info | 2013-04-04 | PDF 71 KB |
Application Information
| Application ID | kUW5+2s9f0qpLlKLMOXOQQ== |
|---|---|
| Final Action Date | 2013-04-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008852949 |
| Model | -TPSWT41E |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth Module |
| Responsible Party | Ferdinand Riodique, friodique@topcon.com |
| Agent | Mark Mark Mark, National Technical Systems - Silicon Valley, svdoc@nts.com |
| Technical Contact | Mark Hill, National Technical Systems - Silicon Valley, svdoc@nts.com |
| Test Firm | David Bare, National Technical Systems - Silicon Valley, david.bare@nts.com |
| TCB Email | svtcb@nts.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. This device is approved as a mobile transmitter with respect to RF exposure compliance and may only be marketed to OEM installers. The antenna(s) used for this transmitter, as described in this filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. When co-located, use is limited to integration by Topcon and requires a separation distance of 25 cm. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| kUW5+2s9f0qpLlKLMOXOQQ== | 2013-04-04 | Class II permissive change or modification of presently authorized equipment |
| GRmldxGi8Hdjo0cQ/7Kx4A== | 2013-02-28 | Change in identification of presently authorized equipment. Original FCC ID: QOQWT41E Grant Date: 12/13/2011 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0393000 | 15C |
Grants
TCB Grant - Application kUW5+2s9f0qpLlKLMOXOQQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
National Technical Systems - Silicon Valley 41039 Boyce Road Fremont, CA 94538 |
Date of Grant: 04/04/2013 Application Dated: 04/04/2013 |
| Topcon Positioning Systems, Inc. |
| 7400 National Drive |
| Livermore, CA 94551 |
| Attention: Ferdinand Riodique |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WR4-TPSWT41E |
| Name of Grantee: | Topcon Positioning Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0393 |
| Power output listed is conducted. This device is approved as a mobile transmitter with respect to RF exposure compliance and may only be marketed to OEM installers. The antenna(s) used for this transmitter, as described in this filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. When co-located, use is limited to integration by Topcon and requires a separation distance of 25 cm. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application kUW5+2s9f0qpLlKLMOXOQQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Topcon Positioning Systems, Inc. 7400 National Drive Livermore, CA 94551 United States |
Date of Grant: 04/04/2013 Application Dated: 04/04/2013 |
| Attention: Ferdinand Riodique |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WR4-TPSWT41E |
| Name of Grantee: | Topcon Positioning Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0393 |
| Power output listed is conducted. This device is approved as a mobile transmitter with respect to RF exposure compliance and may only be marketed to OEM installers. The antenna(s) used for this transmitter, as described in this filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. When co-located, use is limited to integration by Topcon and requires a separation distance of 25 cm. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
National Technical Systems - Silicon Valley 41039 Boyce Road Fremont, CA 94538 |
Date of Grant: 02/28/2013 Application Dated: 02/28/2013 |
| Topcon Positioning Systems, Inc. |
| 7400 National Drive |
| Livermore, CA 94551 |
| Attention: Ferdinand Riodique |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WR4-TPSWT41E |
| Name of Grantee: | Topcon Positioning Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0393 |
| Power output listed is conducted. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application GRmldxGi8Hdjo0cQ/7Kx4A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Topcon Positioning Systems, Inc. 7400 National Drive Livermore, CA 94551 United States |
Date of Grant: 02/28/2013 Application Dated: 02/28/2013 |
| Attention: Ferdinand Riodique |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WR4-TPSWT41E |
| Name of Grantee: | Topcon Positioning Systems, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0393 |
| Power output listed is conducted. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |