FCC ID WS2-WG78SBV0
WiFi and Bluetooth Module
by Jorjin Technologies Inc.
Grantee Code: WS2 Product Code: WG78SBV0
Latest application date: 2016-02-22
FCC ID Device Details
| FCC ID | WS2-WG78SBV0 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | WS2 |
| Product Code | WG78SBV0 |
| Applicant Business | Jorjin Technologies Inc. 🇹🇼 |
| Related Domains |  jorjin.com.tw |
| Equipment Class | WiFi and Bluetooth Module |
| Test Firm | SPORTON International Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 09/15/2015 | 2016-02-22 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 09/15/2015 | 2016-02-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2016-08-18 | PDF 274 KB |
| Label Location | ID Label/Location Info | 2016-02-22 | PDF 87.5 KB |
| Label Sample | ID Label/Location Info | 2016-02-22 | PDF 38.5 KB |
| Change in FCC ID New Grantee | Cover Letter(s) | 2016-02-22 | PDF 26.3 KB |
| Change in FCC ID Original Grantee | Cover Letter(s) | 2016-02-22 | PDF 43.2 KB |
| Confidentiality Request Letter Short Term | Cover Letter(s) | 2016-02-22 | PDF 21.1 KB |
| POA | Cover Letter(s) | 2016-02-22 | PDF 29.3 KB |
Application Information
| Application ID | m4Ux4cZkggLGScc3gZoojQ== |
|---|---|
| Final Action Date | 2016-02-22 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 09/15/2015 |
| Applicant FRN | 0018187252 |
| Model | WG78SBV0 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WiFi and Bluetooth Module |
| Responsible Party | Alan Lin, Engineering Vice President, alanlin@jorjin.com.tw , +886-2-2649-0055 |
| Test Firm | Alex Chen, SPORTON International Inc., alex@sporton.com.tw  , 886-3-327-3456 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/18/2016 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is maximum combined conducted output power. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth modes. A C2PC was certified on 9/15/2015 to add the following antennas: PCB Ethertronics -0.6dBi, Dipole LSR 2dBi, PCB Laird 2dbi, chip Pulse 3.2dBi, PIFA LSR 2dBi, and Chip, TDK 2.4dBi. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| m4Ux4cZkggLGScc3gZoojQ== | 2016-02-22 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 09/15/2015 |
| NvrMOn6fiwbn4kvfHWcwng== | 2016-02-22 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 09/15/2015 |
Equipment Authorization
Grants
TCB Grant - Application NvrMOn6fiwbn4kvfHWcwng==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/22/2016 Application Dated: 02/19/2016 |
| Jorjin Technologies Inc. |
| 17F.-1, NO.239, SEC. 1, DATONG RD., XIZHI DIST. |
| New Taipei City, 22161 Taiwan |
| Attention: Alan Lin , Engineering Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WS2-WG78SBV0 |
| Name of Grantee: | Jorjin Technologies Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. A C2PC was certified on 9/15/2015 to add the following antennas: PCB Ethertronics -0.6dBi, Dipole LSR 2dBi, PCB Laird 2dbi, chip Pulse 3.2dBi, PIFA LSR 2dBi, and Chip, TDK 2.4dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application NvrMOn6fiwbn4kvfHWcwng==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Jorjin Technologies Inc. 17F.-1, NO.239, SEC. 1, DATONG RD., XIZHI DIST. New Taipei City, 22161 Taiwan |
Date of Grant: 02/22/2016 Application Dated: 02/19/2016 |
| Attention: Alan Lin , Engineering Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WS2-WG78SBV0 |
| Name of Grantee: | Jorjin Technologies Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. A C2PC was certified on 9/15/2015 to add the following antennas: PCB Ethertronics -0.6dBi, Dipole LSR 2dBi, PCB Laird 2dbi, chip Pulse 3.2dBi, PIFA LSR 2dBi, and Chip, TDK 2.4dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/22/2016 Application Dated: 02/19/2016 |
| Jorjin Technologies Inc. |
| 17F.-1, NO.239, SEC. 1, DATONG RD., XIZHI DIST. |
| New Taipei City, 22161 Taiwan |
| Attention: Alan Lin , Engineering Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WS2-WG78SBV0 |
| Name of Grantee: | Jorjin Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Modular Approval. Power listed is maximum combined conducted output power. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth modes. A C2PC was certified on 9/15/2015 to add the following antennas: PCB Ethertronics -0.6dBi, Dipole LSR 2dBi, PCB Laird 2dbi, chip Pulse 3.2dBi, PIFA LSR 2dBi, and Chip, TDK 2.4dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application m4Ux4cZkggLGScc3gZoojQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Jorjin Technologies Inc. 17F.-1, NO.239, SEC. 1, DATONG RD., XIZHI DIST. New Taipei City, 22161 Taiwan |
Date of Grant: 02/22/2016 Application Dated: 02/19/2016 |
| Attention: Alan Lin , Engineering Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WS2-WG78SBV0 |
| Name of Grantee: | Jorjin Technologies Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Modular Approval. Power listed is maximum combined conducted output power. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth modes. A C2PC was certified on 9/15/2015 to add the following antennas: PCB Ethertronics -0.6dBi, Dipole LSR 2dBi, PCB Laird 2dbi, chip Pulse 3.2dBi, PIFA LSR 2dBi, and Chip, TDK 2.4dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |