FCC ID WSP-EZ1300102

SRD Module

by Hermann Sewerin GmbH

Grantee Code: WSP   Product Code: EZ1300102
Latest application date: 2015-11-04

Device Images

FCC ID Device Details

FCC IDWSP-EZ1300102
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeWSP
Product CodeEZ1300102
Applicant BusinessHermann Sewerin GmbH 🇩🇪
Related Domains sewerin.com
Equipment ClassSRD Module
Test FirmPhoenix TestLab GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2408-2476 MHzClass II permissive change or modification of presently authorized equipment2015-11-04
2408-2476 MHzClass II permissive change or modification of presently authorized equipment2015-11-04
2408-2476 MHzOriginal Equipment2010-02-24

Exhibits

DocumentTypeAvailableFile
Integration ManualUsers Manual2015-11-04PDF 461.7 KB
user manualUsers Manual2015-11-04PDF 461.7 KB
Int PhotosInternal Photos2015-11-04PDF 1.3 MB
ext photosExternal Photos2015-11-04PDF 297.3 KB
ext photosExternal Photos2015-11-04PDF 690 KB
External PhotosExternal Photos2010-02-24PDF 1.4 MB
Label LocationID Label/Location Info2010-02-24PDF 39.8 KB
Test setup photosTest Setup Photos2015-11-04PDF 448.7 KB
Test setup photosTest Setup Photos2015-11-04PDF 147.7 KB
TEst Setup PhotosTest Setup Photos2010-02-24PDF 1.6 MB
Test reportTest Report2015-11-04PDF 366.9 KB
test reportTest Report2015-11-04PDF 338.6 KB
Test ReportTest Report2010-02-24PDF 847 KB
Antenna SpecificationCover Letter(s)2015-11-04PDF 534.2 KB
C2P RequestCover Letter(s)2015-11-04PDF 48.8 KB
C2PC Change letterCover Letter(s)2015-11-04PDF 18.5 KB
C2PC letterCover Letter(s)2015-11-04PDF 49.7 KB
PoACover Letter(s)2015-11-04PDF 259.1 KB
PoaCover Letter(s)2015-11-04PDF 259.1 KB
Antenna DeclarationsCover Letter(s)2010-02-24PDF 37.3 KB
Antenna InfoCover Letter(s)2010-02-24PDF 14 KB
Request MACover Letter(s)2010-02-24PDF 20 KB

Application Information

Application ID6hRRp2Ok/esDV6S4qNqIWQ==
Final Action Date2015-11-04
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0018174581
ModelEZ1300102
Frequency Range2408-2476 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionSRD Module
Responsible PartyChristian Kreienbrinck, Development / Graduate engineer, Christian.Kreienbrinck@sewerin.com , +49-05241-934319
AgentUwe Uwe Uwe, Phoenix Testlab GmbH, dollitz.uwe@phoenix-testlab.de , +4952359500-
Test FirmH. Altmaier, Phoenix TestLab GmbH, office@phoenix-testlab.de , 49-5235-9500-0
TCB EmailBrandhorst.dirk@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change adds new antenna (different type, higher gain) as documented in this filing. Output power listed is conducted. Approval is limited to OEM installation only. End users may not be provided with instructions to remove or install this device. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Applications

Application IDDatePurpose
6hRRp2Ok/esDV6S4qNqIWQ==2015-11-04Class II permissive change or modification of presently authorized equipment
022sW4dLZnkF2r4vIVKALQ==2015-11-04Class II permissive change or modification of presently authorized equipment
2QF+FdhfEsR3xFyH3Fzwmw==2010-02-24Original Equipment

Equipment Authorization

FrequencyOutputRules
2408-2476 MHz0.007900015C

Grants

TCB Grant - Application 6hRRp2Ok/esDV6S4qNqIWQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/04/2015

Application Dated: 11/04/2015
Hermann Sewerin GmbH
Robert-Bosch-Strasse 3
Guetersloh, 33334
Germany
 
Attention: Christian Kreienbrinck , Development / Graduate engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WSP-EZ1300102
Name of Grantee:  Hermann Sewerin GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: SRD Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2408.0  -  2476.0 0.0079  

Class II permissive change adds new antenna (different type, higher gain) as documented in this filing.

Output power listed is conducted. Approval is limited to OEM installation only. End users may not be provided with instructions to remove or install this device. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.


EAS Grant - Application 6hRRp2Ok/esDV6S4qNqIWQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hermann Sewerin GmbH
Robert-Bosch-Strasse 3
Guetersloh, 33334
Germany
  Date of Grant: 11/04/2015

Application Dated: 11/04/2015
 
Attention: Christian Kreienbrinck , Development / Graduate engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WSP-EZ1300102
Name of Grantee:  Hermann Sewerin GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: SRD Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2408.0  -  2476.0 0.0079  

Class II permissive change adds new antenna (different type, higher gain) as documented in this filing.

Output power listed is conducted. Approval is limited to OEM installation only. End users may not be provided with instructions to remove or install this device. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.



TCB Grant - Application 2QF+FdhfEsR3xFyH3Fzwmw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 02/24/2010

Application Dated: 02/24/2010
Hermann Sewerin GmbH
Robert-Bosch-Strasse 3
Guetersloh, 33326
Germany
 
Attention: Christian Kreienbrinck , Development / Graduate engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WSP-EZ1300102
Name of Grantee:  Hermann Sewerin GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: SRD Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2408.0  -  2476.0 0.0079  

Output power listed is conducted. Approval is limited to OEM installation only. End users may not be provided with instructions to remove or install this device. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.


EAS Grant - Application 2QF+FdhfEsR3xFyH3Fzwmw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hermann Sewerin GmbH
Robert-Bosch-Strasse 3 P.O. Box ,
Guetersloh, 33326
Germany
  Date of Grant: 02/24/2010

Application Dated: 02/24/2010
 
Attention: Christian Kreienbrinck , Development / Graduate engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WSP-EZ1300102
Name of Grantee:  Hermann Sewerin GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: SRD Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2408.0  -  2476.0 0.0079  

Output power listed is conducted. Approval is limited to OEM installation only. End users may not be provided with instructions to remove or install this device. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.



TCB Grant - Application 022sW4dLZnkF2r4vIVKALQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/04/2015

Application Dated: 11/04/2015
Hermann Sewerin GmbH
Robert-Bosch-Strasse 3
Guetersloh, 33334
Germany
 
Attention: Christian Kreienbrinck , Development / Graduate engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WSP-EZ1300102
Name of Grantee:  Hermann Sewerin GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: SRD Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2408.0  -  2476.0 0.0079  

Class II Permissive Change filing adds the simultaeanous transmission of two of this modular approved transmitters with different antennas inside the specific host configuration. The transmitter module with the higher gain antenna has a reduced output power as documented in the filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Output power listed is conducted. Approval is limited to OEM installation only. End users may not be provided with instructions to remove or install this device. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter, except in accordance with the FCC multi-transmitter policy.


EAS Grant - Application 022sW4dLZnkF2r4vIVKALQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hermann Sewerin GmbH
Robert-Bosch-Strasse 3
Guetersloh, 33334
Germany
  Date of Grant: 11/04/2015

Application Dated: 11/04/2015
 
Attention: Christian Kreienbrinck , Development / Graduate engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WSP-EZ1300102
Name of Grantee:  Hermann Sewerin GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: SRD Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2408.0  -  2476.0 0.0079  

Class II Permissive Change filing adds the simultaeanous transmission of two of this modular approved transmitters with different antennas inside the specific host configuration. The transmitter module with the higher gain antenna has a reduced output power as documented in the filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Output power listed is conducted. Approval is limited to OEM installation only. End users may not be provided with instructions to remove or install this device. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter, except in accordance with the FCC multi-transmitter policy.



Mail To: