FCC ID WT7PTRUNK25RF800

RF UNIT 806-870 MHz BASE STATION RADIO/REPEATER

by Teltronic S.A.U.

Grantee Code: WT7   Product Code: PTRUNK25RF800
Latest application date: 2010-09-07

FCC ID Device Details

FCC IDWT7PTRUNK25RF800
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeWT7
Product CodePTRUNK25RF800
Applicant BusinessTeltronic S.A.U. 🇪🇸
Related Domains teltronic.es
Equipment ClassRF UNIT 806-870 MHz BASE STATION RADIO/REPEATER
Test FirmTimco Engineering, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
851.01-868.99 MHzClass II permissive change or modification of presently authorized equipment2010-09-07
851.01-868.99 MHzOriginal Equipment2008-12-01

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2009-01-10PDF 339.5 KB
Annex Changes RF UnitInternal Photos2010-10-18PDF 682.8 KB
Backplane RF unitInternal Photos2010-10-18PDF 499.7 KB
Bsync RF unitInternal Photos2010-10-18PDF 252.3 KB
RCPU RF unitInternal Photos2010-10-18PDF 467.8 KB
RPS RF unitInternal Photos2010-10-18PDF 456.6 KB
RTX P25 UnitInternal Photos2010-10-18PDF 1.1 MB
Internal PhotosInternal Photos2009-01-10PDF 2 MB
Internal Photos 2Internal Photos2009-01-10PDF 2.4 MB
External PhotosExternal Photos2009-01-10PDF 448.6 KB
Label InformationID Label/Location Info2008-12-01PDF 30.1 KB
Test Setup PhotosTest Setup Photos2009-01-10PDF 1 MB
Test ReportTest Report2010-09-07PDF 309.3 KB
Test ReportTest Report2008-12-01PDF 176.5 KB
Confidential LetterCover Letter(s)2010-09-07PDF 365.4 KB
Cover LetterCover Letter(s)2010-09-07PDF 224.2 KB
Confidential LetterCover Letter(s)2008-12-01PDF 595.4 KB

Application Information

Application ID4ITfx6GezWY7G0q2e8NVrA==
Final Action Date2010-09-07
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017876152
ModelPTRUNK25RF800
Frequency Range851.01-868.99 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionRF UNIT 806-870 MHz BASE STATION RADIO/REPEATER
Responsible PartyJose Roman, j-roman@teltronic.es , 34 976 465656
Test FirmSid Sanders, Timco Engineering, Inc., tei@timcoengr.com , 352-472-5500
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/18/2010
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 100 W and the peak radiated output power must not exceed 1000 W ERP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance. Power listed is adjustable in 2dB steps down to 0.6W from the listed value. NOTE 1: 8K10F1W, 8K10F1E, 8K10F1D, 11K0F3E, 16K0F3E, 8K70D7W, 8K70D7D, 8K70D7E

Applications

Application IDDatePurpose
4ITfx6GezWY7G0q2e8NVrA==2010-09-07Class II permissive change or modification of presently authorized equipment
2m0Rkd720MwrayXvh6QMBQ==2008-12-01Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
851.01-868.99 MHz1000.1ppm8K10F1W9
851.01-868.99 MHz100.00000000.1000000000ppmNOTE 190
851.01-868.99 MHz1000.1ppm11K0F3E9
851.01-868.99 MHz1000.1ppm16K0F3E9

Grants

TCB Grant - Application 4ITfx6GezWY7G0q2e8NVrA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 09/07/2010

Application Dated: 09/03/2010
Teltronic S.A.U.
Poligono Malpica Calle F-O
Parcela 12
Zaragoza, 50016
Spain
 
Attention: Jose Roman

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT7PTRUNK25RF800
Name of Grantee:  Teltronic S.A.U.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: RF UNIT 806-870 MHz BASE STATION RADIO/REPEATER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 851.01  -  868.99 100.0 0.1  PM NOTE 1

Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 100 W and the peak radiated output power must not exceed 1000 W ERP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Power listed is adjustable in 2dB steps down to 0.6W from the listed value.

NOTE 1: 8K10F1W, 8K10F1E, 8K10F1D, 11K0F3E, 16K0F3E, 8K70D7W, 8K70D7D, 8K70D7E


EAS Grant - Application 4ITfx6GezWY7G0q2e8NVrA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Teltronic S.A.U.
Poligono Malpica Calle F-O Parcela 12
Zaragoza, 50016
Spain
  Date of Grant: 09/07/2010

Application Dated: 09/03/2010
 
Attention: Jose Roman

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT7PTRUNK25RF800
Name of Grantee:  Teltronic S.A.U.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: RF UNIT 806-870 MHz BASE STATION RADIO/REPEATER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 851.01  -  868.99 100.0 0.1  PM NOTE 1

Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 100 W and the peak radiated output power must not exceed 1000 W ERP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Power listed is adjustable in 2dB steps down to 0.6W from the listed value.

NOTE 1: 8K10F1W, 8K10F1E, 8K10F1D, 11K0F3E, 16K0F3E, 8K70D7W, 8K70D7D, 8K70D7E



TCB Grant - Application 2m0Rkd720MwrayXvh6QMBQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 12/01/2008

Application Dated: 11/26/2008
Teltronic S.A.U.
Poligono Malpica Calle F-O
Parcela 12
Zaragoza, 50016
Spain
 
Attention: Jose Roman

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT7PTRUNK25RF800
Name of Grantee:  Teltronic S.A.U.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: RF Unit P25 Base Station Radio/Repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 851.01  -  868.99 100.0 0.1  PM 8K10F1W
90 851.01  -  868.99 100.0 0.1  PM 11K0F3E
90 851.01  -  868.99 100.0 0.1  PM 16K0F3E

Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 100 W and the peak radiated output power must not exceed 1000 W ERP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

EAS Grant - Application 2m0Rkd720MwrayXvh6QMBQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Teltronic S.A.U.
Poligono Malpica Calle F-O Parcela 12
Zaragoza, 50016
Spain
  Date of Grant: 12/01/2008

Application Dated: 11/26/2008
 
Attention: Jose Roman

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT7PTRUNK25RF800
Name of Grantee:  Teltronic S.A.U.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: RF Unit P25 Base Station Radio/Repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 851.01  -  868.99 100.0 0.1  PM 8K10F1W
90 851.01  -  868.99 100.0 0.1  PM 11K0F3E
90 851.01  -  868.99 100.0 0.1  PM 16K0F3E

Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 100 W and the peak radiated output power must not exceed 1000 W ERP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.



Mail To: