FCC ID WT8DNWAP440
2x2 WiFi 6 Access Point
by Datto, Inc.
Grantee Code: WT8 Product Code: DNWAP440
Latest application date: 2021-11-24
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-11-24 |
| 2412-2462 MHz | Original Equipment | 2021-11-17 |
| 5180-5240 MHz | Original Equipment | 2021-11-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual_rev | Users Manual | 2021-11-17 | PDF 1.3 MB |
| Users manual rev | Users Manual | 2021-11-17 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2021-11-17 | PDF 1.9 MB |
| Internal photos | Internal Photos | 2021-11-17 | PDF 1.9 MB |
| External Photos | External Photos | 2021-11-17 | PDF 373.7 KB |
| External photos | External Photos | 2021-11-17 | PDF 373.7 KB |
| Label Sample & Label Location | ID Label/Location Info | 2021-11-17 | PDF 274.3 KB |
| Label sample and label location | ID Label/Location Info | 2021-11-17 | PDF 274.3 KB |
| Test setup photos | Test Setup Photos | 2021-11-24 | PDF 709.7 KB |
| Test setup photos (DFS) | Test Setup Photos | 2021-11-24 | PDF 209.8 KB |
| Test Report (NII) | Test Report | 2021-11-24 | PDF 3.3 MB |
| Test report (DFS) rev | Test Report | 2021-11-24 | PDF 3.4 MB |
| Test report (DTS-WLAN) | Test Report | 2021-11-17 | PDF 2.5 MB |
| Test report (NII) rev | Test Report | 2021-11-17 | PDF 1.5 MB |
| Attestation (DFS Master Declaration) | Attestation Statements | 2021-11-24 | PDF 206.1 KB |
| Attestation (Channel and Mode Declaration) | Attestation Statements | 2021-11-17 | PDF 245 KB |
| Attestation (Professional Installation Declaration) | Attestation Statements | 2021-11-17 | PDF 233.9 KB |
| Confidentiality Request | Cover Letter(s) | 2021-11-24 | PDF 236.3 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2021-11-24 | PDF 253.4 KB |
| Description of Change | Cover Letter(s) | 2021-11-24 | PDF 56.3 KB |
| Agent Authorization | Cover Letter(s) | 2021-11-17 | PDF 254.3 KB |
| Agent authorization | Cover Letter(s) | 2021-11-17 | PDF 254.3 KB |
| Confidentiality Request | Cover Letter(s) | 2021-11-17 | PDF 240.1 KB |
| Confidentiality request | Cover Letter(s) | 2021-11-17 | PDF 240.1 KB |
| RF Exposure Info (MPE) | RF Exposure Info | 2021-11-24 | PDF 496.1 KB |
| RF Exposure Info (MPE) | RF Exposure Info | 2021-11-17 | PDF 172.9 KB |
| RF exposure info (MPE) | RF Exposure Info | 2021-11-17 | PDF 172.9 KB |
| Block diagram Metadata only | Block Diagram | PDF 174.4 KB | |
| Schematics Metadata only | Schematics | PDF 1.4 MB | |
| Operational Description Metadata only | Operational Description | PDF 501.5 KB | |
| Operational Description (Geolocation)-1 Metadata only | Operational Description | PDF 491.3 KB | |
| Operational Description (Geolocation)-2 Metadata only | Operational Description | PDF 479.6 KB | |
| Operational Description rev Metadata only | Operational Description | PDF 253.3 KB | |
| Operational Description-Antenna Spec Metadata only | Operational Description | PDF 342.2 KB | |
| Software Operational Description Metadata only | Operational Description | PDF 334 KB | |
| Software Operational Description rev3 Metadata only | Operational Description | PDF 322.2 KB |
Application Information
| Application ID | UpQHjakU91F8zGqbiWqfNA== |
|---|---|
| Final Action Date | 2021-11-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026323543 |
| Model | DNWAP440 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 2x2 WiFi 6 Access Point |
| Responsible Party | Benjamin Townsend, Senior Compliance Analyst, Btownsend@datto.com  , 8882946312 |
| Agent | Andrea Andrea Andrea, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, andrea.hsia@bureauveritas.com  , 886-3-3183232 |
| Test Firm | Eric Lin, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, eric-wp.lin@tw.bureauveritas.com  , 886-3-6668565 |
| TCB Email | certification@nacsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II Permissive Change to add frequency bands 5.26-5.32GHz and 5.50-5.72GHz via software enabling as described in this filing. Power listed is maximum conducted output power. Professional installation required. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 22 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device is restricted to indoor use only when configured for Indoor AP operation as described in this filing by the professional installer. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| UpQHjakU91F8zGqbiWqfNA== | 2021-11-24 | Class II permissive change or modification of presently authorized equipment |
| p/FiuFlE5/RV3uubhf2q/g== | 2021-11-17 | Original Equipment |
| b5OsVwj3FtMMObhYos/yZw== | 2021-11-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application UpQHjakU91F8zGqbiWqfNA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 11/24/2021 Application Dated: 11/20/2021 |
| Datto, Inc. |
| 101 Merritt 7 |
| Norwalk, CT 06851 |
| Attention: Benjamin Townsend , Senior Compliance Analyst |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WT8DNWAP440 |
| Name of Grantee: | Datto, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2x2 WiFi 6 Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.66 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.742 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.246 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.248 |
| Class II Permissive Change to add frequency bands 5.26-5.32GHz and 5.50-5.72GHz via software enabling as described in this filing. Power listed is maximum conducted output power. Professional installation required. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 22 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device is restricted to indoor use only when configured for Indoor AP operation as described in this filing by the professional installer. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application UpQHjakU91F8zGqbiWqfNA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Datto, Inc. 101 Merritt 7 Norwalk, CT 06851 United States |
Date of Grant: 11/24/2021 Application Dated: 11/20/2021 |
| Attention: Benjamin Townsend , Senior Compliance Analyst |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WT8DNWAP440 |
| Name of Grantee: | Datto, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2x2 WiFi 6 Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.66 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.742 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.246 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.248 |
| Class II Permissive Change to add frequency bands 5.26-5.32GHz and 5.50-5.72GHz via software enabling as described in this filing. Power listed is maximum conducted output power. Professional installation required. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 22 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device is restricted to indoor use only when configured for Indoor AP operation as described in this filing by the professional installer. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 11/17/2021 Application Dated: 10/14/2021 |
| Datto, Inc. |
| 101 Merritt 7 |
| Norwalk, CT 06851 |
| Attention: Benjamin Townsend , Senior Compliance Analyst |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WT8DNWAP440 |
| Name of Grantee: | Datto, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2x2 WiFi 6 Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.753 |
| Power listed is maximum conducted output power. Professional installation required. This device supports 20 and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 22 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application p/FiuFlE5/RV3uubhf2q/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Datto, Inc. 101 Merritt 7 Norwalk, CT 06851 United States |
Date of Grant: 11/17/2021 Application Dated: 10/14/2021 |
| Attention: Benjamin Townsend , Senior Compliance Analyst |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WT8DNWAP440 |
| Name of Grantee: | Datto, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2x2 WiFi 6 Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.753 |
| Power listed is maximum conducted output power. Professional installation required. This device supports 20 and 40 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 22 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 11/17/2021 Application Dated: 10/14/2021 |
| Datto, Inc. |
| 101 Merritt 7 |
| Norwalk, CT 06851 |
| Attention: Benjamin Townsend , Senior Compliance Analyst |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WT8DNWAP440 |
| Name of Grantee: | Datto, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2x2 WiFi 6 Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.66 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.742 |
| Power listed is maximum conducted output power. Professional installation required. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 22 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device is restricted to indoor use only when configured for Indoor AP operation as described in this filing by the professional installer. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application b5OsVwj3FtMMObhYos/yZw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Datto, Inc. 101 Merritt 7 Norwalk, CT 06851 United States |
Date of Grant: 11/17/2021 Application Dated: 10/14/2021 |
| Attention: Benjamin Townsend , Senior Compliance Analyst |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WT8DNWAP440 |
| Name of Grantee: | Datto, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2x2 WiFi 6 Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.66 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.742 |
| Power listed is maximum conducted output power. Professional installation required. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 22 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device is restricted to indoor use only when configured for Indoor AP operation as described in this filing by the professional installer. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |