FCC ID WT8DNWAP840
WiFi6 indoor Access Point
by Datto, Inc.
Grantee Code: WT8 Product Code: DNWAP840
Latest application date: 2021-08-23
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-23 |
| 2402-2480 MHz | Original Equipment | 2021-01-25 |
| 5180-5240 MHz | Original Equipment | 2021-01-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual 1 | Users Manual | 2021-01-25 | PDF 4.7 MB |
| User Manual 2 | Users Manual | 2021-01-25 | PDF 3.8 MB |
| Users Manual 1 | Users Manual | 2021-01-25 | PDF 4.7 MB |
| Users Manual 2 | Users Manual | 2021-01-25 | PDF 3.8 MB |
| Internal Photos 1 | Internal Photos | 2021-01-25 | PDF 5.4 MB |
| Internal Photos 2 | Internal Photos | 2021-01-25 | PDF 1.6 MB |
| External Photos | External Photos | 2021-01-25 | PDF 693.4 KB |
| Label info | ID Label/Location Info | 2021-01-25 | PDF 319.4 KB |
| Test Setup Photos | Test Setup Photos | 2021-08-23 | PDF 776.1 KB |
| Test Setup Photos DFS | Test Setup Photos | 2021-08-23 | PDF 357.6 KB |
| Test Report DFS | Test Report | 2021-08-23 | PDF 4.2 MB |
| Test Report NII | Test Report | 2021-08-23 | PDF 3.7 MB |
| Test Report (DTS BT LE) | Test Report | 2021-01-25 | PDF 1.3 MB |
| Test Report (DTS WLAN) | Test Report | 2021-01-25 | PDF 3.2 MB |
| Test Report (co-located) | Test Report | 2021-01-25 | PDF 895.9 KB |
| Test Report (co-located) | RF Exposure Info | 2021-01-25 | PDF 895.9 KB |
| Test Report NII | Test Report | 2021-01-25 | PDF 2.7 MB |
| Attestation DFS Master Dec Letter | Attestation Statements | 2021-08-23 | PDF 335.5 KB |
| Attestation Channel and Mode Dec Letter | Attestation Statements | 2021-01-25 | PDF 253.4 KB |
| Attestation Prof Install Dec Letter | Attestation Statements | 2021-01-25 | PDF 417.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2021-08-23 | PDF 171.2 KB |
| Cover Letter | Cover Letter(s) | 2021-08-23 | PDF 50.5 KB |
| Description of Change Letter | Cover Letter(s) | 2021-08-23 | PDF 50.9 KB |
| LOA Letter | Cover Letter(s) | 2021-08-23 | PDF 249.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2021-01-25 | PDF 253.8 KB |
| POA Letter | Cover Letter(s) | 2021-01-25 | PDF 259 KB |
| RF Exposure | RF Exposure Info | 2021-08-23 | PDF 496.1 KB |
| RF Exp | RF Exposure Info | 2021-01-25 | PDF 449.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 255.6 KB | |
| Schematics Metadata only | Schematics | PDF 2.2 MB | |
| Op Desc Ant Spec Metadata only | Operational Description | PDF 549.7 KB | |
| Op Desc Ant Spec BT Metadata only | Operational Description | PDF 1.2 MB | |
| Operational Description Metadata only | Operational Description | PDF 338.3 KB | |
| Operational Description Metadata only | Operational Description | PDF 328 KB | |
| Op Desc SW Metadata only | SDR Software/Security Inf | PDF 319.9 KB | |
| Op Desc Software Security Metadata only | SDR Software/Security Inf | PDF 269.3 KB |
Application Information
| Application ID | l9px8IwEixhpddBkkYUNOQ== |
|---|---|
| Final Action Date | 2021-08-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026323543 |
| Model | DNWAP840 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | WiFi6 indoor Access Point |
| Responsible Party | Benjamin Townsend, Senior Compliance Analyst, Btownsend@datto.com |
| Test Firm | Eric Lin, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, eric-wp.lin@tw.bureauveritas.com |
| TCB Email | tei@timcoengr.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II permissive change: Adding U-NII-2A, U-NII-2C. Power listed is maximum power conducted. Professional installation required. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 44cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. Professional installation is required. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| l9px8IwEixhpddBkkYUNOQ== | 2021-08-23 | Class II permissive change or modification of presently authorized equipment |
| ob0x4Pb+LC2V5nhTYS8vKA== | 2021-01-25 | Original Equipment |
| kphQ/RaA0rQ+tYHSKhVniw== | 2021-01-25 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ob0x4Pb+LC2V5nhTYS8vKA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/25/2021 Application Dated: 01/22/2021 |
| Datto, Inc. |
| 101 Merritt 7 |
| Norwalk, CT 06851 |
| Attention: Benjamin Townsend , Senior Compliance Analyst |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WT8DNWAP840 |
| Name of Grantee: | Datto, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi6 indoor Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.953 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Power listed is maximum power conducted. Professional installation required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 44cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes. Professional installation is required. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application ob0x4Pb+LC2V5nhTYS8vKA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Datto, Inc. 101 Merritt 7 Norwalk, CT 06851 United States |
Date of Grant: 01/25/2021 Application Dated: 01/22/2021 |
| Attention: Benjamin Townsend , Senior Compliance Analyst |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WT8DNWAP840 |
| Name of Grantee: | Datto, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi6 indoor Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.953 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Power listed is maximum power conducted. Professional installation required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 44cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes. Professional installation is required. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/23/2021 Application Dated: 08/17/2021 |
| Datto, Inc. |
| 101 Merritt 7 |
| Norwalk, CT 06851 |
| Attention: Benjamin Townsend , Senior Compliance Analyst |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WT8DNWAP840 |
| Name of Grantee: | Datto, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi6 indoor Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5260.0 - 5320.0 | 0.201 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.204 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.611 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.963 |
| Class II permissive change: Adding U-NII-2A, U-NII-2C. Power listed is maximum power conducted. Professional installation required. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 44cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. Professional installation is required. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application l9px8IwEixhpddBkkYUNOQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Datto, Inc. 101 Merritt 7 Norwalk, CT 06851 United States |
Date of Grant: 08/23/2021 Application Dated: 08/17/2021 |
| Attention: Benjamin Townsend , Senior Compliance Analyst |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WT8DNWAP840 |
| Name of Grantee: | Datto, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi6 indoor Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5260.0 - 5320.0 | 0.201 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.204 | ||
| CC MO | 15E | 5180.0 - 5240.0 | 0.611 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.963 |
| Class II permissive change: Adding U-NII-2A, U-NII-2C. Power listed is maximum power conducted. Professional installation required. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 44cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. Professional installation is required. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/25/2021 Application Dated: 01/22/2021 |
| Datto, Inc. |
| 101 Merritt 7 |
| Norwalk, CT 06851 |
| Attention: Benjamin Townsend , Senior Compliance Analyst |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WT8DNWAP840 |
| Name of Grantee: | Datto, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi6 indoor Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.611 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.963 |
| Power listed is maximum power conducted. Professional installation required. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 44cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. Professional installation is required. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application kphQ/RaA0rQ+tYHSKhVniw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Datto, Inc. 101 Merritt 7 Norwalk, CT 06851 United States |
Date of Grant: 01/25/2021 Application Dated: 01/22/2021 |
| Attention: Benjamin Townsend , Senior Compliance Analyst |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WT8DNWAP840 |
| Name of Grantee: | Datto, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi6 indoor Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.611 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.963 |
| Power listed is maximum power conducted. Professional installation required. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 44cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. Professional installation is required. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |