FCC ID WT8OM5PAC

Wireless Access Point

by Datto, Inc.

Grantee Code: WT8   Product Code: OM5PAC
Latest application date: 2016-02-02

Device Images

FCC ID Device Details

FCC IDWT8OM5PAC
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeWT8
Product CodeOM5PAC
Applicant BusinessDatto, Inc. 🇺🇸
Related Domains datto.com
Equipment ClassWireless Access Point
Test FirmBureau Veritas CPS (H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-02-02
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2016-02-02
2412-2462 MHzOriginal Equipment2015-05-29
5180-5240 MHzOriginal Equipment2015-05-29

Exhibits

DocumentTypeAvailableFile
User Manual_rev.pdfUsers Manual2015-05-29PDF 3.3 MB
Internal Photos_rev 2.pdfInternal Photos2016-02-02PDF 1.9 MB
Internal Photos.pdfInternal Photos2015-08-27PDF 2.8 MB
External Photos.pdfExternal Photos2016-02-02PDF 674.7 KB
External Photos.pdfExternal Photos2015-08-27PDF 830.5 KB
Label Location.pdfID Label/Location Info2015-05-29PDF 80.6 KB
Label Sample.pdfID Label/Location Info2015-05-29PDF 469 KB
Test Set up photo.pdfTest Setup Photos2016-02-02PDF 319.1 KB
Test Set Up Photo.pdfTest Setup Photos2015-08-27PDF 541.4 KB
Test Report (DTS)_rev.pdfTest Report2016-02-02PDF 892.2 KB
Test Report (NII)_rev 2.pdfTest Report2016-02-02PDF 840.3 KB
Test Report (DTS)_rev.pdfTest Report2015-05-29PDF 4 MB
Test Report (NII).pdfTest Report2015-05-29PDF 718.3 KB
Attestation (Channel and Mode Declaration).pdfAttestation Statements2015-05-29PDF 217 KB
Confidentiality Request.pdfCover Letter(s)2016-02-02PDF 62.5 KB
Cover Letter (Agent Authorization).pdfCover Letter(s)2016-02-02PDF 197.8 KB
Cover Letter (Description of Change).pdfCover Letter(s)2016-02-02PDF 26.2 KB
Confidentiality Request (long-term).pdfCover Letter(s)2015-05-29PDF 111.2 KB
Confidentiality Request (short-term).pdfCover Letter(s)2015-05-29PDF 115.3 KB
Cover Letter (Agent Authorization).pdfCover Letter(s)2015-05-29PDF 138.1 KB
RF Exposure Info (MPE).pdfRF Exposure Info2016-02-02PDF 59.8 KB
RF Exposure Info (MPE).pdfRF Exposure Info2015-05-29PDF 61.8 KB
Block Diagram.pdf Metadata onlyBlock DiagramPDF 247.9 KB
Block Diagram.pdf Metadata onlyBlock DiagramPDF 242 KB
Schematics.pdf Metadata onlySchematicsPDF 778.7 KB
Schematics.pdf Metadata onlySchematicsPDF 1 MB
Operational Description.pdf Metadata onlyOperational DescriptionPDF 37 KB
Software Operating Description.pdf Metadata onlyOperational DescriptionPDF 260.7 KB

Application Information

Application IDnnZz+09N0mef0Rl4PQN3yw==
Final Action Date2016-02-02
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0026323543
ModelOM5PAC
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless Access Point
Responsible PartyBenjamin Townsend, Senior Compliance Analyst, Btownsend@datto.com , 8882946312
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com , +886-3-2600884
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change to update 5.2GHz and 5.8GHz bands to U-NII-1 & U-NII-3 new rules. Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80MHz bandwidth modes.

Applications

Application IDDatePurpose
nnZz+09N0mef0Rl4PQN3yw==2016-02-02Class II permissive change or modification of presently authorized equipment
8zMrlTpAteto85j/4CTrXg==2016-02-02Class II permissive change or modification of presently authorized equipment
UiNEscyINzJIIrbNvN1gAQ==2015-05-29Original Equipment
MttleGEhgZNaVYmXSG9ooA==2015-05-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.384000015CCC, MO
2412-2462 MHz0.47115CCC, MO
5180-5240 MHz0.050000015ECC, MO
5180-5240 MHz0.17515E38, CC, MO
5745-5825 MHz0.1615E38, CC, MO
5745-5825 MHz0.45415CCC, MO

Grants

TCB Grant - Application UiNEscyINzJIIrbNvN1gAQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 05/29/2015

Application Dated: 05/29/2015
Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8OM5PAC
Name of Grantee:  Datto, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.471  
CC MO 15C 5745.0  -  5825.0 0.454  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application UiNEscyINzJIIrbNvN1gAQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
United States
  Date of Grant: 05/29/2015

Application Dated: 05/29/2015
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8OM5PAC
Name of Grantee:  Datto, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.471  
CC MO 15C 5745.0  -  5825.0 0.454  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application nnZz+09N0mef0Rl4PQN3yw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 02/02/2016

Application Dated: 02/02/2016
Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8OM5PAC
Name of Grantee:  Datto, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.175  
38 CC MO 15E 5745.0  -  5825.0 0.16  

Class II Permissive Change to update 5.2GHz and 5.8GHz bands to U-NII-1 & U-NII-3 new rules. Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application nnZz+09N0mef0Rl4PQN3yw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
United States
  Date of Grant: 02/02/2016

Application Dated: 02/02/2016
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8OM5PAC
Name of Grantee:  Datto, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.175  
38 CC MO 15E 5745.0  -  5825.0 0.16  

Class II Permissive Change to update 5.2GHz and 5.8GHz bands to U-NII-1 & U-NII-3 new rules. Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application MttleGEhgZNaVYmXSG9ooA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 05/29/2015

Application Dated: 05/29/2015
Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8OM5PAC
Name of Grantee:  Datto, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.05  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application MttleGEhgZNaVYmXSG9ooA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
United States
  Date of Grant: 05/29/2015

Application Dated: 05/29/2015
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8OM5PAC
Name of Grantee:  Datto, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.05  

Power listed is the maximum combined conducted output power. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 8zMrlTpAteto85j/4CTrXg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 02/02/2016

Application Dated: 02/02/2016
Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8OM5PAC
Name of Grantee:  Datto, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.384  

Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 8zMrlTpAteto85j/4CTrXg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Datto, Inc.
101 Merritt 7
Norwalk, CT 06851
United States
  Date of Grant: 02/02/2016

Application Dated: 02/02/2016
 
Attention: Benjamin Townsend , Senior Compliance Analyst

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WT8OM5PAC
Name of Grantee:  Datto, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.384  

Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: