FCC ID WUI-LM030008
Microwave sensor module for LED linkable Shoplight
by Winplus Co., Ltd.
Grantee Code: WUI Product Code: LM030008
Latest application date: 2021-03-05
FCC ID Device Details
| FCC ID | WUI-LM030008 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | WUI |
| Product Code | LM030008 |
| Applicant Business | Winplus Co., Ltd. |
| Related Domains |  winplus.net |
| Equipment Class | Microwave sensor module for LED linkable Shoplight |
| Test Firm | TUV SUD Cert & Testing (China) Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5753-5853 MHz | Class II permissive change or modification of presently authorized equipment | 2021-03-05 |
| 5753-5853 MHz | Original Equipment | 2019-12-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2019-12-06 | PDF 716.7 KB |
| Internal Photos | Internal Photos | 2021-03-05 | PDF 1.5 MB |
| Internal Photos | Internal Photos | 2019-12-06 | PDF 939 KB |
| External Photos | External Photos | 2019-12-06 | PDF 270.5 KB |
| Label and Label Location | ID Label/Location Info | 2019-12-06 | PDF 245.4 KB |
| Test Setup Photos | Test Setup Photos | 2021-03-05 | PDF 537.3 KB |
| Test setup photos | Test Setup Photos | 2019-12-06 | PDF 392.1 KB |
| Test Report | Test Report | 2021-03-05 | PDF 837 KB |
| 15C RF test report | Test Report | 2019-12-06 | PDF 623.6 KB |
| FCC Module Approval Attestation Letter | Cover Letter(s) | 2021-03-05 | PDF 79 KB |
| FCC Module Approval Attestation Letter | Cover Letter(s) | 2019-12-06 | PDF 147.6 KB |
| C2PC Justification Letter | Cover Letter(s) | 2021-03-05 | PDF 70 KB |
| FCC Confidentiality Letter | Cover Letter(s) | 2021-03-05 | PDF 64.7 KB |
| FCC Confidentiality Letter | Cover Letter(s) | 2019-12-06 | PDF 115.7 KB |
| RF Exposure Information | RF Exposure Info | 2021-03-05 | PDF 141.9 KB |
| RF Exposure Info | RF Exposure Info | 2019-12-06 | PDF 171.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 82.4 KB | |
| PCB Layout Metadata only | Schematics | PDF 53.2 KB | |
| Schematic Metadata only | Schematics | PDF 63.7 KB | |
| Operational Description Metadata only | Operational Description | PDF 205.9 KB | |
| Operational description Metadata only | Operational Description | PDF 169.5 KB | |
| Part List Metadata only | Parts List/Tune Up Info | PDF 39 KB |
Application Information
| Application ID | T+WsyvV8TADMC1XT7bAsBQ== |
|---|---|
| Final Action Date | 2021-03-05 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018215988 |
| Model | LM030008 |
| Frequency Range | 5753-5853 MHz |
| Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter |
| Device Description | Microwave sensor module for LED linkable Shoplight |
| Responsible Party | Benson H Leung, Director, bensonleung@winplus.net , 852 2798 8932 |
| Test Firm | Harry Zhou, TUV SUD Cert & Testing (China) Co., Ltd., harry.zhou@tuv-sud.cn  , 86 755 3332 3281 |
| TCB Email | allen.ferry@tuvsud.com  |
| TCB Scope | A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC as described in this filing. Limited Modular approval. The device must be installed in the host(s) as specified in the Certification filing. Only those antenna(s) tested with the device or similar antenna(s) with the same type maybe used with this transmitter. If other host types or antennas used would need further evaluation and possible may require the submission of a Class II permissive change application or a new application. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| T+WsyvV8TADMC1XT7bAsBQ== | 2021-03-05 | Class II permissive change or modification of presently authorized equipment |
| rqENzC5PG/HAa10YSKi38A== | 2019-12-06 | Original Equipment |
Equipment Authorization
| Frequency | Rules |
|---|---|
| 5753-5853 MHz | 15C |
Grants
TCB Grant - Application T+WsyvV8TADMC1XT7bAsBQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT UNLIMITED Octagon House, Concorde Way Segensworth North Fareham, PO15 5RL United Kingdom |
Date of Grant: 03/05/2021 Application Dated: 03/03/2021 |
| Winplus Co., Ltd. |
| Suites 6-11, 7th Floor, Corporation Park, 11 On La |
| Shatin, Hong Kong |
| Attention: Benson Leung , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WUI-LM030008 |
| Name of Grantee: | Winplus Co., Ltd. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | Microwave sensor module for LED linkable Shoplight |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 5753.0 - 5853.0 |
| C2PC as described in this filing. Limited Modular approval. The device must be installed in the host(s) as specified in the Certification filing. Only those antenna(s) tested with the device or similar antenna(s) with the same type maybe used with this transmitter. If other host types or antennas used would need further evaluation and possible may require the submission of a Class II permissive change application or a new application. |
EAS Grant - Application T+WsyvV8TADMC1XT7bAsBQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Winplus Co., Ltd. Suites 6-11, 7th Floor, Corporation Park, 11 On La P.O. Box , Shatin, Hong Kong |
Date of Grant: 03/05/2021 Application Dated: 03/03/2021 |
| Attention: Benson Leung , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WUI-LM030008 |
| Name of Grantee: | Winplus Co., Ltd. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | Microwave sensor module for LED linkable Shoplight |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 5753.0 - 5853.0 |
| C2PC as described in this filing. Limited Modular approval. The device must be installed in the host(s) as specified in the Certification filing. Only those antenna(s) tested with the device or similar antenna(s) with the same type maybe used with this transmitter. If other host types or antennas used would need further evaluation and possible may require the submission of a Class II permissive change application or a new application. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 12/06/2019 Application Dated: 12/06/2019 |
| Winplus Co., Ltd. |
| Suites 6-11, 7th Floor, Corporation Park, 11 On La |
| Shatin, Hong Kong |
| Attention: Benson Leung , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WUI-LM030008 |
| Name of Grantee: | Winplus Co., Ltd. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | Microwave sensor module for LED linkable shoplight |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 5753.0 - 5853.0 |
| Limited Modular approval. The device must be installed in the host(s) as specified in the Certification filing. Only those antenna(s) tested with the device or similar antenna(s) with the same type maybe used with this transmitter. If other host types or antennas used would need further evaluation and possible may require the submission of a Class II permissive change application or a new application. |
EAS Grant - Application rqENzC5PG/HAa10YSKi38A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Winplus Co., Ltd. Suites 6-11, 7th Floor, Corporation Park, 11 On La P.O. Box , Shatin, Hong Kong |
Date of Grant: 12/06/2019 Application Dated: 12/06/2019 |
| Attention: Benson Leung , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WUI-LM030008 |
| Name of Grantee: | Winplus Co., Ltd. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | Microwave sensor module for LED linkable shoplight |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 5753.0 - 5853.0 |
| Limited Modular approval. The device must be installed in the host(s) as specified in the Certification filing. Only those antenna(s) tested with the device or similar antenna(s) with the same type maybe used with this transmitter. If other host types or antennas used would need further evaluation and possible may require the submission of a Class II permissive change application or a new application. |
| Mail To: |