FCC ID WUW-WNFQ291BEBT
Qualcomm WiFi 7/BT Combo module
by Viavi Solutions Inc.
Grantee Code: WUW Product Code: WNFQ291BEBT
Latest application date: 2025-12-05
FCC ID Device Details
| FCC ID | WUW-WNFQ291BEBT |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | WUW |
| Product Code | WNFQ291BEBT |
| Applicant Business | Viavi Solutions Inc. 🇺🇸 |
| Related Domains |  viavisolutions.com |
| Equipment Class | Qualcomm WiFi 7/BT Combo module |
| Test Firm | Elite Electronic Engineering Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5865-5885 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-05 |
| 6535-6855 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-05 |
| 2404-2478 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-05 |
| 2412-2472 MHz | Class II permissive change or modification of presently authorized equipment | 2025-12-05 |
| 5865-5885 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ291BEBT Grant Date: 10/28/2024 | 2025-11-24 |
| 2412-2472 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ291BEBT Grant Date: 10/28/2024 | 2025-11-24 |
| 6535-6855 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ291BEBT Grant Date: 10/28/2024 | 2025-11-24 |
| 2404-2478 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ291BEBT Grant Date: 10/28/2024 | 2025-11-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| BENL-WTW-P24060724_R00_SparkLAN_WNFQ-291BEI(BT)_EUT PHOTOS (US) | External Photos | 2025-11-24 | PDF 5.4 MB |
| Label placement on the OneExpert Fiber _ HFC | ID Label/Location Info | 2025-11-24 | PDF 37.1 KB |
| OneExpert Fiber HFC Compliance Label | ID Label/Location Info | 2025-11-24 | PDF 446.8 KB |
| WIFI Module Label | ID Label/Location Info | 2025-11-24 | PDF 228 KB |
| R3410A14057_AD-516AX_ Approval sheet v1.1_signed_20241125 | Test Report | 2025-12-05 | PDF 1.5 MB |
| FCC Covered List Attestation Letter | Attestation Statements | 2025-12-05 | PDF 129.1 KB |
| FCC US Agent Attestation Letter | Attestation Statements | 2025-12-05 | PDF 130.3 KB |
| US Agent of Service of Process | Attestation Statements | 2025-11-24 | PDF 174.4 KB |
| FCC Agency Authorization Letter | Cover Letter(s) | 2025-12-05 | PDF 126.9 KB |
| FCC Certification Class 2 Permissive Change Cover Letter | Cover Letter(s) | 2025-12-05 | PDF 148.1 KB |
| FCC&IC Confidentiality Letter | Cover Letter(s) | 2025-12-05 | PDF 182 KB |
| FCC Change of ID Permission Letter | Cover Letter(s) | 2025-11-24 | PDF 504.1 KB |
| OneExpert SAR FCC Rev B | RF Exposure Info | 2025-12-05 | PDF 4.8 MB |
| Software Operational Description Metadata only | SDR Software/Security Info. | PDF 180.6 KB |
Application Information
| Application ID | rxqwIFv9KIrDMsp7ltQ06g== |
|---|---|
| Final Action Date | 2025-12-05 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018231399 |
| Model | WNFQ291BEBT |
| Frequency Range | 5865-5885 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Qualcomm WiFi 7/BT Combo module |
| Responsible Party | Jaryk Kuzel, Jaryk.Kuzel@ViaviSolutions.com , 2404042571 |
| Technical Contact | Ben Stelle, Viavi Solutions Inc., ben.stelle@viasolutions.com  , 3176148786 |
| Test Firm | Kevin Halpin, Elite Electronic Engineering Inc., khalpin@elitetest.com  , 630-495-9770 |
| TCB Email | reking@elitetest.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rxqwIFv9KIrDMsp7ltQ06g== | 2025-12-05 | Class II permissive change or modification of presently authorized equipment |
| adezsbCNtclzAbhgyVSzBA== | 2025-12-05 | Class II permissive change or modification of presently authorized equipment |
| QeAwJ5WUN7k8LNl9zMS8yQ== | 2025-12-05 | Class II permissive change or modification of presently authorized equipment |
| I+sAt8Nxb/kJwv5AGaSE+g== | 2025-12-05 | Class II permissive change or modification of presently authorized equipment |
| wlGgRAhYMk/J/W65LatcEQ== | 2025-11-24 | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ291BEBT Grant Date: 10/28/2024 |
| snxvtzd5oC0nzRuF/iRh4w== | 2025-11-24 | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ291BEBT Grant Date: 10/28/2024 |
| ZYpgYwF9rNYFeshkFA+W1A== | 2025-11-24 | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ291BEBT Grant Date: 10/28/2024 |
| 6KrW+YRBYr9ABhM62BvjKg== | 2025-11-24 | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ291BEBT Grant Date: 10/28/2024 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 6535-6855 MHz | 0.435 | 15E | CC EP MO |
| 5935-6415 MHz | 0.468 | 15E | CC EP MO |
| 5935-7115 MHz | 0.1 | 15E | CC EP MO |
| 5180-5250 MHz | 0.093 | 15E | CC MO |
| 5250-5320 MHz | 0.09 | 15E | CC MO ND |
| 5500-5720 MHz | 0.095 | 15E | CC MO ND |
| 5745-5825 MHz | 0.09 | 15E | CC MO |
| 5865-5885 MHz | 0.29 | 15E | CC EP MO |
| 5845 MHz | 0.176 | 15E | CC EP MO |
| 5835 MHz | 0.275 | 15E | CC EP MO |
| 5855 MHz | 0.226 | 15E | CC EP MO |
| 5815 MHz | 0.124 | 15E | CC EP MO |
| 2412-2472 MHz | 0.533 | 15C | CC EP MO |
| 2402-2480 MHz | 0.052 | 15C | CC EP MO |
| 2402-2480 MHz | 0.036 | 15C | CC MO |
| 2404-2478 MHz | 0.035 | 15C | CC MO |
Grants
TCB Grant - Application ZYpgYwF9rNYFeshkFA+W1A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 11/24/2025 Application Dated: 09/24/2025 |
| Viavi Solutions Inc. |
| 1445 South Spectrum Boulevard, Suite 102 |
| Chandler, AZ 85286 |
| Attention: Jaryk Kuzel , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WUW-WNFQ291BEBT |
| Name of Grantee: | Viavi Solutions Inc. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.435 | ||
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.468 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.1 |
| CIIPC for this application as described in this filling. CIIPC for this application. This change establishes portable category SAR conditions. The minimum test separation distance is 5mm. The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body SAR, PD and Simultaneous SAR values are 0.74 W/kg, 5.01W/m2 and 1.58 W/kg, respectively. Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum 4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application wlGgRAhYMk/J/W65LatcEQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 11/24/2025 Application Dated: 09/24/2025 |
| Viavi Solutions Inc. |
| 1445 South Spectrum Boulevard, Suite 102 |
| Chandler, AZ 85286 |
| Attention: Jaryk Kuzel , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WUW-WNFQ291BEBT |
| Name of Grantee: | Viavi Solutions Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.093 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.09 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.095 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.09 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.29 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.176 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.275 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.226 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.124 |
| CIIPC for this application. This change establishes portable category SAR conditions. The minimum test separation distance is 5mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.58 W/kg, respectively. Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application snxvtzd5oC0nzRuF/iRh4w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 11/24/2025 Application Dated: 10/01/2025 |
| Viavi Solutions Inc. |
| 1445 South Spectrum Boulevard, Suite 102 |
| Chandler, AZ 85286 |
| Attention: Jaryk Kuzel , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WUW-WNFQ291BEBT |
| Name of Grantee: | Viavi Solutions Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15C | 2412.0 - 2472.0 | 0.533 | ||
| CC EP MO | 15C | 2402.0 - 2480.0 | 0.052 |
| CIIPC for this application. This change establishes portable category SAR conditions. The minimum test separation distance is 5mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 highest reported Body and Simultaneous SAR values are 0.74 W/kg and 1.58 W/kg, respectively. Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application rxqwIFv9KIrDMsp7ltQ06g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 12/05/2025 Application Dated: 11/26/2025 |
| Viavi Solutions Inc. |
| 1445 South Spectrum Boulevard, Suite 102 |
| Chandler, AZ 85286 |
| Attention: Jaryk Kuzel , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WUW-WNFQ291BEBT |
| Name of Grantee: | Viavi Solutions Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.093 | ||
| CC MO ND | 15E | 5250.0 - 5320.0 | 0.09 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.095 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.09 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.29 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.176 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.275 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.226 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.124 |
| This change establishes portable category SAR conditions. The minimum test separation distance is 5mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.58 W/kg, respectively. Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s)tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. This is a CIIPC to establish a portable category when placed in this OneExpert Fiber/HFC hostdevice. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application QeAwJ5WUN7k8LNl9zMS8yQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 12/05/2025 Application Dated: 11/24/2025 |
| Viavi Solutions Inc. |
| 1445 South Spectrum Boulevard, Suite 102 |
| Chandler, AZ 85286 |
| Attention: Jaryk Kuzel , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WUW-WNFQ291BEBT |
| Name of Grantee: | Viavi Solutions Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| Single Modular Approval. Power Output is Conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF Exposure compliance. This filing meets the SAR threshold exclusion set forth in KDB 447498 and therefore can be used in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. This is a CIIPC to establish a portable category when placed in this OneExpert Fiber/HFC host device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application I+sAt8Nxb/kJwv5AGaSE+g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 12/05/2025 Application Dated: 11/24/2025 |
| Viavi Solutions Inc. |
| 1445 South Spectrum Boulevard, Suite 102 |
| Chandler, AZ 85286 |
| Attention: Jaryk Kuzel , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WUW-WNFQ291BEBT |
| Name of Grantee: | Viavi Solutions Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15C | 2412.0 - 2472.0 | 0.533 | ||
| CC EP MO | 15C | 2402.0 - 2480.0 | 0.052 |
| Single modular approval. Power Output is Conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF Exposure compliance. This filing meets the SAR threshold exclusion set forth in KDB 447498 and therefore can be used in mobile/portable configurations. This is a CIIPC to establish a portable category when placed in this OneExpert Fiber/HFC host device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application adezsbCNtclzAbhgyVSzBA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 12/05/2025 Application Dated: 11/26/2025 |
| Viavi Solutions Inc. |
| 1445 South Spectrum Boulevard, Suite 102 |
| Chandler, AZ 85286 |
| Attention: Jaryk Kuzel , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WUW-WNFQ291BEBT |
| Name of Grantee: | Viavi Solutions Inc. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.435 | ||
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.468 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.1 |
| This change establishes portable category SAR conditions. The minimum test separation distance is 5mm.The PIFA antenna Brand: HONGBO / Model: 260-25083 highest reported Body SAR, PD and Simultaneous SAR values are 0.74 W/kg, 5.01W/m2 and 1.58 W/kg, respectively. Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has20 MHz, 40 MHz, 80 MHz, 160 MHz and 320 MHz bandwidth modes. For 5.925-7.125GHz band operation, the PIFA antenna (Maximum 5.16 dBi gain) and Monopole antenna (Maximum4.81 dBi gain) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. This is a CIIPC to establish a portable category when placed in this OneExpert Fiber/HFC host device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application 6KrW+YRBYr9ABhM62BvjKg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 11/24/2025 Application Dated: 09/24/2025 |
| Viavi Solutions Inc. |
| 1445 South Spectrum Boulevard, Suite 102 |
| Chandler, AZ 85286 |
| Attention: Jaryk Kuzel , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | WUW-WNFQ291BEBT |
| Name of Grantee: | Viavi Solutions Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Qualcomm WiFi 7/BT Combo module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.036 | ||
| CC MO | 15C | 2404.0 - 2478.0 | 0.035 |
| CIIPC for this application. This change establishes portable category SAR conditions. The minimum test separation distance is 5mm. The PIFA antenna Brand: HONGBO / Model: 260-25094 highest reported Body and Simultaneous SAR values are 0.74 W/kg and 1.58 W/kg, respectively. Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |