FCC ID WYK-ES2440

Quad radio access point/bridge. It provides secure connectivity through multiple Ethernet ports and four 802.11 a/b/g/n radios in a ruggedized enclosure. It provides secure, fixed and mobile communications for harsh environments.

by Fortress Technologies, Inc.

Grantee Code: WYK   Product Code: ES2440
Latest application date: 2012-10-23

FCC ID Device Details

FCC IDWYK-ES2440
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeWYK
Product CodeES2440
Applicant BusinessFortress Technologies, Inc. 🇺🇸
Related Domains fortresstech.com metlabs.com
Equipment ClassQuad radio access point/bridge. It provides secure connectivity through multiple Ethernet ports and four 802.11 a/b/g/n radios in a ruggedized enclosure. It provides secure, fixed and mobile communications for harsh environments.
Test FirmMET Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5260-5320 MHzClass II permissive change or modification of presently authorized equipment2012-10-23
2412-2462 MHzOriginal Equipment2012-03-08
5745-5805 MHzOriginal Equipment2012-03-08

Exhibits

DocumentTypeAvailableFile
Marketing LiteratureUsers Manual2012-03-08PDF 2.7 MB
User ManualUsers Manual2012-03-08PDF 273.1 KB
Internal PhotosInternal Photos2012-03-08PDF 1.9 MB
External PhotosExternal Photos2012-03-08PDF 412.1 KB
LabelID Label/Location Info2012-03-08PDF 320.1 KB
Test Setup PhotosTest Setup Photos2012-10-23PDF 144.3 KB
Test Setup PhotosTest Setup Photos2012-03-08PDF 123.9 KB
Test Setup PhotosTest Setup Photos2012-03-08PDF 123.9 KB
Test Report ATest Report2012-10-23PDF 5.5 MB
Test Report BTest Report2012-10-23PDF 5.3 MB
Test Report ATest Report2012-03-08PDF 2.9 MB
Test Report A - Part 1Test Report2012-03-08PDF 3.4 MB
Test Report A - Part 2Test Report2012-03-08PDF 3.3 MB
Test Report BTest Report2012-03-08PDF 3.6 MB
Test Report BTest Report2012-03-08PDF 2.8 MB
Class II Permissive Change LetterCover Letter(s)2012-10-23PDF 10.8 KB
Confidentiality RequestCover Letter(s)2012-03-08PDF 40.9 KB
MPE ARF Exposure Info2012-10-23PDF 279.4 KB
MPE BRF Exposure Info2012-10-23PDF 279.4 KB
Antenna Datasheet - 2.4 GHz OmniRF Exposure Info2012-03-08PDF 1.2 MB
Antenna Datasheet - 2.7 GHz SectorRF Exposure Info2012-03-08PDF 62.1 KB
Antenna Datasheet - 5 GHz OmniRF Exposure Info2012-03-08PDF 1.2 MB
Antenna Datasheet - 5.9 GHz SectorRF Exposure Info2012-03-08PDF 51.5 KB
MPE ARF Exposure Info2012-03-08PDF 279.7 KB
MPE ARF Exposure Info2012-03-08PDF 283.7 KB
MPE BRF Exposure Info2012-03-08PDF 76.8 KB
MPE BRF Exposure Info2012-03-08PDF 280.2 KB

Application Information

Application IDOrysQPgR7xXMQszPX9oK8g==
Final Action Date2012-10-23
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019958503
Model-ES2440
Frequency Range5260-5320 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionQuad radio access point/bridge. It provides secure connectivity through multiple Ethernet ports and four 802.11 a/b/g/n radios in a ruggedized enclosure. It provides secure, fixed and mobile communications for harsh environments.
Responsible PartyJohn Pacheco, jpacheco@fortresstech.com , 978.923.6409
Technical ContactJeff Pratt, MET Laboratories, tcbinfo@metlabs.com , 410-354-3300
Non-Technical ContactJennifer Warnell, MET Laboratories, tcbinfo@metlabs.com , 410-354-3300
Test FirmJon Fuhrman, MET Laboratories, Inc., jfuhrman@metlabs.com , 4109491880
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is conducted. This device has 20 MHz and 40 MHz BW modes. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
OrysQPgR7xXMQszPX9oK8g==2012-10-23Class II permissive change or modification of presently authorized equipment
IqTy2QYeugwg/E7l3i0Eeg==2012-03-08Original Equipment
++Iek8lqOz6Oi71QhOGywQ==2012-03-08Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.02915CCC
2412-2462 MHz0.26915CCC, MO
2422-2452 MHz0.23715CCC, MO
5260-5320 MHz0.09815E
5500-5580 MHz0.08115E
5660-5700 MHz0.08115E
5745-5805 MHz0.05115ECC
5745-5825 MHz0.34615CCC
5745-5805 MHz0.06215ECC, MO
5745-5825 MHz0.38815CCC, MO
5755-5795 MHz0.05215ECC, MO
5755-5815 MHz0.36815CCC, MO

Grants

TCB Grant - Application OrysQPgR7xXMQszPX9oK8g==

This application does not exist.

EAS Grant - Application OrysQPgR7xXMQszPX9oK8g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fortress Technologies, Inc.
1 Technology Park Drive
Westford, MA 01886
United States
  Date of Grant: 10/23/2012

Application Dated: 03/20/2012
 
Attention: John Pacheco

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WYK-ES2440
Name of Grantee:  Fortress Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Quad radio access point/bridge. It provides secure connectivity through multiple Ethernet ports and four 802.11 a/b/g/n radios in a ruggedized enclosure. It provides secure, fixed and mobile communications for harsh environments.
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5260.0  -  5320.0 0.098  
15E 5500.0  -  5580.0 0.081  
15E 5660.0  -  5700.0 0.081  

Output power is conducted. This device has 20 MHz and 40 MHz BW modes. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application IqTy2QYeugwg/E7l3i0Eeg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 03/08/2012

Application Dated: 03/08/2012
Fortress Technologies, Inc.
1 Technology Park Drive
Westford, MA 01886
 
Attention: John Pacheco

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WYK-ES2440
Name of Grantee:  Fortress Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: Quad radio access point/bridge
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 5745.0  -  5825.0 0.346  
CC MO 15C 5745.0  -  5825.0 0.388  
CC MO 15C 5755.0  -  5815.0 0.368  
CC 15C 2412.0  -  2462.0 0.029  
CC MO 15C 2412.0  -  2462.0 0.269  
CC MO 15C 2422.0  -  2452.0 0.237  

Power Output listed is aggregate conducted for operation in MIMO mode and conducted for legacy. Device is an access point/bridge operating in 2x2 MIMO mode and supports single-stream legacy modes as described in this composite filing. Professional installation is required. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 20cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) or similar tested in this filing may be used with the transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application IqTy2QYeugwg/E7l3i0Eeg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fortress Technologies, Inc.
1 Technology Park Drive
Westford, MA 01886
United States
  Date of Grant: 03/08/2012

Application Dated: 03/08/2012
 
Attention: John Pacheco

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WYK-ES2440
Name of Grantee:  Fortress Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: Quad radio access point/bridge
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 5745.0  -  5825.0 0.346  
CC MO 15C 5745.0  -  5825.0 0.388  
CC MO 15C 5755.0  -  5815.0 0.368  
CC 15C 2412.0  -  2462.0 0.029  
CC MO 15C 2412.0  -  2462.0 0.269  
CC MO 15C 2422.0  -  2452.0 0.237  

Power Output listed is aggregate conducted for operation in MIMO mode and conducted for legacy. Device is an access point/bridge operating in 2x2 MIMO mode and supports single-stream legacy modes as described in this composite filing. Professional installation is required. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 20cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) or similar tested in this filing may be used with the transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ++Iek8lqOz6Oi71QhOGywQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 03/08/2012

Application Dated: 03/08/2012
Fortress Technologies, Inc.
1 Technology Park Drive
Westford, MA 01886
 
Attention: John Pacheco

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WYK-ES2440
Name of Grantee:  Fortress Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Quad radio access point/bridge
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5745.0  -  5805.0 0.051  
CC MO 15E 5745.0  -  5805.0 0.062  
CC MO 15E 5755.0  -  5795.0 0.052  

Power Output listed is aggregate conducted for operation in MIMO mode and conducted for legacy. Device is an access point/bridge operating in 2x2 MIMO mode and supports single-stream legacy modes as described in this composite filing. Professional installation is required. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 20cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) or similar tested in this filing may be used with the transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ++Iek8lqOz6Oi71QhOGywQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fortress Technologies, Inc.
1 Technology Park Drive
Westford, MA 01886
United States
  Date of Grant: 03/08/2012

Application Dated: 03/08/2012
 
Attention: John Pacheco

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WYK-ES2440
Name of Grantee:  Fortress Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Quad radio access point/bridge
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5745.0  -  5805.0 0.051  
CC MO 15E 5745.0  -  5805.0 0.062  
CC MO 15E 5755.0  -  5795.0 0.052  

Power Output listed is aggregate conducted for operation in MIMO mode and conducted for legacy. Device is an access point/bridge operating in 2x2 MIMO mode and supports single-stream legacy modes as described in this composite filing. Professional installation is required. The antenna(s) used with this transmitter must be professionally installed and provide a minimum of 20cm separation from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Only those antenna(s) or similar tested in this filing may be used with the transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: