FCC ID X3XVPR-1

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460

Date of Grant: 02/29/2012 Application Dated: 02/29/2012

ELMO COMPANY, LIMITED

6-14 Meizen-cho Mizuho-ku

Nagoya-city Aichi, 467-8567 Japan

Attention: Katsuaki Shimizu , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	X3XVPR-1
Name of Grantee:	ELMO COMPANY, LIMITED
Equipment Class:	Digital Transmission System
Notes:	VP Receiver

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
19 20 CC	15C	5745.0  -  5805.0	0.151

Output power listed is conducted. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

19:	This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

ELMO COMPANY, LIMITED 6-14 Meizen-cho Mizuho-ku Nagoya-city Aichi, 467-8567 Japan

Date of Grant: 02/29/2012 Application Dated: 02/29/2012

Attention: Katsuaki Shimizu , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	X3XVPR-1
Name of Grantee:	ELMO COMPANY, LIMITED
Equipment Class:	Digital Transmission System
Notes:	VP Receiver
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
19 20 CC	15C	5745.0  -  5805.0	0.151

Output power listed is conducted. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

19:	This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application PeiiH2UyVQUFGbDo6OauTg==

EAS Grant - Application PeiiH2UyVQUFGbDo6OauTg==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

ELMO COMPANY, LIMITED 1-3-4, Shioya-cho, Minami-ku, Nagoya-city Aichi, 457-0078 Japan

Date of Grant: 04/19/2013 Application Dated: 09/13/2012

Attention: Tomokazu Ito , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	X3XVPR-1
Name of Grantee:	ELMO COMPANY, LIMITED
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	VP Receiver
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
19 20 CC	15E	5180.0  -  5240.0	0.026
19 20 CC ND	15E	5260.0  -  5320.0	0.026
19 20 CC ND	15E	5500.0  -  5580.0	0.027
19 20 CC ND	15E	5660.0  -  5700.0	0.027

Output power is conducted. This device only has 40 MHz BW mode. Operation in 5.15-5.25 GHz band is for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

19:	This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 8hbXAC82TzzFbMJOc6rX9w==

Mail To:

Celine Chou,

Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang

Taoyuan Hsien, 333

Taiwan

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460

Date of Grant: 02/29/2012 Application Dated: 02/29/2012

ELMO COMPANY, LIMITED

6-14 Meizen-cho Mizuho-ku

Nagoya-city Aichi, 467-8567 Japan

Attention: Katsuaki Shimizu , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	X3XVPR-1
Name of Grantee:	ELMO COMPANY, LIMITED
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	VP Receiver

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
19 20 CC	15E	5180.0  -  5240.0	0.026

Output power listed is conducted. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

19:	This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

ELMO COMPANY, LIMITED 6-14 Meizen-cho Mizuho-ku Nagoya-city Aichi, 467-8567 Japan

Date of Grant: 02/29/2012 Application Dated: 02/29/2012

Attention: Katsuaki Shimizu , Senior Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	X3XVPR-1
Name of Grantee:	ELMO COMPANY, LIMITED
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	VP Receiver
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
19 20 CC	15E	5180.0  -  5240.0	0.026

Output power listed is conducted. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

19:	This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To: