1. FCC ID
  2. X4K
  3. X4K-HUB100BSM02

FCC ID X4K-HUB100BSM02

2.4 GHz WiFi Module

by Automatic Technology (Australia) Pty. Ltd.

Grantee Code: X4K   Product Code: HUB100BSM02
Latest application date: 2019-01-02

FCC ID Device Details

FCC IDX4K-HUB100BSM02
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeX4K
Product CodeHUB100BSM02
Applicant BusinessAutomatic Technology (Australia) Pty. Ltd. 🇦🇺
Related Domains ata-aust.com.au uttlab.com
Equipment Class2.4 GHz WiFi Module
Test FirmShenzhen UnionTrust Quality and Technology Co., Lt

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2019-01-02

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-01-02PDF 1.3 MB
Internal PhotosInternal Photos2019-01-02PDF 1.2 MB
External PhotosExternal Photos2019-01-02PDF 1.2 MB
Label Artwork and LocationID Label/Location Info2019-01-02PDF 331.6 KB
Test Setup PhotoTest Setup Photos2019-01-02PDF 518 KB
Test ReportTest Report2019-01-02PDF 4.8 MB
Confidentiality RequestCover Letter(s)2019-01-02PDF 73 KB
Letter of AgencyCover Letter(s)2019-01-02PDF 120.6 KB
MPERF Exposure Info2019-01-02PDF 1.5 MB
Block Diagram Metadata onlyBlock DiagramPDF 120.2 KB
Circuit Diagram Metadata onlySchematicsPDF 406.9 KB
Technical Description Metadata onlyOperational DescriptionPDF 408.1 KB

Application Information

Application IDu2u5yH9oNWg14eFdslRBIA==
Final Action Date2019-01-02
Application PurposeOriginal Equipment
Applicant FRN0019477462
ModelHUB100BSM02
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description2.4 GHz WiFi Module
Responsible PartyNikolai Klepikov, Mr., nikolai.klepikov@ata-aust.com.au , +61397910200
AgentBilly Billy Billy, Shenzhen UnionTrust Quality and Technology Co., Lt
Technical ContactBilly Li, Shenzhen UnionTrust Quality and Technology Co., Lt, billy.li@uttlab.com , 0755-28230888
Non-Technical ContactBilly Li, Shenzhen UnionTrust Quality and Technology Co., Lt, billy.li@uttlab.com , 0755-28230888
Test FirmGeorge Luo, Shenzhen UnionTrust Quality and Technology Co., Lt, quality@uttlab.com , +86-755-28230888
TCB EmailTCB_Admin@intertek.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
u2u5yH9oNWg14eFdslRBIA==2019-01-02Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.216300015C

Grants

TCB Grant - Application u2u5yH9oNWg14eFdslRBIA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
 Date of Grant: 01/02/2019

Application Dated: 01/02/2019
Automatic Technology (Australia) Pty. Ltd.
6-8 Fiveways Boulevard
Keysborough, 3173
Australia
 
Attention: Nikolai Klepikov , Mr.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  X4K-HUB100BSM02
Name of Grantee:  Automatic Technology (Australia) Pty. Ltd.
Equipment Class: Digital Transmission System
Notes: 2.4 GHz WiFi Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.2163  

Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.

EAS Grant - Application u2u5yH9oNWg14eFdslRBIA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Automatic Technology (Australia) Pty. Ltd.
6-8 Fiveways Boulevard P.O. Box ,
Keysborough, 3173
Australia 		  Date of Grant: 01/02/2019

Application Dated: 01/02/2019
 
Attention: Nikolai Klepikov , Mr.

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  X4K-HUB100BSM02
Name of Grantee:  Automatic Technology (Australia) Pty. Ltd.
Equipment Class: Digital Transmission System
Notes: 2.4 GHz WiFi Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.2163  

Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes.



Mail To: