FCC ID X4K-HUB1F89BSM02
Wireless Smart Hub
by Automatic Technology (Australia) Pty. Ltd.
Grantee Code: X4K Product Code: HUB1F89BSM02
Latest application date: 2019-06-14
FCC ID Device Details
| FCC ID | X4K-HUB1F89BSM02 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | X4K |
| Product Code | HUB1F89BSM02 |
| Applicant Business | Automatic Technology (Australia) Pty. Ltd. 🇦🇺 |
| Related Domains |  ata-aust.com.au |
| Equipment Class | Wireless Smart Hub |
| Test Firm | EMC Technologies Pty. Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 912.5-926.9 MHz | Original Equipment | 2019-06-14 |
| 2412-2462 MHz | Original Equipment | 2019-06-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2019-06-14 | PDF 1.1 MB |
| Internal Photos 2.4GHz | Internal Photos | 2019-06-14 | PDF 1.8 MB |
| Internal Photos 902-928 MHz | Internal Photos | 2019-06-14 | PDF 319.6 KB |
| External Photos | External Photos | 2019-06-14 | PDF 1.3 MB |
| Label | ID Label/Location Info | 2019-06-14 | PDF 362.8 KB |
| Test Setup Photos | Test Setup Photos | 2019-06-14 | PDF 518 KB |
| Test Setup Photos DSS | Test Setup Photos | 2019-06-14 | PDF 2.3 MB |
| SpotCheck Report 2.4GHz WiFi | Test Report | 2019-06-14 | PDF 904.7 KB |
| Test Report 2.4GHz WiFi Metadata only | Test Report | 2019-06-14 | PDF 904.7 KB |
| Test Report DSS | Test Report | 2019-06-14 | PDF 5.7 MB |
| Test Report Part 1 | Test Report | 2019-06-14 | PDF 4.8 MB |
| Test Report Part 2 | Test Report | 2019-06-14 | PDF 3.2 MB |
| Composite Application Using Original DTS Report | Cover Letter(s) | 2019-06-14 | PDF 40.5 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2019-06-14 | PDF 118.5 KB |
| POA | Cover Letter(s) | 2019-06-14 | PDF 70.5 KB |
| MPE Report | RF Exposure Info | 2019-06-14 | PDF 1.5 MB |
| RF Exposure Assessment | RF Exposure Info | 2019-06-14 | PDF 253.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 32 KB | |
| Schematics Metadata only | Schematics | PDF 27.2 KB | |
| Op Desc DSS Filing Req for 902-928 MHz FHSS Metadata only | Operational Description | PDF 487.1 KB | |
| Operational Description Metadata only | Operational Description | PDF 395.4 KB |
Application Information
| Application ID | sfbkNwRrLmBpE2G5tj7e/A== |
|---|---|
| Final Action Date | 2019-06-14 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0019477462 |
| Model | HUB1F89BSM02 |
| Frequency Range | 912.5-926.9 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wireless Smart Hub |
| Responsible Party | Nikolai Klepikov, Mr., nikolai.klepikov@ata-aust.com.au , +61397910200 |
| Test Firm | Chris Zombolas, EMC Technologies Pty. Ltd., chris@emctech.com.au  , 61393651000 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| sfbkNwRrLmBpE2G5tj7e/A== | 2019-06-14 | Original Equipment |
| bu5eP81/tQ6rOd5C03NZng== | 2019-06-14 | Original Equipment |
Grants
TCB Grant - Application sfbkNwRrLmBpE2G5tj7e/A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/14/2019 Application Dated: 06/14/2019 |
| Automatic Technology (Australia) Pty. Ltd. |
| 6-8 Fiveways Boulevard |
| Keysborough, 3173 Australia |
| Attention: Nikolai Klepikov , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X4K-HUB1F89BSM02 |
| Name of Grantee: | Automatic Technology (Australia) Pty. Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Smart Hub |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 912.5 - 926.9 | 0.1 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application sfbkNwRrLmBpE2G5tj7e/A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Automatic Technology (Australia) Pty. Ltd. 6-8 Fiveways Boulevard P.O. Box , Keysborough, 3173 Australia |
Date of Grant: 06/14/2019 Application Dated: 06/14/2019 |
| Attention: Nikolai Klepikov , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X4K-HUB1F89BSM02 |
| Name of Grantee: | Automatic Technology (Australia) Pty. Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Smart Hub |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 912.5 - 926.9 | 0.1 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/14/2019 Application Dated: 06/14/2019 |
| Automatic Technology (Australia) Pty. Ltd. |
| 6-8 Fiveways Boulevard |
| Keysborough, 3173 Australia |
| Attention: Nikolai Klepikov , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X4K-HUB1F89BSM02 |
| Name of Grantee: | Automatic Technology (Australia) Pty. Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Smart Hub |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2163 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application bu5eP81/tQ6rOd5C03NZng==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Automatic Technology (Australia) Pty. Ltd. 6-8 Fiveways Boulevard P.O. Box , Keysborough, 3173 Australia |
Date of Grant: 06/14/2019 Application Dated: 06/14/2019 |
| Attention: Nikolai Klepikov , Mr. |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X4K-HUB1F89BSM02 |
| Name of Grantee: | Automatic Technology (Australia) Pty. Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Smart Hub |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2163 |
| Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |