FCC ID X6O-BT01
communication module BT01
by Dräger Safety AG & Co. KGaA
Grantee Code: X6O Product Code: BT01
Latest application date: 2026-01-20
FCC ID Device Details
| FCC ID | X6O-BT01 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | X6O |
| Product Code | BT01 |
| Applicant Business | Dräger Safety AG & Co. KGaA 🇩🇪 |
| Related Domains |  draeger.com |
| Equipment Class | communication module BT01 |
| Test Firm | Kiwa Nederland B.V. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2026-01-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-02-07 |
| 2402-2480 MHz | Original Equipment | 2021-08-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2026-01-20 | PDF 1.1 MB |
| Users Manual Metadata only | Users Manual | 2021-08-17 | PDF 878.2 KB |
| Users Manual_revised0812 | Users Manual | 2021-08-17 | PDF 879.6 KB |
| Internal Photos | Internal Photos | 2025-02-07 | PDF 390.5 KB |
| Internal Photos | Internal Photos | 2021-08-17 | PDF 269.2 KB |
| External Photos | External Photos | 2021-08-17 | PDF 269.2 KB |
| ID Label/Location Info | ID Label/Location Info | 2021-08-17 | PDF 56.8 KB |
| Test Setup Photos | Test Setup Photos | 2025-02-07 | PDF 682.2 KB |
| Test Setup Photos | Test Setup Photos | 2021-08-17 | PDF 661.3 KB |
| Test Report | Test Report | 2025-02-07 | PDF 918.1 KB |
| Test Report | Test Report | 2021-08-17 | PDF 4.3 MB |
| Attestation Statements | Attestation Statements | 2026-01-20 | PDF 1.4 MB |
| US Agent Letter | Attestation Statements | 2026-01-20 | PDF 1.4 MB |
| Attestation Statements | Attestation Statements | 2025-02-07 | PDF 2.1 MB |
| US Agent Letter | Attestation Statements | 2025-02-07 | PDF 687.3 KB |
| FCC Class II permissive change letter | Cover Letter(s) | 2026-01-20 | PDF 688.5 KB |
| C2PC Letter | Cover Letter(s) | 2025-02-07 | PDF 838.2 KB |
| Confidentiality | Cover Letter(s) | 2025-02-07 | PDF 1.1 MB |
| Confidentiality | Cover Letter(s) | 2021-08-17 | PDF 406.8 KB |
| Modular Approval Request | Cover Letter(s) | 2021-08-17 | PDF 1,003.9 KB |
| MPE | RF Exposure Info | 2026-01-20 | PDF 248.4 KB |
| RF Exposure Info. | RF Exposure Info | 2025-02-07 | PDF 197.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 202.4 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 65.9 KB | |
| Schematics Metadata only | Schematics | PDF 80.3 KB | |
| Operational Description Metadata only | Operational Description | PDF 1.3 MB | |
| Operational Description Metadata only | Operational Description | PDF 878.2 KB | |
| Operational Description _revised0812 Metadata only | Operational Description | PDF 879.6 KB |
Application Information
| Application ID | eaCZBpkUxWsNsk/TDnr14A== |
|---|---|
| Final Action Date | 2026-01-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019565589 |
| Model | BT01 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | communication module BT01 |
| Responsible Party | Lutz Rueffert, lutz.rueffert@draeger.com , +494518821623 |
| Non-Technical Contact | Ronald Lacewell, Draeger, Inc., ronald.lacewell@draeger.com , +1-281-382-4823 |
| Test Firm | Willem Jong, Kiwa Nederland B.V., dl_radio-certification@kiwa.com  , +31 88 9983393 |
| TCB Email | dl_radio-certification@kiwa.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| eaCZBpkUxWsNsk/TDnr14A== | 2026-01-20 | Class II permissive change or modification of presently authorized equipment |
| Ua7rMo708ALyXYtYDaOPyA== | 2025-02-07 | Class II permissive change or modification of presently authorized equipment |
| n2+b4IZ55fcuhlqLatKl2Q== | 2021-08-17 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0050000 | 15C |
Grants
TCB Grant - Application Ua7rMo708ALyXYtYDaOPyA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/07/2025 Application Dated: 02/04/2025 |
| Dräger Safety AG & Co. KGaA |
| Revalstrasse 1 |
| Luebeck, 23560 Germany |
| Attention: Lutz Rueffert , Approval Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X6O-BT01 |
| Name of Grantee: | Dräger Safety AG & Co. KGaA |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication module BT01 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 |
| C2PC: Firmware update. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application Ua7rMo708ALyXYtYDaOPyA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dräger Safety AG & Co. KGaA Revalstrasse 1 Luebeck, 23560 Germany |
Date of Grant: 02/07/2025 Application Dated: 02/04/2025 |
| Attention: Lutz Rueffert , Approval Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X6O-BT01 |
| Name of Grantee: | Dräger Safety AG & Co. KGaA |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication module BT01 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 |
| C2PC: Firmware update. Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 08/17/2021 Application Dated: 08/10/2021 |
| Dräger Safety AG & Co. KGaA |
| Revalstrasse 1 |
| Luebeck, 23560 Germany |
| Attention: Lutz Rueffert , Approval Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X6O-BT01 |
| Name of Grantee: | Dräger Safety AG & Co. KGaA |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication module BT01 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 |
| Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application n2+b4IZ55fcuhlqLatKl2Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dräger Safety AG & Co. KGaA Revalstrasse 1 Luebeck, 23560 Germany |
Date of Grant: 08/17/2021 Application Dated: 08/10/2021 |
| Attention: Lutz Rueffert , Approval Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X6O-BT01 |
| Name of Grantee: | Dräger Safety AG & Co. KGaA |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication module BT01 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 |
| Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 01/20/2026 Application Dated: 01/15/2026 |
| Dräger Safety AG & Co. KGaA |
| Revalstrasse 1 |
| Luebeck, 23560 Germany |
| Attention: Lutz Rueffert , Approval Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X6O-BT01 |
| Name of Grantee: | Dräger Safety AG & Co. KGaA |
| Equipment Class: | Digital Transmission System |
| Notes: | communication module BT01 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 |
| C2PC: Adding RF exposure distance.
Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. To comply with RF exposure conditions the host device incorporating the BT01 must ensure a separation distance with at least of 6.5436 mm measured between the Antenna and outside of the housing. |