FCC ID X6W-VSN300S
WiFi radio module
by POWER-ONE ITALY SPA
Grantee Code: X6W Product Code: VSN300S
Latest application date: 2019-01-31
FCC ID Device Details
| FCC ID | X6W-VSN300S |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | X6W |
| Product Code | VSN300S |
| Applicant Business | POWER-ONE ITALY SPA 🇮🇹 |
| Related Domains |  power-one.com |
| Equipment Class | WiFi radio module |
| Test Firm | TUV Rheinland Italia SRL |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2019-01-31 |
| 2412-2462 MHz | Original Equipment | 2018-04-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2018-04-18 | PDF 70.7 KB |
| Internal Photos | Internal Photos | 2019-01-31 | PDF 268.3 KB |
| Internal Photos | Internal Photos | 2018-04-18 | PDF 451.5 KB |
| External Photos | External Photos | 2019-01-31 | PDF 268.3 KB |
| External Photos | External Photos | 2018-04-18 | PDF 1.9 MB |
| ID Label and Location Info | ID Label/Location Info | 2018-04-18 | PDF 2.2 MB |
| Test Setup Photos | Test Setup Photos | 2019-01-31 | PDF 992.7 KB |
| Test Setup photos | Test Setup Photos | 2018-04-18 | PDF 201.6 KB |
| Test Report | Test Report | 2019-01-31 | PDF 662.2 KB |
| Test Report | Test Report | 2018-04-18 | PDF 4.1 MB |
| Agency Letter | Cover Letter(s) | 2019-01-31 | PDF 574.6 KB |
| Class 2 Permissive Change Letter | Cover Letter(s) | 2019-01-31 | PDF 54.8 KB |
| Confidentiality Letter | Cover Letter(s) | 2019-01-31 | PDF 72.6 KB |
| Modular Approval Request Letter | Cover Letter(s) | 2018-04-18 | PDF 94.4 KB |
| Statement of Wi-Fi channel using | Cover Letter(s) | 2018-04-18 | PDF 34.8 KB |
| RF Exposure Info | RF Exposure Info | 2018-04-18 | PDF 331.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 469.4 KB | |
| Schematics Metadata only | Schematics | PDF 530.6 KB | |
| Schematics Metadata only | Schematics | PDF 324.7 KB | |
| Operational Description Metadata only | Operational Description | PDF 30.8 KB | |
| Operational Description_Antenna Info Metadata only | Operational Description | PDF 2 MB |
Application Information
| Application ID | +fgCM+G5hqSADNkmtQnT4w== |
|---|---|
| Final Action Date | 2019-01-31 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019591106 |
| Model | VSN300S |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WiFi radio module |
| Responsible Party | GIANFRANCO IANNUZZI, TEST HOUSES LIAISON ENGINEER, gianfranco.iannuzzi@power-one.com , +39 055-9195 |
| Test Firm | Giovanni Molteni, TUV Rheinland Italia SRL, giovanni.molteni@it.tuv.com  , 39-2-9396871 |
| TCB Email | fcb@us.tuv.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change. Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. Only the antenna tested with the device or similar antenna with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz and 40 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| +fgCM+G5hqSADNkmtQnT4w== | 2019-01-31 | Class II permissive change or modification of presently authorized equipment |
| c3MpVcibsyrVzbbJiNn7Lg== | 2018-04-18 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0457000 | 15C |
Grants
TCB Grant - Application c3MpVcibsyrVzbbJiNn7Lg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 04/18/2018 Application Dated: 04/12/2018 |
| POWER-ONE ITALY SPA |
| VIA SAN GIORGIO 642 |
| TERRANUOVA BRACCIOLINI, 52028 Italy |
| Attention: GIANFRANCO IANNUZZI , TEST HOUSES LIAISON ENGINEER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X6W-VSN300S |
| Name of Grantee: | POWER-ONE ITALY SPA |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0457 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. Only the antenna tested with the device or similar antenna with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz and 40 MHz bandwidth modes. |
EAS Grant - Application c3MpVcibsyrVzbbJiNn7Lg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
POWER-ONE ITALY SPA VIA SAN GIORGIO 642 P.O. Box , TERRANUOVA BRACCIOLINI, 52028 Italy |
Date of Grant: 04/18/2018 Application Dated: 04/12/2018 |
| Attention: GIANFRANCO IANNUZZI , TEST HOUSES LIAISON ENGINEER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X6W-VSN300S |
| Name of Grantee: | POWER-ONE ITALY SPA |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0457 |
| Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. Only the antenna tested with the device or similar antenna with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz and 40 MHz bandwidth modes. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 01/31/2019 Application Dated: 01/29/2019 |
| POWER-ONE ITALY SPA |
| VIA SAN GIORGIO 642 |
| TERRANUOVA BRACCIOLINI, 52028 Italy |
| Attention: GIANFRANCO IANNUZZI , TEST HOUSES LIAISON ENGINEER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X6W-VSN300S |
| Name of Grantee: | POWER-ONE ITALY SPA |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi radio module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0457 |
| Class II Permissive Change. Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. Only the antenna tested with the device or similar antenna with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz and 40 MHz bandwidth modes. |
EAS Grant - Application +fgCM+G5hqSADNkmtQnT4w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
POWER-ONE ITALY SPA VIA SAN GIORGIO 642 P.O. Box , TERRANUOVA BRACCIOLINI, 52028 Italy |
Date of Grant: 01/31/2019 Application Dated: 01/29/2019 |
| Attention: GIANFRANCO IANNUZZI , TEST HOUSES LIAISON ENGINEER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X6W-VSN300S |
| Name of Grantee: | POWER-ONE ITALY SPA |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi radio module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0457 |
| Class II Permissive Change. Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. Only the antenna tested with the device or similar antenna with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz and 40 MHz bandwidth modes. |
| Mail To: |