FCC ID XCO-QCC3008

Bluetooth Module

by Hansong(Nanjing) Technology Ltd.

Grantee Code: XCO   Product Code: QCC3008
Latest application date: 2020-08-26

FCC ID Device Details

FCC IDXCO-QCC3008
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXCO
Product CodeQCC3008
Applicant BusinessHansong(Nanjing) Technology Ltd. 🇨🇳
Related Domains hansong-china.com
Equipment ClassBluetooth Module
Test FirmMRT Technology (Suzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-08-26
2402-2480 MHzOriginal Equipment2020-08-26

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2020-08-26PDF 1.3 MB
Internal PhotosInternal Photos2020-08-26PDF 272.2 KB
External PhotosExternal Photos2020-08-26PDF 632.2 KB
ID Label and LocationID Label/Location Info2020-08-26PDF 657.5 KB
Test Setup PhotosTest Setup Photos2020-08-26PDF 569.3 KB
Test Report_DSS-1Test Report2020-08-26PDF 5.2 MB
Test Report_DSS-2Test Report2020-08-26PDF 5.3 MB
Test Report_DTSTest Report2020-08-26PDF 3.8 MB
Confidentiality Request LetterCover Letter(s)2020-08-26PDF 26.2 KB
Modular Approval LetterCover Letter(s)2020-08-26PDF 29.7 KB
Modular Approval LetterCover Letter(s)2020-08-26PDF 51.4 KB
POACover Letter(s)2020-08-26PDF 17.5 KB
RF Exposure InformationRF Exposure Info2020-08-26PDF 164.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 121.2 KB
Schematics Metadata onlySchematicsPDF 375.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 176.4 KB

Application Information

Application IDtOO0B1IfeMNdbX+eaDvz0w==
Final Action Date2020-08-26
Application PurposeOriginal Equipment
Applicant FRN0018740043
ModelQCC3008
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionBluetooth Module
Responsible PartyWyn B Wang, General Manager, wyn.wang@hansong-china.com , 0086-25-66612888
Test FirmMr. Marlin Chen, MRT Technology (Suzhou) Co., Ltd., marlinchen@mrt-cert.com , +86-512-66308358
TCB Emailstuart.beck@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle modular approval. Output power listed is conducted. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. The OEM integrators must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
tOO0B1IfeMNdbX+eaDvz0w==2020-08-26Original Equipment
EfUf/TQVr5cwPd9q86aV4Q==2020-08-26Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.004000015CCC
2402-2480 MHz0.000400015CCC

Grants

TCB Grant - Application tOO0B1IfeMNdbX+eaDvz0w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 08/26/2020

Application Dated: 08/26/2020
Hansong(Nanjing) Technology Ltd.
8th Kangping Road
Jiangning Economy and Technology Development Zone
Nanjing, 211100
China
 
Attention: Wyn B Wang , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XCO-QCC3008
Name of Grantee:  Hansong(Nanjing) Technology Ltd.
Equipment Class: Digital Transmission System
Notes: Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0004  

Single modular approval. Output power listed is conducted. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. The OEM integrators must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application tOO0B1IfeMNdbX+eaDvz0w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hansong(Nanjing) Technology Ltd.
8th Kangping Road Jiangning Economy and Technology Development Zone
Nanjing, 211100
China
  Date of Grant: 08/26/2020

Application Dated: 08/26/2020
 
Attention: Wyn B Wang , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XCO-QCC3008
Name of Grantee:  Hansong(Nanjing) Technology Ltd.
Equipment Class: Digital Transmission System
Notes: Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0004  

Single modular approval. Output power listed is conducted. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. The OEM integrators must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application EfUf/TQVr5cwPd9q86aV4Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 08/26/2020

Application Dated: 08/26/2020
Hansong(Nanjing) Technology Ltd.
8th Kangping Road
Jiangning Economy and Technology Development Zone
Nanjing, 211100
China
 
Attention: Wyn B Wang , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XCO-QCC3008
Name of Grantee:  Hansong(Nanjing) Technology Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Single modular approval. Output power listed is conducted. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. The OEM integrators must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application EfUf/TQVr5cwPd9q86aV4Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hansong(Nanjing) Technology Ltd.
8th Kangping Road Jiangning Economy and Technology Development Zone
Nanjing, 211100
China
  Date of Grant: 08/26/2020

Application Dated: 08/26/2020
 
Attention: Wyn B Wang , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XCO-QCC3008
Name of Grantee:  Hansong(Nanjing) Technology Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Single modular approval. Output power listed is conducted. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. The OEM integrators must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: