FCC ID XD6U1030AA
Mobile Phone
by Shenzhen Tinno Mobile Technology Corp
Grantee Code: XD6 Product Code: U1030AA
Latest application date: 2026-10-15
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 1860-1900 MHz | Class II permissive change or modification of presently authorized equipment | 2026-10-15 |
| 869-894 MHz | Class II permissive change or modification of presently authorized equipment | 2026-10-15 |
| 88-108 MHz | Original Equipment | 2023-03-14 |
| 2402-2480 MHz | Original Equipment | 2023-03-14 |
| 2402-2480 MHz | Original Equipment | 2023-03-14 |
| 1860-1900 MHz | Original Equipment | 2023-03-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| TempConfidential_ATT_Midvale_UG_EN_V2b_0228 | Users Manual | 2023-09-10 | PDF 3.1 MB |
| TempConfidential_Internal | Internal Photos | 2023-09-10 | PDF 3.5 MB |
| TempConfidential_External | External Photos | 2023-09-10 | PDF 4.6 MB |
| label | ID Label/Location Info | 2023-03-14 | PDF 181.7 KB |
| TempConfidential_The_photos_of_HAC_test_I22Z62463 | Test Setup Photos | 2023-09-10 | PDF 179.8 KB |
| TempConfidential_setup | Test Setup Photos | 2023-09-10 | PDF 1.7 MB |
| The Photos of SAR test - I22Z62463_v1 | Test Setup Photos | 2023-09-10 | PDF 1.4 MB |
| Test Report | Test Report | 2026-10-15 | PDF 1.3 MB |
| Ti-CC26090196-401 JBP Test report | Test Report | 2026-10-15 | PDF 1.3 MB |
| Ti-CC26090196-501 Data Part 1 | Test Report | 2026-10-15 | PDF 3.5 MB |
| Ti-CC26090196-501 Data Part 2 | Test Report | 2026-10-15 | PDF 1.7 MB |
| Ti-CC26090196-501 Data Part 3 | Test Report | 2026-10-15 | PDF 309.9 KB |
| Ti-CC26090196-501 PCE test report | Test Report | 2026-10-15 | PDF 5.2 MB |
| Ti-CC26090196-701 FCC SAR test report | RF Exposure Info | 2026-10-15 | PDF 1.7 MB |
| Antenna_gain_U1030AA_20230115 | Test Report | 2023-03-14 | PDF 92.5 KB |
| I22Z62463-EMC01_FCC 15B_Rev1 | Test Report | 2023-03-14 | PDF 1.7 MB |
| I22Z62463-IOT01_FCC_Report_Part15C_EDR_Rev0_part1 | Test Report | 2023-03-14 | PDF 4.9 MB |
| I22Z62463-IOT01_FCC_Report_Part15C_EDR_Rev0_part2 | Test Report | 2023-03-14 | PDF 5 MB |
| I22Z62463-IOT02_FCC_Report_Part15C_BLE_Rev0 | Test Report | 2023-03-14 | PDF 2.7 MB |
| I22Z62463-IOT03_FCC_Report_WLAN_2.4G_Rev0 | Test Report | 2023-03-14 | PDF 4.2 MB |
| I22Z62463-SEM01_HAC_Rev0 | Test Report | 2023-03-14 | PDF 508.5 KB |
| I22Z62463-WMD01_Part222427_WCDMA_Rev0 | Test Report | 2023-03-14 | PDF 1.1 MB |
| I22Z62463_SEM02_T-coil_Rev0 | Test Report | 2023-03-14 | PDF 2 MB |
| I22Z62463_WMD02_Part22242790_LTE_Rev0 | Test Report | 2023-03-14 | PDF 2.5 MB |
| U1030_Antenna_Data_Sheet_20230309_update | Test Report | 2023-03-14 | PDF 500.5 KB |
| Attestation Statements | Attestation Statements | 2026-10-15 | PDF 128.7 KB |
| US Agent Letter | Attestation Statements | 2026-10-15 | PDF 42.4 KB |
| 6_ACB-FORM-FCC-Application-Letters_Rev_17_R2_Covered_List_Attestation | Attestation Statements | 2023-03-14 | PDF 943.3 KB |
| 7_ACB-FORM-FCC-Application-Letters_Rev_17_R2_Agent_Letter_for_Service_of_Process | Attestation Statements | 2023-03-14 | PDF 1.7 MB |
| Authorization Letter | Cover Letter(s) | 2026-10-15 | PDF 44.7 KB |
| Confidentiality | Cover Letter(s) | 2026-10-15 | PDF 68.9 KB |
| Declaration of Identity Form | Cover Letter(s) | 2026-10-15 | PDF 261.2 KB |
| FCC Class II PC request letter | Cover Letter(s) | 2026-10-15 | PDF 161.7 KB |
| Declaration_letter_for_WLAN_ch12-13_20230220 | Cover Letter(s) | 2023-03-14 | PDF 308.4 KB |
| FCC_Authorization_Letter_20230220 | Cover Letter(s) | 2023-03-14 | PDF 493.8 KB |
| FCC_Confidentiality_Request_Letter_20230220 | Cover Letter(s) | 2023-03-14 | PDF 793.2 KB |
| U1030AA_U1030AC_Product_Change_Description_20230309 | Cover Letter(s) | 2023-03-14 | PDF 321.3 KB |
| Ti-CC26090196-AC Calibration report_1 | RF Exposure Info | 2026-10-15 | PDF 4.6 MB |
| Ti-CC26090196-AC Calibration report_2 | RF Exposure Info | 2026-10-15 | PDF 4.9 MB |
| Ti-CC26090196-AC Calibration report_3 | RF Exposure Info | 2026-10-15 | PDF 4.8 MB |
| Ti-CC26090196-AC Calibration report_4 | RF Exposure Info | 2026-10-15 | PDF 2.1 MB |
| Ti-CC26090196-ASC | RF Exposure Info | 2026-10-15 | PDF 280 KB |
| Ti-CC26090196-ATD | RF Exposure Info | 2026-10-15 | PDF 369.5 KB |
| I22Z62463-SEM03_SAR_Rev4_part1 | RF Exposure Info | 2023-03-14 | PDF 4.9 MB |
| I22Z62463-SEM03_SAR_Rev4_part2 | RF Exposure Info | 2023-03-14 | PDF 4.9 MB |
| I22Z62463-SEM03_SAR_Rev4_part3 | RF Exposure Info | 2023-03-14 | PDF 4.7 MB |
| Internal Photos Metadata only | Internal Photos | 2027-04-12 | PDF 2.5 MB |
| External Photos Metadata only | External Photos | 2027-04-12 | PDF 1.9 MB |
| Test Setup Photos Metadata only | Test Setup Photos | 2027-04-12 | PDF 553 KB |
| Ti-CC26090196-AE-1 EUT test setup photo Metadata only | Test Setup Photos | 2027-04-12 | PDF 553 KB |
| Ti-CC26090196-AR RF test setup photo Metadata only | Test Setup Photos | 2027-04-12 | PDF 147.5 KB |
| Ti-CC26090196-AS SAR test setup photo Metadata only | Test Setup Photos | 2027-04-12 | PDF 330.6 KB |
| Confidential_U1030AA_Block_Diagram-RF_20230303 Metadata only | Block Diagram | PDF 354.7 KB | |
| Confidential_5.U1030AA_SUB_V0.10_SILK_20221008 Metadata only | Schematics | PDF 99 KB | |
| Confidential_6. U1030AA_SUB_SCH_V0.1_1007_0900 Metadata only | Schematics | PDF 215.6 KB | |
| Confidential_U1030AA_MB_V1.0_0310_1022_add_note_for_FCC Metadata only | Schematics | PDF 1.2 MB | |
| Confidential_Operation_description_20230313 Metadata only | Operational Description | PDF 1.3 MB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 331.2 KB | |
| Confidential_Part_list_0224 Metadata only | Parts List/Tune Up Info | PDF 210.6 KB | |
| Confidential_U1030AA_Tune_up_Procedure_20230227 Metadata only | Parts List/Tune Up Info | PDF 276.1 KB |
Application Information
| Application ID | vupHtR4XLDKkmd4ZZKZ3sA== |
|---|---|
| Final Action Date | 2026-10-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018783100 |
| Model | U1030AA |
| Frequency Range | 1860-1900 MHz |
| Equipment Class | PCE - PCS Licensed Transmitter held to ear |
| Device Description | Mobile Phone |
| Responsible Party | xiaoping LI, xiaoping.li@tinno.com  , (86) 755-86095550 |
| Technical Contact | xuewen wu, Shenzhen BALUN Technology Co., Ltd, cbproject@baluntek.com  , 075566850100 |
| Non-Technical Contact | Brandy Kang, TINNO USAINC, WIKOUSA2017@GMAIL.COM  , 626200-5096 |
| Test Firm | Hanson Lin, Shenzhen BALUN Technology Co., Ltd., Hanson.Lin@baluntek.com , 86-755-66833830 |
| TCB Email | dl_radio-certification@kiwa.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | Yes |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vupHtR4XLDKkmd4ZZKZ3sA== | 2026-10-15 | Class II permissive change or modification of presently authorized equipment |
| gm6dZZgaLrH2IzBMYCEqug== | 2026-10-15 | Class II permissive change or modification of presently authorized equipment |
| UkkRKnChn/+msf7Q9QTTKg== | 2026-10-15 | Class II permissive change or modification of presently authorized equipment |
| lAlvx61aX3+tQPqRqBPSnQ== | 2023-03-14 | Original Equipment |
| ctEppUr+gL+t4T2LfAfk5Q== | 2023-03-14 | Original Equipment |
| cDrlHsuXvy1OngXrjj/LIQ== | 2023-03-14 | Original Equipment |
| VGoU4qdOfJI9RsewdX+n4A== | 2023-03-14 | Original Equipment |
| 4xSTNFeD0Q4gs+ulDqC5iA== | 2023-03-14 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 15B | CC | ||||
| 88-108 MHz | 15B | CC | |||
| 699.7-715.3 MHz | 0.157 | 0.1ppm | 1M10G7D | 27 | BC, HC |
| 699.7-715.3 MHz | 0.1175 | 0.1ppm | 1M10W7D | 27 | BC, HC |
| 704-711 MHz | 0.1432 | 0.1ppm | 8M94G7D | 27 | BC, HC |
| 704-711 MHz | 0.1072 | 0.1ppm | 8M94W7D | 27 | BC, HC |
| 729-746 MHz | 15B | CC | |||
| 758-768 MHz | 15B | CC | |||
| 790.5-795.5 MHz | 0.0834 | 0.1ppm | 4M50W7D | 9 | BC, HC |
| 793 MHz | 0.1094 | 0.1ppm | 8M94G7D | 9 | BC, HC |
| 793 MHz | 0.0787 | 0.1ppm | 8M94W7D | 9 | BC, HC |
| 824.7-848.3 MHz | 0.1416 | 0.1ppm | 1M09G7D | 22H | BC, HC |
| 824.7-848.3 MHz | 0.1178 | 0.1ppm | 1M09W7D | 22H | BC, HC |
| 826.4-846.6 MHz | 0.13 | 0.1ppm | 4M15F9W | 22H | BC, HC |
| 829-844 MHz | 0.1343 | 0.1ppm | 8M94G7D | 22H | BC, HC |
| 829-844 MHz | 0.1094 | 0.1ppm | 8M94W7D | 22H | BC, HC |
| 869-894 MHz | 15B | CC | |||
| 1712.5-1752.5 MHz | 0.1977 | 0.1ppm | 4M47W7D | 27 | BC, HC |
| 1720-1745 MHz | 0.2393 | 0.1ppm | 17M9G7D | 27 | BC, HC |
| 1720-1745 MHz | 0.1862 | 0.1ppm | 17M9W7D | 27 | BC, HC |
| 1852.5-1907.5 MHz | 0.182 | 0.1ppm | 4M52W7D | 24E | BC, HC |
| 1860-1900 MHz | 0.2265 | 0.1ppm | 17M9G7D | 24E | BC, HC |
| 1860-1900 MHz | 0.1799 | 0.1ppm | 17M9W7D | 24E | BC, HC |
| 2402-2480 MHz | 0.0014 | 15C | CC | ||
| 2402-2480 MHz | 0.0182000 | 15C | CC | ||
| 2412-2462 MHz | 0.1081 | 15C | CC, HC |
Grants
TCB Grant - Application vupHtR4XLDKkmd4ZZKZ3sA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 10/15/2026 Application Dated: 10/13/2026 |
| Shenzhen Tinno Mobile Technology Corp |
| 27-001, South side of Tianlong mobile HQ Building, |
| Tongfa South Road, Xili Street, Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U1030AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC HC | 24E | 1852.4 - 1907.6 | 0.236 | 0.1 PM | 4M17F9W |
| BC HC | 27 | 1712.4 - 1752.6 | 0.2208 | 0.1 PM | 4M15F9W |
| BC HC | 22H | 826.4 - 846.6 | 0.13 | 0.1 PM | 4M15F9W |
| BC HC | 24E | 1860.0 - 1900.0 | 0.2265 | 0.1 PM | 17M9G7D |
| BC HC | 24E | 1852.5 - 1907.5 | 0.182 | 0.1 PM | 4M52W7D |
| BC HC | 24E | 1860.0 - 1900.0 | 0.1799 | 0.1 PM | 17M9W7D |
| BC HC | 27 | 1720.0 - 1745.0 | 0.2393 | 0.1 PM | 17M9G7D |
| BC HC | 27 | 1712.5 - 1752.5 | 0.1977 | 0.1 PM | 4M47W7D |
| BC HC | 27 | 1720.0 - 1745.0 | 0.1862 | 0.1 PM | 17M9W7D |
| BC HC | 22H | 824.7 - 848.3 | 0.1416 | 0.1 PM | 1M09G7D |
| BC HC | 22H | 829.0 - 844.0 | 0.1343 | 0.1 PM | 8M94G7D |
| BC HC | 22H | 824.7 - 848.3 | 0.1178 | 0.1 PM | 1M09W7D |
| BC HC | 22H | 829.0 - 844.0 | 0.1094 | 0.1 PM | 8M94W7D |
| BC HC | 27 | 699.7 - 715.3 | 0.157 | 0.1 PM | 1M10G7D |
| BC HC | 27 | 704.0 - 711.0 | 0.1432 | 0.1 PM | 8M94G7D |
| BC HC | 27 | 699.7 - 715.3 | 0.1175 | 0.1 PM | 1M10W7D |
| BC HC | 27 | 704.0 - 711.0 | 0.1072 | 0.1 PM | 8M94W7D |
| BC HC | 90 | 793.0 - 793.0 | 0.1094 | 0.1 PM | 8M94G7D |
| BC HC | 90 | 790.5 - 795.5 | 0.0834 | 0.1 PM | 4M50W7D |
| BC HC | 90 | 793.0 - 793.0 | 0.0787 | 0.1 PM | 8M94W7D |
| Class II Permissive Change : The suppliers of RF switches and duplexer and duplexer replacement parts are different, but the equipment specifications and materials remain the same. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
TCB Grant - Application VGoU4qdOfJI9RsewdX+n4A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 03/14/2023 Application Dated: 03/09/2023 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U1030AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0182 |
| Power output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 15 mm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg, <0.10 W/kg and 1.37 W/kg, respectively. This device also contains BLE, 2.4GHz WLAN and WCDMA/LTE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application VGoU4qdOfJI9RsewdX+n4A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 03/14/2023 Application Dated: 03/09/2023 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U1030AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Mobile Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0182 |
| Power output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 15 mm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg, <0.10 W/kg and 1.37 W/kg, respectively. This device also contains BLE, 2.4GHz WLAN and WCDMA/LTE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 10/15/2026 Application Dated: 10/13/2026 |
| Shenzhen Tinno Mobile Technology Corp |
| 27-001, South side of Tianlong mobile HQ Building, |
| Tongfa South Road, Xili Street, Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U1030AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Communications Rcvr for use w/ licensed Tx and CBs |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | 869.0 - 894.0 | |||
| CC | 15B | 729.0 - 746.0 | |||
| CC | 15B | 758.0 - 768.0 | |||
| CC | 15B | 88.0 - 108.0 |
| Class II Permissive Change : The suppliers of RF switches and duplexer and duplexer replacement parts are different, but the equipment specifications and materials remain the same. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application lAlvx61aX3+tQPqRqBPSnQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 03/14/2023 Application Dated: 03/09/2023 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U1030AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Communications Rcvr for use w/ licensed Tx and CBs |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | 869.0 - 894.0 | |||
| CC | 15B | 729.0 - 746.0 | |||
| CC | 15B | 758.0 - 768.0 | |||
| CC | 15B | 88.0 - 108.0 |
| This device contains Bluetooth, BLE, 2.4GHz WLAN and WCDMA/LTE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application lAlvx61aX3+tQPqRqBPSnQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 03/14/2023 Application Dated: 03/09/2023 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U1030AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Communications Rcvr for use w/ licensed Tx and CBs |
| Notes: | Mobile Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | 869.0 - 894.0 | |||
| CC | 15B | 729.0 - 746.0 | |||
| CC | 15B | 758.0 - 768.0 | |||
| CC | 15B | 88.0 - 108.0 |
| This device contains Bluetooth, BLE, 2.4GHz WLAN and WCDMA/LTE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 10/15/2026 Application Dated: 10/13/2026 |
| Shenzhen Tinno Mobile Technology Corp |
| 27-001, South side of Tianlong mobile HQ Building, |
| Tongfa South Road, Xili Street, Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U1030AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| Class II Permissive Change : The suppliers of RF switches and duplexer and duplexer replacement parts are different, but the equipment specifications and materials remain the same. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application ctEppUr+gL+t4T2LfAfk5Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 03/14/2023 Application Dated: 03/09/2023 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U1030AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Digital Transmission System |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0014 | ||
| CC HC | 15C | 2412.0 - 2462.0 | 0.1081 |
| Power output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 15 mm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.12 W/kg, <0.10 W/kg, <0.10 W/kg and 1.37 W/kg, respectively. This device only supports 20 MHz BW modes in 2.4G WLAN transmitter and it also contains Bluetooth and WCDMA/LTE transmitters. HAC Rating: M4/T4 -2011. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
EAS Grant - Application ctEppUr+gL+t4T2LfAfk5Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 03/14/2023 Application Dated: 03/09/2023 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U1030AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Digital Transmission System |
| Notes: | Mobile Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0014 | ||
| CC HC | 15C | 2412.0 - 2462.0 | 0.1081 |
| Power output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 15 mm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.12 W/kg, <0.10 W/kg, <0.10 W/kg and 1.37 W/kg, respectively. This device only supports 20 MHz BW modes in 2.4G WLAN transmitter and it also contains Bluetooth and WCDMA/LTE transmitters. HAC Rating: M4/T4 -2011. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 03/14/2023 Application Dated: 03/09/2023 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U1030AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| This device contains Bluetooth, BLE, 2.4GHz WLAN and WCDMA/LTE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application cDrlHsuXvy1OngXrjj/LIQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 03/14/2023 Application Dated: 03/09/2023 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U1030AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Mobile Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| This device contains Bluetooth, BLE, 2.4GHz WLAN and WCDMA/LTE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 03/14/2023 Application Dated: 03/09/2023 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U1030AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC HC | 24E | 1852.4 - 1907.6 | 0.236 | 0.1 PM | 4M17F9W |
| BC HC | 27 | 1712.4 - 1752.6 | 0.2208 | 0.1 PM | 4M15F9W |
| BC HC | 22H | 826.4 - 846.6 | 0.13 | 0.1 PM | 4M15F9W |
| BC HC | 24E | 1860.0 - 1900.0 | 0.2265 | 0.1 PM | 17M9G7D |
| BC HC | 24E | 1852.5 - 1907.5 | 0.182 | 0.1 PM | 4M52W7D |
| BC HC | 24E | 1860.0 - 1900.0 | 0.1799 | 0.1 PM | 17M9W7D |
| BC HC | 27 | 1720.0 - 1745.0 | 0.2393 | 0.1 PM | 17M9G7D |
| BC HC | 27 | 1712.5 - 1752.5 | 0.1977 | 0.1 PM | 4M47W7D |
| BC HC | 27 | 1720.0 - 1745.0 | 0.1862 | 0.1 PM | 17M9W7D |
| BC HC | 22H | 824.7 - 848.3 | 0.1416 | 0.1 PM | 1M09G7D |
| BC HC | 22H | 829.0 - 844.0 | 0.1343 | 0.1 PM | 8M94G7D |
| BC HC | 22H | 824.7 - 848.3 | 0.1178 | 0.1 PM | 1M09W7D |
| BC HC | 22H | 829.0 - 844.0 | 0.1094 | 0.1 PM | 8M94W7D |
| BC HC | 27 | 699.7 - 715.3 | 0.157 | 0.1 PM | 1M10G7D |
| BC HC | 27 | 704.0 - 711.0 | 0.1432 | 0.1 PM | 8M94G7D |
| BC HC | 27 | 699.7 - 715.3 | 0.1175 | 0.1 PM | 1M10W7D |
| BC HC | 27 | 704.0 - 711.0 | 0.1072 | 0.1 PM | 8M94W7D |
| BC HC | 90 | 793.0 - 793.0 | 0.1094 | 0.1 PM | 8M94G7D |
| BC HC | 90 | 790.5 - 795.5 | 0.0834 | 0.1 PM | 4M50W7D |
| BC HC | 90 | 793.0 - 793.0 | 0.0787 | 0.1 PM | 8M94W7D |
| Power output is ERP for Part 22/27/90 and EIRP for Part 24/27. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 15 mm separation between the device and the user’s body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.67 W/kg, 1.26 W/kg, 1.34 W/kg and 1.37 W/kg, respectively. This filing is only applicable for 700 MHz MBS, 850 MHz Cell, 1700 MHz AWS and 1900 MHz PCS operations. This device has 1.4/3/5/10/15/20 MHz bandwidth modes for LTE Bands 2/4; 1.4/3/5/10 MHz bandwidth modes for LTE Bands 5/12 and 5/10 MHz bandwidth modes for LTE Band 14. This device also contains Bluetooth, BLE and 2.4GHz WLAN transmitters. HAC Rating: M4/T4-2011. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
EAS Grant - Application 4xSTNFeD0Q4gs+ulDqC5iA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 03/14/2023 Application Dated: 03/09/2023 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U1030AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | Mobile Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC HC | 24E | 1852.4 - 1907.6 | 0.236 | 0.1 PM | 4M17F9W |
| BC HC | 27 | 1712.4 - 1752.6 | 0.2208 | 0.1 PM | 4M15F9W |
| BC HC | 22H | 826.4 - 846.6 | 0.13 | 0.1 PM | 4M15F9W |
| BC HC | 24E | 1860.0 - 1900.0 | 0.2265 | 0.1 PM | 17M9G7D |
| BC HC | 24E | 1852.5 - 1907.5 | 0.182 | 0.1 PM | 4M52W7D |
| BC HC | 24E | 1860.0 - 1900.0 | 0.1799 | 0.1 PM | 17M9W7D |
| BC HC | 27 | 1720.0 - 1745.0 | 0.2393 | 0.1 PM | 17M9G7D |
| BC HC | 27 | 1712.5 - 1752.5 | 0.1977 | 0.1 PM | 4M47W7D |
| BC HC | 27 | 1720.0 - 1745.0 | 0.1862 | 0.1 PM | 17M9W7D |
| BC HC | 22H | 824.7 - 848.3 | 0.1416 | 0.1 PM | 1M09G7D |
| BC HC | 22H | 829.0 - 844.0 | 0.1343 | 0.1 PM | 8M94G7D |
| BC HC | 22H | 824.7 - 848.3 | 0.1178 | 0.1 PM | 1M09W7D |
| BC HC | 22H | 829.0 - 844.0 | 0.1094 | 0.1 PM | 8M94W7D |
| BC HC | 27 | 699.7 - 715.3 | 0.157 | 0.1 PM | 1M10G7D |
| BC HC | 27 | 704.0 - 711.0 | 0.1432 | 0.1 PM | 8M94G7D |
| BC HC | 27 | 699.7 - 715.3 | 0.1175 | 0.1 PM | 1M10W7D |
| BC HC | 27 | 704.0 - 711.0 | 0.1072 | 0.1 PM | 8M94W7D |
| BC HC | 90 | 793.0 - 793.0 | 0.1094 | 0.1 PM | 8M94G7D |
| BC HC | 90 | 790.5 - 795.5 | 0.0834 | 0.1 PM | 4M50W7D |
| BC HC | 90 | 793.0 - 793.0 | 0.0787 | 0.1 PM | 8M94W7D |
| Power output is ERP for Part 22/27/90 and EIRP for Part 24/27. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 15 mm separation between the device and the user’s body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.67 W/kg, 1.26 W/kg, 1.34 W/kg and 1.37 W/kg, respectively. This filing is only applicable for 700 MHz MBS, 850 MHz Cell, 1700 MHz AWS and 1900 MHz PCS operations. This device has 1.4/3/5/10/15/20 MHz bandwidth modes for LTE Bands 2/4; 1.4/3/5/10 MHz bandwidth modes for LTE Bands 5/12 and 5/10 MHz bandwidth modes for LTE Band 14. This device also contains Bluetooth, BLE and 2.4GHz WLAN transmitters. HAC Rating: M4/T4-2011. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
| Mail To: |