FCC ID XD6U380AA
Smart Phone with WCDMA, LTE, WiFi and Bluetooth
by Shenzhen Tinno Mobile Technology Corp
Grantee Code: XD6 Product Code: U380AA
Latest application date: 2023-06-13
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 729-746 MHz | Original Equipment | 2023-06-13 |
| 2412-2462 MHz | Original Equipment | 2023-06-11 |
| 5745-5825 MHz | Original Equipment | 2023-06-11 |
| 2510-2560 MHz | Original Equipment | 2023-06-11 |
| 2402-2480 MHz | Original Equipment | 2023-06-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2023-12-05 | PDF 78.2 KB |
| UserManual | Users Manual | 2023-12-05 | PDF 78.2 KB |
| User_manual | Users Manual | 2023-12-05 | PDF 78.2 KB |
| InternalPhotos | Internal Photos | 2023-12-05 | PDF 2.9 MB |
| Internal_photo | Internal Photos | 2023-12-05 | PDF 2.9 MB |
| Exnternal_photo | External Photos | 2023-12-05 | PDF 865 KB |
| ExternalPhotos | External Photos | 2023-12-05 | PDF 865 KB |
| Label_LabelLocation | ID Label/Location Info | 2023-06-13 | PDF 63.1 KB |
| label | ID Label/Location Info | 2023-06-11 | PDF 63.1 KB |
| 15B_Setup_Photos | Test Setup Photos | 2023-12-05 | PDF 2.2 MB |
| AppendixD_Photographs | Test Setup Photos | 2023-12-05 | PDF 953.1 KB |
| RF-AppendixD_Photographs | Test Setup Photos | 2023-12-05 | PDF 514.9 KB |
| T-Coil_AppendixC_Photographs | Test Setup Photos | 2023-12-05 | PDF 536.6 KB |
| TestSetupPhotos_15B | Test Setup Photos | 2023-12-05 | PDF 2.2 MB |
| Test_Setup_Photo_15C | Test Setup Photos | 2023-12-05 | PDF 776.8 KB |
| Test_Setup_Photo_HAC_RF | Test Setup Photos | 2023-12-05 | PDF 514.9 KB |
| Test_Setup_Photo_SAR | Test Setup Photos | 2023-12-05 | PDF 953.1 KB |
| Test_Setup_Photo_T-coil | Test Setup Photos | 2023-12-05 | PDF 536.6 KB |
| WLAN_Setup_Photos | Test Setup Photos | 2023-12-05 | PDF 776.8 KB |
| WWAN_Setup_Photos | Test Setup Photos | 2023-12-05 | PDF 5.4 MB |
| Antenna_datasheet | Test Report | 2023-06-13 | PDF 1.2 MB |
| SEWM2304000115RG09_FCC_15B_TestReport | Test Report | 2023-06-13 | PDF 1.2 MB |
| Antenna _SEPC | Test Report | 2023-06-11 | PDF 1.2 MB |
| Antenna _report | Test Report | 2023-06-11 | PDF 1.2 MB |
| AppendixA_HAC_RF | Test Report | 2023-06-11 | PDF 169.5 KB |
| AppendixA_HAC_T-Coil | Test Report | 2023-06-11 | PDF 4.2 MB |
| AppendixB1_WCDMA | Test Report | 2023-06-11 | PDF 4.5 MB |
| AppendixB2_LTE_Band2 | Test Report | 2023-06-11 | PDF 3.5 MB |
| AppendixB3_LTE_Band4 | Test Report | 2023-06-11 | PDF 3.5 MB |
| AppendixB4_LTE_Band5 | Test Report | 2023-06-11 | PDF 5.5 MB |
| AppendixB5_LTE_Band7 | Test Report | 2023-06-11 | PDF 2.8 MB |
| AppendixB6_LTE_Band12 | Test Report | 2023-06-11 | PDF 5.4 MB |
| AppendixB7_LTE_Band14 | Test Report | 2023-06-11 | PDF 3.1 MB |
| AppendixB8_LTE_Band30 | Test Report | 2023-06-11 | PDF 2.6 MB |
| AppendixB9_LTE_Band66 | Test Report | 2023-06-11 | PDF 3.5 MB |
| AppendixB_HAC_RF | Test Report | 2023-06-11 | PDF 336.4 KB |
| AppendixB_HAC_T-Coil | Test Report | 2023-06-11 | PDF 512.2 KB |
| AppendixC_HAC_RF | Test Report | 2023-06-11 | PDF 3.1 MB |
| HAC-T-coil-Appendix_A | Test Report | 2023-06-11 | PDF 4.2 MB |
| HAC-T-coil-Appendix_B | Test Report | 2023-06-11 | PDF 512.2 KB |
| SEWM2304000115RG02-HAC-T-Coil | Test Report | 2023-06-11 | PDF 1.1 MB |
| SEWM2304000115RG02_HAC_T-Coil_TestReport | Test Report | 2023-06-11 | PDF 1.1 MB |
| SEWM2304000115RG03-HAC-RF | Test Report | 2023-06-11 | PDF 756.2 KB |
| SEWM2304000115RG03_HAC_RF-Emission_TestReport | Test Report | 2023-06-11 | PDF 756.2 KB |
| SEWM2304000115RG04_RF_TestReport | Test Report | 2023-06-11 | PDF 1.4 MB |
| SEWM2304000115RG05_Bluetooth | Test Report | 2023-06-11 | PDF 4.1 MB |
| SEWM2304000115RG06-BLE | Test Report | 2023-06-11 | PDF 4.1 MB |
| SEWM2304000115RG07_WIFI | Test Report | 2023-06-11 | PDF 3.7 MB |
| SEWM2304000115RG08_5GWIFI_part1 | Test Report | 2023-06-11 | PDF 3.9 MB |
| SEWM2304000115RG08_5GWIFI_part2 | Test Report | 2023-06-11 | PDF 3.1 MB |
| SEWM2304000115RG08_5GWIFI_part3 | Test Report | 2023-06-11 | PDF 1.7 MB |
| SEWM2304000115RG09_15B_TestReport | Test Report | 2023-06-11 | PDF 3.4 MB |
| SEWM2304000115RG09_FCC_15B_TestReport | Test Report | 2023-06-11 | PDF 1.2 MB |
| FCC_AttestationLetter_COVERED_EQUIPMENT | Attestation Statements | 2023-06-13 | PDF 68.1 KB |
| FCC_Attestation_Letter_US_AGENT | Attestation Statements | 2023-06-13 | PDF 116.6 KB |
| Agent_letter | Attestation Statements | 2023-06-11 | PDF 116.6 KB |
| Attestation_Statements part 2.911_d__5 | Attestation Statements | 2023-06-11 | PDF 68.1 KB |
| ConfidentialityRequestLetter | Cover Letter(s) | 2023-06-13 | PDF 141.7 KB |
| Declaration_of_Authorization | Cover Letter(s) | 2023-06-13 | PDF 120.9 KB |
| Product_Change_Description | Cover Letter(s) | 2023-06-13 | PDF 35.9 KB |
| UNII_DeclarationLetter | Cover Letter(s) | 2023-06-13 | PDF 119 KB |
| AuthorizationLetter | Cover Letter(s) | 2023-06-11 | PDF 120.9 KB |
| Declaration_Letter | Cover Letter(s) | 2023-06-11 | PDF 35.9 KB |
| POA | Cover Letter(s) | 2023-06-11 | PDF 120.9 KB |
| confidential_letter | Cover Letter(s) | 2023-06-11 | PDF 141.7 KB |
| AppendixA | RF Exposure Info | 2023-06-11 | PDF 2.3 MB |
| AppendixB_part1 | RF Exposure Info | 2023-06-11 | PDF 5.4 MB |
| AppendixB_part2 | RF Exposure Info | 2023-06-11 | PDF 2.9 MB |
| AppendixC_part1 | RF Exposure Info | 2023-06-11 | PDF 5.5 MB |
| AppendixC_part2 | RF Exposure Info | 2023-06-11 | PDF 5.2 MB |
| SAR_Appendix-B-1 | RF Exposure Info | 2023-06-11 | PDF 5.4 MB |
| SAR_Appendix-B-2 | RF Exposure Info | 2023-06-11 | PDF 2.9 MB |
| SAR_Appendix-C-1 | RF Exposure Info | 2023-06-11 | PDF 5.5 MB |
| SAR_Appendix-C-2 | RF Exposure Info | 2023-06-11 | PDF 5.2 MB |
| SEWM2304000115RG01_FCC_SAR_Report | RF Exposure Info | 2023-06-11 | PDF 4.2 MB |
| SEWM2304000115RG01_SAR | RF Exposure Info | 2023-06-11 | PDF 4.2 MB |
| BlockDiagram Metadata only | Block Diagram | PDF 291.7 KB | |
| SCH Metadata only | Schematics | PDF 1.8 MB | |
| Schematic Metadata only | Schematics | PDF 1.8 MB | |
| OperationalDescription Metadata only | Operational Description | PDF 865.8 KB | |
| NII_Software_Security_info Metadata only | SDR Software/Security Inf | PDF 215.3 KB | |
| SOFTWARE_SECURITY Metadata only | SDR Software/Security Inf | PDF 215.3 KB | |
| Software_Security Metadata only | SDR Software/Security Inf | PDF 215.3 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 128.3 KB | |
| Tune-up Metadata only | Parts List/Tune Up Info | PDF 265 KB | |
| Tune_up_procedure Metadata only | Parts List/Tune Up Info | PDF 265 KB |
Application Information
| Application ID | 9rqcD9/Co5eqxaaZWtpfvA== |
|---|---|
| Final Action Date | 2023-06-13 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0018783100 |
| Model | U380AA |
| Frequency Range | 729-746 MHz |
| Equipment Class | CXX - Communications Rcvr for use w/ licensed Tx and CBs |
| Device Description | Smart Phone with WCDMA, LTE, WiFi and Bluetooth |
| Responsible Party | xiaoping LI, Manager, xiaoping.li@tinno.com |
| Test Firm | Vinny Chen, SGS-CSTC Standards Technical Services (Suzhou) Co., Vinny.Chen@sgs.com |
| TCB Email | bentje.holger@phoenix-testlab.de |
| TCB Scope | A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/05/2023 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 9rqcD9/Co5eqxaaZWtpfvA== | 2023-06-13 | Original Equipment |
| gCL+/w8M/AqeHvKLmK7ysA== | 2023-06-11 | Original Equipment |
| dSbMcEJpfqJF9WjEzwevMQ== | 2023-06-11 | Original Equipment |
| QUIQvPUKKQs6DIQwlCF0tw== | 2023-06-11 | Original Equipment |
| JgvUIZOMPJbD7mJ7mpqZuQ== | 2023-06-11 | Original Equipment |
| +lnLzSRP5L9CujwP9FKFNQ== | 2023-06-11 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 15B | CC | ||||
| 701.5-713.5 MHz | 0.077 | 0.1ppm | 4M49G7D | 27 | HC |
| 701.5-713.5 MHz | 0.065 | 0.1ppm | 4M49W7D | 27 | HC |
| 704-711 MHz | 0.075 | 0.1ppm | 8M93G7D | 27 | HC |
| 704-711 MHz | 0.064 | 0.1ppm | 8M96W7D | 27 | HC |
| 729-746 MHz | 15B | CC | |||
| 758-768 MHz | 15B | CC | |||
| 790.5-795.5 MHz | 0.07 | 0.1ppm | 4M48G7D | 9 | HC |
| 790.5-795.5 MHz | 0.058 | 0.1ppm | 4M49W7D | 9 | HC |
| 793 MHz | 0.07 | 0.1ppm | 8M96G7D | 9 | HC |
| 793 MHz | 0.057 | 0.1ppm | 8M95W7D | 9 | HC |
| 826.5-846.5 MHz | 0.079 | 0.1ppm | 4M48G7D | 22H | HC |
| 869-894 MHz | 15B | CC | |||
| 1712.4-1752.6 MHz | 0.187 | 0.1ppm | 4M15F9W | 27 | HC |
| 1712.5-1777.5 MHz | 0.205 | 0.1ppm | 4M48G7D | 27 | HC |
| 1720-1745 MHz | 0.207 | 0.1ppm | 17M9G7D | 27 | HC |
| 1720-1745 MHz | 0.173 | 0.1ppm | 17M9W7D | 27 | HC |
| 1720-1770 MHz | 0.198 | 0.1ppm | 18M0G7D | 27 | HC |
| 1720-1770 MHz | 0.171 | 0.1ppm | 17M9W7D | 27 | HC |
| 1852.4-1907.6 MHz | 0.207 | 0.1ppm | 4M17F9W | 24E | HC |
| 1852.5-1907.5 MHz | 0.239 | 0.1ppm | 4M47G7D | 24E | HC |
| 1852.5-1907.5 MHz | 0.202 | 0.1ppm | 4M50W7D | 24E | HC |
| 1860-1900 MHz | 0.233 | 0.1ppm | 17M9G7D | 24E | HC |
| 1860-1900 MHz | 0.198 | 0.1ppm | 17M9W7D | 24E | HC |
| 2307.5-2312.5 MHz | 0.15 | 0.1ppm | 4M49G7D | 27 | HC |
| 2307.5-2312.5 MHz | 0.125 | 0.1ppm | 4M49W7D | 27 | HC |
| 2310 MHz | 0.148 | 0.1ppm | 8M97G7D | 27 | HC |
| 2310 MHz | 0.123 | 0.1ppm | 8M96W7D | 27 | HC |
| 2402-2480 MHz | 0.0130000 | 15C | CC | ||
| 2402-2480 MHz | 0.001 | 15C | CC | ||
| 2412-2462 MHz | 0.2 | 15C | CC, HC | ||
| 2502.5-2567.5 MHz | 0.212 | 0.1ppm | 4M48G7D | 27 | HC |
| 2502.5-2567.5 MHz | 0.178 | 0.1ppm | 4M49W7D | 27 | HC |
| 2510-2560 MHz | 0.21 | 0.1ppm | 17M9G7D | 27 | HC |
| 2510-2560 MHz | 0.177 | 0.1ppm | 17M9W7D | 27 | HC |
| 5180-5240 MHz | 0.062 | 15E | CC, HC | ||
| 5260-5320 MHz | 0.064 | 15E | CC, HC | ||
| 5500-5700 MHz | 0.058 | 15E | CC, HC | ||
| 5745-5825 MHz | 0.058 | 15E | CC, HC |
Grants
TCB Grant - Application QUIQvPUKKQs6DIQwlCF0tw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 06/11/2023 Application Dated: 06/08/2023 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U380AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | Smart Phone with WCDMA, LTE, WiFi and Bluetooth |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| HC | 22H | 826.4 - 846.6 | 0.058 | 0.1 PM | 4M14F9W |
| HC | 22H | 829.0 - 844.0 | 0.079 | 0.1 PM | 8M93G7D |
| HC | 22H | 829.0 - 844.0 | 0.066 | 0.1 PM | 8M95W7D |
| HC | 22H | 826.5 - 846.5 | 0.079 | 0.1 PM | 4M48G7D |
| HC | 24E | 1852.4 - 1907.6 | 0.207 | 0.1 PM | 4M17F9W |
| HC | 24E | 1860.0 - 1900.0 | 0.233 | 0.1 PM | 17M9G7D |
| HC | 24E | 1860.0 - 1900.0 | 0.198 | 0.1 PM | 17M9W7D |
| HC | 24E | 1852.5 - 1907.5 | 0.239 | 0.1 PM | 4M47G7D |
| HC | 24E | 1852.5 - 1907.5 | 0.202 | 0.1 PM | 4M50W7D |
| HC | 27 | 1712.4 - 1752.6 | 0.187 | 0.1 PM | 4M15F9W |
| HC | 27 | 1720.0 - 1745.0 | 0.207 | 0.1 PM | 17M9G7D |
| HC | 27 | 1720.0 - 1745.0 | 0.173 | 0.1 PM | 17M9W7D |
| HC | 27 | 2510.0 - 2560.0 | 0.21 | 0.1 PM | 17M9G7D |
| HC | 27 | 2510.0 - 2560.0 | 0.177 | 0.1 PM | 17M9W7D |
| HC | 27 | 2502.5 - 2567.5 | 0.212 | 0.1 PM | 4M48G7D |
| HC | 27 | 2502.5 - 2567.5 | 0.178 | 0.1 PM | 4M49W7D |
| HC | 27 | 704.0 - 711.0 | 0.075 | 0.1 PM | 8M93G7D |
| HC | 27 | 704.0 - 711.0 | 0.064 | 0.1 PM | 8M96W7D |
| HC | 27 | 701.5 - 713.5 | 0.077 | 0.1 PM | 4M49G7D |
| HC | 27 | 701.5 - 713.5 | 0.065 | 0.1 PM | 4M49W7D |
| HC | 27 | 2310.0 - 2310.0 | 0.148 | 0.1 PM | 8M97G7D |
| HC | 27 | 2310.0 - 2310.0 | 0.123 | 0.1 PM | 8M96W7D |
| HC | 27 | 2307.5 - 2312.5 | 0.15 | 0.1 PM | 4M49G7D |
| HC | 27 | 2307.5 - 2312.5 | 0.125 | 0.1 PM | 4M49W7D |
| HC | 27 | 1720.0 - 1770.0 | 0.198 | 0.1 PM | 18M0G7D |
| HC | 27 | 1720.0 - 1770.0 | 0.171 | 0.1 PM | 17M9W7D |
| HC | 27 | 1712.5 - 1777.5 | 0.205 | 0.1 PM | 4M48G7D |
| HC | 90 | 793.0 - 793.0 | 0.07 | 0.1 PM | 8M96G7D |
| HC | 90 | 793.0 - 793.0 | 0.057 | 0.1 PM | 8M95W7D |
| HC | 90 | 790.5 - 795.5 | 0.07 | 0.1 PM | 4M48G7D |
| HC | 90 | 790.5 - 795.5 | 0.058 | 0.1 PM | 4M49W7D |
| Output power listed for WCDMA Band 5, LTE Band 5/12/14 are maximum ERP. Output power listed for WCDMA Band 2/4, LTE Band 2/4/7/20/30/66 are maximum EIRP. It supports WCDMA, LTE (QPSK, 16QAM, 64QAM) LTE B2, B4, B5, B7, B12, B14, B20, B30, B66 Channel Bandwidth (5/10 MHz) for LTE B14, B30, Channel Bandwidth (1.4/3/5/10 MHz) for LTE B5, B12, Channel Bandwidth (1.4/3/5/10/15/20 MHz) for LTE B2, B4, B66, Channel Bandwidth (5/10/15/20 MHz) for LTE B7, This device contains functions that are not operational in U.S. Territories; this filing is only applicable for U.S. operations. This device has integrated DTS, DSS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.45 W/kg, 1.17 W/kg, 1.29 W/kg and 1.59 W/kg, respectively. Product specific SAR at 10-gram tissue is 3.41 W/kg. simultaneous transmission use conditions are 3.59 W/kg. The HAC Rating is M4T4-2011. |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
EAS Grant - Application QUIQvPUKKQs6DIQwlCF0tw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 06/11/2023 Application Dated: 06/08/2023 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U380AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | Smart Phone with WCDMA, LTE, WiFi and Bluetooth |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| HC | 22H | 826.4 - 846.6 | 0.058 | 0.1 PM | 4M14F9W |
| HC | 22H | 829.0 - 844.0 | 0.079 | 0.1 PM | 8M93G7D |
| HC | 22H | 829.0 - 844.0 | 0.066 | 0.1 PM | 8M95W7D |
| HC | 22H | 826.5 - 846.5 | 0.079 | 0.1 PM | 4M48G7D |
| HC | 24E | 1852.4 - 1907.6 | 0.207 | 0.1 PM | 4M17F9W |
| HC | 24E | 1860.0 - 1900.0 | 0.233 | 0.1 PM | 17M9G7D |
| HC | 24E | 1860.0 - 1900.0 | 0.198 | 0.1 PM | 17M9W7D |
| HC | 24E | 1852.5 - 1907.5 | 0.239 | 0.1 PM | 4M47G7D |
| HC | 24E | 1852.5 - 1907.5 | 0.202 | 0.1 PM | 4M50W7D |
| HC | 27 | 1712.4 - 1752.6 | 0.187 | 0.1 PM | 4M15F9W |
| HC | 27 | 1720.0 - 1745.0 | 0.207 | 0.1 PM | 17M9G7D |
| HC | 27 | 1720.0 - 1745.0 | 0.173 | 0.1 PM | 17M9W7D |
| HC | 27 | 2510.0 - 2560.0 | 0.21 | 0.1 PM | 17M9G7D |
| HC | 27 | 2510.0 - 2560.0 | 0.177 | 0.1 PM | 17M9W7D |
| HC | 27 | 2502.5 - 2567.5 | 0.212 | 0.1 PM | 4M48G7D |
| HC | 27 | 2502.5 - 2567.5 | 0.178 | 0.1 PM | 4M49W7D |
| HC | 27 | 704.0 - 711.0 | 0.075 | 0.1 PM | 8M93G7D |
| HC | 27 | 704.0 - 711.0 | 0.064 | 0.1 PM | 8M96W7D |
| HC | 27 | 701.5 - 713.5 | 0.077 | 0.1 PM | 4M49G7D |
| HC | 27 | 701.5 - 713.5 | 0.065 | 0.1 PM | 4M49W7D |
| HC | 27 | 2310.0 - 2310.0 | 0.148 | 0.1 PM | 8M97G7D |
| HC | 27 | 2310.0 - 2310.0 | 0.123 | 0.1 PM | 8M96W7D |
| HC | 27 | 2307.5 - 2312.5 | 0.15 | 0.1 PM | 4M49G7D |
| HC | 27 | 2307.5 - 2312.5 | 0.125 | 0.1 PM | 4M49W7D |
| HC | 27 | 1720.0 - 1770.0 | 0.198 | 0.1 PM | 18M0G7D |
| HC | 27 | 1720.0 - 1770.0 | 0.171 | 0.1 PM | 17M9W7D |
| HC | 27 | 1712.5 - 1777.5 | 0.205 | 0.1 PM | 4M48G7D |
| HC | 90 | 793.0 - 793.0 | 0.07 | 0.1 PM | 8M96G7D |
| HC | 90 | 793.0 - 793.0 | 0.057 | 0.1 PM | 8M95W7D |
| HC | 90 | 790.5 - 795.5 | 0.07 | 0.1 PM | 4M48G7D |
| HC | 90 | 790.5 - 795.5 | 0.058 | 0.1 PM | 4M49W7D |
| Output power listed for WCDMA Band 5, LTE Band 5/12/14 are maximum ERP. Output power listed for WCDMA Band 2/4, LTE Band 2/4/7/20/30/66 are maximum EIRP. It supports WCDMA, LTE (QPSK, 16QAM, 64QAM) LTE B2, B4, B5, B7, B12, B14, B20, B30, B66 Channel Bandwidth (5/10 MHz) for LTE B14, B30, Channel Bandwidth (1.4/3/5/10 MHz) for LTE B5, B12, Channel Bandwidth (1.4/3/5/10/15/20 MHz) for LTE B2, B4, B66, Channel Bandwidth (5/10/15/20 MHz) for LTE B7, This device contains functions that are not operational in U.S. Territories; this filing is only applicable for U.S. operations. This device has integrated DTS, DSS, NII and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.45 W/kg, 1.17 W/kg, 1.29 W/kg and 1.59 W/kg, respectively. Product specific SAR at 10-gram tissue is 3.41 W/kg. simultaneous transmission use conditions are 3.59 W/kg. The HAC Rating is M4T4-2011. |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 06/11/2023 Application Dated: 06/08/2023 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U380AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Smart Phone with WCDMA, LTE, WiFi and Bluetooth |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application JgvUIZOMPJbD7mJ7mpqZuQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 06/11/2023 Application Dated: 06/08/2023 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U380AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Smart Phone with WCDMA, LTE, WiFi and Bluetooth |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 06/11/2023 Application Dated: 06/08/2023 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U380AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart Phone with WCDMA, LTE, WiFi and Bluetooth |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 | ||
| CC HC | 15C | 2412.0 - 2462.0 | 0.2 |
| Output power is maximum peak conducted. This device has integrated DSS, DTS, NII, and PCE transmitters certified under the same FCC ID. This device supports WIFI 802.11 b/g/n20 and 40 MHz channel bandwidth. SAR compliance for body-worn operating configurations is limited to the belt- clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 1.11 W/kg, 0.25 W/kg, 0.63 W/kg and 1.59 W/kg, respectively. The HAC Rating is M4T4-2011. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
EAS Grant - Application gCL+/w8M/AqeHvKLmK7ysA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 06/11/2023 Application Dated: 06/08/2023 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U380AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart Phone with WCDMA, LTE, WiFi and Bluetooth |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 | ||
| CC HC | 15C | 2412.0 - 2462.0 | 0.2 |
| Output power is maximum peak conducted. This device has integrated DSS, DTS, NII, and PCE transmitters certified under the same FCC ID. This device supports WIFI 802.11 b/g/n20 and 40 MHz channel bandwidth. SAR compliance for body-worn operating configurations is limited to the belt- clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 1.11 W/kg, 0.25 W/kg, 0.63 W/kg and 1.59 W/kg, respectively. The HAC Rating is M4T4-2011. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 06/11/2023 Application Dated: 06/08/2023 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U380AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Smart Phone with WCDMA, LTE, WiFi and Bluetooth |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC HC | 15E | 5180.0 - 5240.0 | 0.062 | ||
| CC HC | 15E | 5260.0 - 5320.0 | 0.064 | ||
| CC HC | 15E | 5500.0 - 5700.0 | 0.058 | ||
| CC HC | 15E | 5745.0 - 5825.0 | 0.058 |
| Output power is maximum average conducted. This device has integrated DSS, DTS, NII, and PCE transmitters certified under the same FCC ID. This device supports WIFI 802.11 a/n/ac and 20/40/80 MHz channel bandwidth. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 1.22 W/kg, 0.31 W/kg, 1.05 W/kg and 1.59 W/kg, respectively. Product specific SAR at 10-gram tissue is 1.29 W/kg. simultaneous transmission use conditions are 3.59 W/kg. The HAC Rating is M4T4-2011. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
EAS Grant - Application dSbMcEJpfqJF9WjEzwevMQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 06/11/2023 Application Dated: 06/08/2023 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U380AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Smart Phone with WCDMA, LTE, WiFi and Bluetooth |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC HC | 15E | 5180.0 - 5240.0 | 0.062 | ||
| CC HC | 15E | 5260.0 - 5320.0 | 0.064 | ||
| CC HC | 15E | 5500.0 - 5700.0 | 0.058 | ||
| CC HC | 15E | 5745.0 - 5825.0 | 0.058 |
| Output power is maximum average conducted. This device has integrated DSS, DTS, NII, and PCE transmitters certified under the same FCC ID. This device supports WIFI 802.11 a/n/ac and 20/40/80 MHz channel bandwidth. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 1.22 W/kg, 0.31 W/kg, 1.05 W/kg and 1.59 W/kg, respectively. Product specific SAR at 10-gram tissue is 1.29 W/kg. simultaneous transmission use conditions are 3.59 W/kg. The HAC Rating is M4T4-2011. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| HC: | This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 06/13/2023 Application Dated: 06/13/2023 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U380AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Communications Rcvr for use w/ licensed Tx and CBs |
| Notes: | Smart Phone with WCDMA, LTE, WiFi and Bluetooth |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | 869.0 - 894.0 | |||
| CC | 15B | 729.0 - 746.0 | |||
| CC | 15B | 758.0 - 768.0 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 9rqcD9/Co5eqxaaZWtpfvA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 06/13/2023 Application Dated: 06/13/2023 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U380AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Communications Rcvr for use w/ licensed Tx and CBs |
| Notes: | Smart Phone with WCDMA, LTE, WiFi and Bluetooth |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | 869.0 - 894.0 | |||
| CC | 15B | 729.0 - 746.0 | |||
| CC | 15B | 758.0 - 768.0 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 06/11/2023 Application Dated: 06/08/2023 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U380AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart Phone with WCDMA, LTE, WiFi and Bluetooth |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Output power is maximum peak conducted. This device has integrated DSS, DTS, NII, and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt- clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.11 W/kg, <0.10 W/kg, <0.10 W/kg and 1.59 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +lnLzSRP5L9CujwP9FKFNQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 06/11/2023 Application Dated: 06/08/2023 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6U380AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Smart Phone with WCDMA, LTE, WiFi and Bluetooth |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Output power is maximum peak conducted. This device has integrated DSS, DTS, NII, and PCE transmitters certified under the same FCC ID. SAR compliance for body-worn operating configurations is limited to the belt- clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.11 W/kg, <0.10 W/kg, <0.10 W/kg and 1.59 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |