FCC ID XD6UM200AA
4G MIFI
by Shenzhen Tinno Mobile Technology Corp
Grantee Code: XD6 Product Code: UM200AA
Latest application date: 2021-04-17
FCC ID Device Details
Linked Records
Barcode records decoded from published FCC label exhibits or linked by an explicit FCC ID reference on a product page.
| UPC / GTIN | Linked product |
|---|---|
| 188000190980 UPC-A · GTIN-14 00188000190980 | 4G MIFI UM200AA Brand: Shenzhen Tinno Mobile Technology Corp · Model: UM200AA Source: FCC label |
| 13368601527840 GTIN-14 | 4G MIFI UM200AA Brand: Shenzhen Tinno Mobile Technology Corp · Model: UM200AA Source: FCC label |
| 82208521162090 GTIN-14 | 4G MIFI UM200AA Brand: Shenzhen Tinno Mobile Technology Corp · Model: UM200AA Source: FCC label |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 700.5-714.5 MHz | Class II permissive change or modification of presently authorized equipment | 2021-04-17 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2021-04-17 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-04-17 |
| 729-746 MHz | Class II permissive change or modification of presently authorized equipment | 2021-04-17 |
| 5180-5240 MHz | Original Equipment | 2021-04-01 |
| 2412-2462 MHz | Original Equipment | 2021-04-01 |
| 729-746 MHz | Original Equipment | 2021-04-01 |
| 700.5-714.5 MHz | Original Equipment | 2021-04-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| ATT_Deacon_UG_EN_V2d 0226 | Users Manual | 2021-09-29 | PDF 2.8 MB |
| TempConfidential_UM200AA EUT Photos_Internal | Internal Photos | 2021-10-13 | PDF 2 MB |
| TempConfidential_UM200AA EUT Photos_Internal | Internal Photos | 2021-09-29 | PDF 3 MB |
| TempConfidential_UM200AA EUT Photos_External | External Photos | 2021-09-29 | PDF 1.3 MB |
| UM200AA Label Location | ID Label/Location Info | 2021-04-17 | PDF 108.8 KB |
| UM200AA Label Location | ID Label/Location Info | 2021-04-01 | PDF 109 KB |
| TempConfidential_The Photos of SAR test-I21Z60407 | Test Setup Photos | 2021-10-13 | PDF 916.5 KB |
| TempConfidential_Test Setup Photos | Test Setup Photos | 2021-09-29 | PDF 478.9 KB |
| TempConfidential_The Photos of SAR test-I21Z60214 | Test Setup Photos | 2021-09-29 | PDF 915.9 KB |
| I21Z60407-EMC01_FCC 15B_Rev1 | Test Report | 2021-04-17 | PDF 800.5 KB |
| I21Z60407-WMD01_Part22242790_LTE_Rev1 | Test Report | 2021-04-17 | PDF 2.7 MB |
| I21Z60214-EMC01_FCC 15B_Rev0 | Test Report | 2021-04-01 | PDF 503 KB |
| I21Z60214-IOT01_FCC_Report_WLAN_2.4G_Rev1_Part1 | Test Report | 2021-04-01 | PDF 4.9 MB |
| I21Z60214-IOT01_FCC_Report_WLAN_2.4G_Rev1_Part2 | Test Report | 2021-04-01 | PDF 4.2 MB |
| I21Z60214-IOT02_FCC_Report_WLAN 5.0G_Rev1 | Test Report | 2021-04-01 | PDF 5.1 MB |
| I21Z60214-IOT03_FCC_Report_WLAN 5.8G_Rev1 | Test Report | 2021-04-01 | PDF 1.7 MB |
| I21Z60214-IOT04_FCC Report_DFS-Rev1 | Test Report | 2021-04-01 | PDF 4.3 MB |
| I21Z60214-WMD01_Part22242790_LTE_Rev1 | Test Report | 2021-04-01 | PDF 2.7 MB |
| FCC Authorization Letter_0301 | Cover Letter(s) | 2021-04-17 | PDF 72.1 KB |
| FCC Confidentiality Request Letter_0408 | Cover Letter(s) | 2021-04-17 | PDF 25.7 KB |
| FCC cover letter_C2PC letter_UM200AA_20210406 | Cover Letter(s) | 2021-04-17 | PDF 51.4 KB |
| Request for Sharing_r1 | Cover Letter(s) | 2021-04-17 | PDF 119.1 KB |
| Declaration letter for WLAN ch12_13_0301 | Cover Letter(s) | 2021-04-01 | PDF 29.6 KB |
| FCC Confidentiality Request Letter_0301 | Cover Letter(s) | 2021-04-01 | PDF 115.2 KB |
| I21Z60407-SEM01_SAR_Rev2_Part1 | RF Exposure Info | 2021-04-17 | PDF 3.1 MB |
| I21Z60407-SEM01_SAR_Rev2_Part2 | RF Exposure Info | 2021-04-17 | PDF 5.6 MB |
| I21Z60407-SEM01_SAR_Rev2_Part3 | RF Exposure Info | 2021-04-17 | PDF 4.3 MB |
| I21Z60407-SEM01_SAR_Rev2_Part4 | RF Exposure Info | 2021-04-17 | PDF 5 MB |
| I21Z60214-SEM01_SAR_Rev0_Part1 Metadata only | RF Exposure Info | 2021-04-01 | PDF 4.6 MB |
| I21Z60214-SEM01_SAR_Rev0_Part2 Metadata only | RF Exposure Info | 2021-04-01 | PDF 5.6 MB |
| I21Z60214-SEM01_SAR_Rev0_Part3 Metadata only | RF Exposure Info | 2021-04-01 | PDF 5.4 MB |
| I21Z60214-SEM01_SAR_Rev0_Part4 Metadata only | RF Exposure Info | 2021-04-01 | PDF 1.2 MB |
| I21Z60214-SEM01_SAR_Rev2_part 1 | RF Exposure Info | 2021-04-01 | PDF 3.5 MB |
| I21Z60214-SEM01_SAR_Rev2_part 2 | RF Exposure Info | 2021-04-01 | PDF 4.4 MB |
| I21Z60214-SEM01_SAR_Rev2_part3 | RF Exposure Info | 2021-04-01 | PDF 5 MB |
| I21Z60214-SEM01_SAR_Rev2_part4 | RF Exposure Info | 2021-04-01 | PDF 4.9 MB |
| Confidential_UM200AA_Block Diagram_V2.0_20210309 Metadata only | Block Diagram | PDF 241.6 KB | |
| Confidential_UM200AA_Qualcomm_MB_V1.0_20201221_1442 Metadata only | Schematics | PDF 873.8 KB | |
| Confidential_UM200AA_Qualcomm_MB_V1.2_20210118_1512 Metadata only | Schematics | PDF 877.7 KB | |
| Confidential_UM200AA_Qualcomm_MB_V1.2_20210118_1512_r1 Metadata only | Schematics | PDF 344.4 KB | |
| Confidential_Operationdescription-UM200AA_V3_20210310 Metadata only | Operational Description | PDF 345.1 KB | |
| Confidential_Operationdescription-UM200AA_V3_20210312 Metadata only | Operational Description | PDF 346 KB | |
| Confidential_Operationdescription-UM200AA_V4_20210317 Metadata only | Operational Description | PDF 345.4 KB | |
| Confidential_Operationdescription-UM200AA_V5_20210331 Metadata only | Operational Description | PDF 345.5 KB | |
| Confidential_UM200AA Antenna Gain_V2_20210205 Metadata only | Operational Description | PDF 1.3 MB | |
| Confidential_UM200AA_V1.0_gerber_Add soldering mask Metadata only | Operational Description | PDF 5.3 MB | |
| Confidential_UM200AA_V1.2_gerber_Add soldering mask Metadata only | Operational Description | PDF 1.8 MB | |
| HW SW change note for UM200AA_HW 1.2_0301 Metadata only | Operational Description | PDF 28.2 KB | |
| UM200AA_Device SW security statement letter_Template_0304 Metadata only | Operational Description | PDF 114.2 KB | |
| Confidential_UM200AA tune up Procedure_V2_20210222 Metadata only | Parts List/Tune Up Info | PDF 221 KB | |
| Confidential_UM200AA-EBOM-1M7B-2 1_20210303 Metadata only | Parts List/Tune Up Info | PDF 109.9 KB |
Application Information
| Application ID | xHBRN8uFnUzFi8zoYlqkdw== |
|---|---|
| Final Action Date | 2021-04-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018783100 |
| Model | UM200AA |
| Frequency Range | 700.5-714.5 MHz |
| Equipment Class | PCT - PCS Licensed Transmitter worn on body |
| Device Description | 4G MIFI |
| Responsible Party | xiaoping LI, Manager, xiaoping.li@tinno.com  , (86) 755-86095550 |
| Technical Contact | Zhen Xue, CTTL, Telecommunication Technology Labs, CAICT, xuezhen@caict.ac.cn  , 86-10-62304633 |
| Test Firm | Yaqin Shen, Telecommunication Technology Labs, CAICT, shenyaqin@caict.ac.cn , 8610-62304633 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/13/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power output is ERP for Part 22/27/90 and EIRP for Part 24/27. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.97 W/kg, 0.97 W/kg and 1.49 W/kg, respectively. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12 and 5 MHz and 10 MHz bandwidth modes for LTE Bands 14/30. This device also contains 2.4GHz and 5GHz WLAN transmitters. Class II Permissive Change by some hardware modifications as documented in this filing. The highest reported SAR remains the same as initial filing presented. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| xHBRN8uFnUzFi8zoYlqkdw== | 2021-04-17 | Class II permissive change or modification of presently authorized equipment |
| teTq6ojtSeZXTe8/vQNQ7A== | 2021-04-17 | Class II permissive change or modification of presently authorized equipment |
| XVZ2qUV3Geo/VmYdIvUmdQ== | 2021-04-17 | Class II permissive change or modification of presently authorized equipment |
| FQfGWkUdBaZ5dH8kQ0zoIQ== | 2021-04-17 | Class II permissive change or modification of presently authorized equipment |
| +UlvFX/JfRT4vIpsZfKwzQ== | 2021-04-17 | Class II permissive change or modification of presently authorized equipment |
| qr6cNCewZD5CBcbfxsxmXg== | 2021-04-01 | Original Equipment |
| nQqyPymE045/taVwCLj5rw== | 2021-04-01 | Original Equipment |
| gjyi4ZvFgwM7Br/xDn1JYw== | 2021-04-01 | Original Equipment |
| SLTSmrZm2SI8nlRlHvp/BA== | 2021-04-01 | Original Equipment |
| PZlUcTq0dncYRBQV8tyJnw== | 2021-04-01 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 15B | CC | ||||
| 700.5-714.5 MHz | 0.1285 | 0.1ppm | 2M69G7D | 27 | BC |
| 704-711 MHz | 0.1199 | 0.1ppm | 8M94G7D | 27 | BC |
| 704-711 MHz | 0.1076 | 0.1ppm | 8M94W7D | 27 | BC |
| 729-746 MHz | 15B | CC | |||
| 758-768 MHz | 15B | CC | |||
| 793 MHz | 0.1637 | 0.1ppm | 8M94G7D | 9 | BC |
| 793 MHz | 0.1271 | 0.1ppm | 8M94W7D | 9 | BC |
| 824.7-848.3 MHz | 0.16 | 0.1ppm | 1M09W7D | 22H | BC |
| 825.5-847.5 MHz | 0.1884 | 0.1ppm | 2M69G7D | 22H | BC |
| 829-844 MHz | 0.1879 | 0.1ppm | 8M94G7D | 22H | BC |
| 829-844 MHz | 0.1452 | 0.1ppm | 8M99W7D | 22H | BC |
| 869-894 MHz | 15B | CC | |||
| 1711.5-1778.5 MHz | 0.2051 | 0.1ppm | 2M69G7D | 27 | BC |
| 1717.5-1772.5 MHz | 0.1807 | 0.1ppm | 13M5W7D | 27 | BC |
| 1720-1770 MHz | 0.1901 | 0.1ppm | 18M0G7D | 27 | BC |
| 1720-1770 MHz | 0.1592 | 0.1ppm | 17M9W7D | 27 | BC |
| 1857.5-1902.5 MHz | 0.1746 | 0.1ppm | 13M5W7D | 24E | BC |
| 1860-1900 MHz | 0.1633 | 0.1ppm | 17M9W7D | 24E | BC |
| 2307.5-2312.5 MHz | 0.1722 | 0.1ppm | 4M50G7D | 27 | BC |
| 2307.5-2312.5 MHz | 0.1387 | 0.1ppm | 4M50W7D | 27 | BC |
| 2310 MHz | 0.1702 | 0.1ppm | 8M99G7D | 27 | BC |
| 2310 MHz | 0.1256 | 0.1ppm | 8M94W7D | 27 | BC |
| 2412-2462 MHz | 0.1466000 | 15C | CC | ||
| 5180-5240 MHz | 0.0157 | 15E | CC | ||
| 5260-5320 MHz | 0.0152 | 15E | CC, ND | ||
| 5500-5720 MHz | 0.0173 | 15E | CC, ND | ||
| 5745-5825 MHz | 0.018 | 15E | CC |
Grants
TCB Grant - Application XVZ2qUV3Geo/VmYdIvUmdQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/17/2021 Application Dated: 04/14/2021 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Part 15 Class B Digital Device |
| Notes: | 4G MIFI |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| This device contains LTE and 2.4GHz/5GHz WLAN transmitters. Class II Permissive Change by some hardware modifications as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application XVZ2qUV3Geo/VmYdIvUmdQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 04/17/2021 Application Dated: 04/14/2021 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Part 15 Class B Digital Device |
| Notes: | 4G MIFI |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| This device contains LTE and 2.4GHz/5GHz WLAN transmitters. Class II Permissive Change by some hardware modifications as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/17/2021 Application Dated: 04/14/2021 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | PCS Licensed Transmitter worn on body |
| Notes: | 4G MIFI |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 24E | 1855.0 - 1905.0 | 0.2218 | 0.1 PM | 8M99G7D |
| BC | 24E | 1860.0 - 1900.0 | 0.2153 | 0.1 PM | 17M9G7D |
| BC | 24E | 1857.5 - 1902.5 | 0.1746 | 0.1 PM | 13M5W7D |
| BC | 24E | 1860.0 - 1900.0 | 0.1633 | 0.1 PM | 17M9W7D |
| BC | 22H | 825.5 - 847.5 | 0.1884 | 0.1 PM | 2M69G7D |
| BC | 22H | 829.0 - 844.0 | 0.1879 | 0.1 PM | 8M94G7D |
| BC | 22H | 824.7 - 848.3 | 0.16 | 0.1 PM | 1M09W7D |
| BC | 22H | 829.0 - 844.0 | 0.1452 | 0.1 PM | 8M99W7D |
| BC | 27 | 700.5 - 714.5 | 0.1285 | 0.1 PM | 2M69G7D |
| BC | 27 | 704.0 - 711.0 | 0.1199 | 0.1 PM | 8M94G7D |
| BC | 27 | 704.0 - 711.0 | 0.1076 | 0.1 PM | 8M94W7D |
| BC | 90 | 793.0 - 793.0 | 0.1637 | 0.1 PM | 8M94G7D |
| BC | 90 | 793.0 - 793.0 | 0.1271 | 0.1 PM | 8M94W7D |
| BC | 27 | 2307.5 - 2312.5 | 0.1722 | 0.1 PM | 4M50G7D |
| BC | 27 | 2310.0 - 2310.0 | 0.1702 | 0.1 PM | 8M99G7D |
| BC | 27 | 2307.5 - 2312.5 | 0.1387 | 0.1 PM | 4M50W7D |
| BC | 27 | 2310.0 - 2310.0 | 0.1256 | 0.1 PM | 8M94W7D |
| BC | 27 | 1711.5 - 1778.5 | 0.2051 | 0.1 PM | 2M69G7D |
| BC | 27 | 1720.0 - 1770.0 | 0.1901 | 0.1 PM | 18M0G7D |
| BC | 27 | 1717.5 - 1772.5 | 0.1807 | 0.1 PM | 13M5W7D |
| BC | 27 | 1720.0 - 1770.0 | 0.1592 | 0.1 PM | 17M9W7D |
| Power output is ERP for Part 22/27/90 and EIRP for Part 24/27. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.97 W/kg, 0.97 W/kg and 1.49 W/kg, respectively. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12 and 5 MHz and 10 MHz bandwidth modes for LTE Bands 14/30. This device also contains 2.4GHz and 5GHz WLAN transmitters. Class II Permissive Change by some hardware modifications as documented in this filing. The highest reported SAR remains the same as initial filing presented. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
EAS Grant - Application xHBRN8uFnUzFi8zoYlqkdw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 04/17/2021 Application Dated: 04/14/2021 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | PCS Licensed Transmitter worn on body |
| Notes: | 4G MIFI |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 24E | 1855.0 - 1905.0 | 0.2218 | 0.1 PM | 8M99G7D |
| BC | 24E | 1860.0 - 1900.0 | 0.2153 | 0.1 PM | 17M9G7D |
| BC | 24E | 1857.5 - 1902.5 | 0.1746 | 0.1 PM | 13M5W7D |
| BC | 24E | 1860.0 - 1900.0 | 0.1633 | 0.1 PM | 17M9W7D |
| BC | 22H | 825.5 - 847.5 | 0.1884 | 0.1 PM | 2M69G7D |
| BC | 22H | 829.0 - 844.0 | 0.1879 | 0.1 PM | 8M94G7D |
| BC | 22H | 824.7 - 848.3 | 0.16 | 0.1 PM | 1M09W7D |
| BC | 22H | 829.0 - 844.0 | 0.1452 | 0.1 PM | 8M99W7D |
| BC | 27 | 700.5 - 714.5 | 0.1285 | 0.1 PM | 2M69G7D |
| BC | 27 | 704.0 - 711.0 | 0.1199 | 0.1 PM | 8M94G7D |
| BC | 27 | 704.0 - 711.0 | 0.1076 | 0.1 PM | 8M94W7D |
| BC | 90 | 793.0 - 793.0 | 0.1637 | 0.1 PM | 8M94G7D |
| BC | 90 | 793.0 - 793.0 | 0.1271 | 0.1 PM | 8M94W7D |
| BC | 27 | 2307.5 - 2312.5 | 0.1722 | 0.1 PM | 4M50G7D |
| BC | 27 | 2310.0 - 2310.0 | 0.1702 | 0.1 PM | 8M99G7D |
| BC | 27 | 2307.5 - 2312.5 | 0.1387 | 0.1 PM | 4M50W7D |
| BC | 27 | 2310.0 - 2310.0 | 0.1256 | 0.1 PM | 8M94W7D |
| BC | 27 | 1711.5 - 1778.5 | 0.2051 | 0.1 PM | 2M69G7D |
| BC | 27 | 1720.0 - 1770.0 | 0.1901 | 0.1 PM | 18M0G7D |
| BC | 27 | 1717.5 - 1772.5 | 0.1807 | 0.1 PM | 13M5W7D |
| BC | 27 | 1720.0 - 1770.0 | 0.1592 | 0.1 PM | 17M9W7D |
| Power output is ERP for Part 22/27/90 and EIRP for Part 24/27. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.97 W/kg, 0.97 W/kg and 1.49 W/kg, respectively. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12 and 5 MHz and 10 MHz bandwidth modes for LTE Bands 14/30. This device also contains 2.4GHz and 5GHz WLAN transmitters. Class II Permissive Change by some hardware modifications as documented in this filing. The highest reported SAR remains the same as initial filing presented. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/17/2021 Application Dated: 04/14/2021 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Digital Transmission System |
| Notes: | 4G MIFI |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1466 |
| Power output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly . End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.54 W/kg, 0.54 W/kg, and 1.43 W/kg, respectively. This device contains LTE and 5GHz WLAN transmitters. Class II Permissive Change by some hardware modifications as documented in this filing. The highest reported SAR remains the same as initial filing presented. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application teTq6ojtSeZXTe8/vQNQ7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 04/17/2021 Application Dated: 04/14/2021 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Digital Transmission System |
| Notes: | 4G MIFI |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1466 |
| Power output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly . End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.54 W/kg, 0.54 W/kg, and 1.43 W/kg, respectively. This device contains LTE and 5GHz WLAN transmitters. Class II Permissive Change by some hardware modifications as documented in this filing. The highest reported SAR remains the same as initial filing presented. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/01/2021 Application Dated: 03/10/2021 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Communications Rcvr for use w/ licensed Tx and CBs |
| Notes: | 4G MIFI |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | 729.0 - 746.0 | |||
| CC | 15B | 758.0 - 768.0 | |||
| CC | 15B | 869.0 - 894.0 |
| This device contains LTE and 2.4GHz/5GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application SLTSmrZm2SI8nlRlHvp/BA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 04/01/2021 Application Dated: 03/10/2021 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Communications Rcvr for use w/ licensed Tx and CBs |
| Notes: | 4G MIFI |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | 729.0 - 746.0 | |||
| CC | 15B | 758.0 - 768.0 | |||
| CC | 15B | 869.0 - 894.0 |
| This device contains LTE and 2.4GHz/5GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/01/2021 Application Dated: 03/10/2021 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 4G MIFI |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0157 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0152 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.0173 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.018 |
| Power output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly . End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.53 W/kg, 0.53 W/kg, and 1.49W/kg, respectively. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode and it contains LTE and 2.4GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application qr6cNCewZD5CBcbfxsxmXg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 04/01/2021 Application Dated: 03/10/2021 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 4G MIFI |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0157 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0152 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.0173 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.018 |
| Power output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly . End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.53 W/kg, 0.53 W/kg, and 1.49W/kg, respectively. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode and it contains LTE and 2.4GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/01/2021 Application Dated: 03/10/2021 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | PCS Licensed Transmitter worn on body |
| Notes: | 4G MIFI |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 24E | 1855.0 - 1905.0 | 0.2218 | 0.1 PM | 8M99G7D |
| BC | 24E | 1860.0 - 1900.0 | 0.2153 | 0.1 PM | 17M9G7D |
| BC | 24E | 1857.5 - 1902.5 | 0.1746 | 0.1 PM | 13M5W7D |
| BC | 24E | 1860.0 - 1900.0 | 0.1633 | 0.1 PM | 17M9W7D |
| BC | 22H | 825.5 - 847.5 | 0.1884 | 0.1 PM | 2M69G7D |
| BC | 22H | 829.0 - 844.0 | 0.1879 | 0.1 PM | 8M94G7D |
| BC | 22H | 824.7 - 848.3 | 0.16 | 0.1 PM | 1M09W7D |
| BC | 22H | 829.0 - 844.0 | 0.1452 | 0.1 PM | 8M99W7D |
| BC | 27 | 700.5 - 714.5 | 0.1285 | 0.1 PM | 2M69G7D |
| BC | 27 | 704.0 - 711.0 | 0.1199 | 0.1 PM | 8M94G7D |
| BC | 27 | 704.0 - 711.0 | 0.1076 | 0.1 PM | 8M94W7D |
| BC | 90 | 793.0 - 793.0 | 0.1637 | 0.1 PM | 8M94G7D |
| BC | 90 | 793.0 - 793.0 | 0.1271 | 0.1 PM | 8M94W7D |
| BC | 27 | 2307.5 - 2312.5 | 0.1722 | 0.1 PM | 4M50G7D |
| BC | 27 | 2310.0 - 2310.0 | 0.1702 | 0.1 PM | 8M99G7D |
| BC | 27 | 2307.5 - 2312.5 | 0.1387 | 0.1 PM | 4M50W7D |
| BC | 27 | 2310.0 - 2310.0 | 0.1256 | 0.1 PM | 8M94W7D |
| BC | 27 | 1711.5 - 1778.5 | 0.2051 | 0.1 PM | 2M69G7D |
| BC | 27 | 1720.0 - 1770.0 | 0.1901 | 0.1 PM | 18M0G7D |
| BC | 27 | 1717.5 - 1772.5 | 0.1807 | 0.1 PM | 13M5W7D |
| BC | 27 | 1720.0 - 1770.0 | 0.1592 | 0.1 PM | 17M9W7D |
| Power output is ERP for Part 22/27/90 and EIRP for Part 24/27. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.97 W/kg, 0.97 W/kg and 1.49 W/kg, respectively. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12 and 5 MHz and 10 MHz bandwidth modes for LTE Bands 14/30. This device also contains 2.4GHz and 5GHz WLAN transmitters. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
EAS Grant - Application PZlUcTq0dncYRBQV8tyJnw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 04/01/2021 Application Dated: 03/10/2021 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | PCS Licensed Transmitter worn on body |
| Notes: | 4G MIFI |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 24E | 1855.0 - 1905.0 | 0.2218 | 0.1 PM | 8M99G7D |
| BC | 24E | 1860.0 - 1900.0 | 0.2153 | 0.1 PM | 17M9G7D |
| BC | 24E | 1857.5 - 1902.5 | 0.1746 | 0.1 PM | 13M5W7D |
| BC | 24E | 1860.0 - 1900.0 | 0.1633 | 0.1 PM | 17M9W7D |
| BC | 22H | 825.5 - 847.5 | 0.1884 | 0.1 PM | 2M69G7D |
| BC | 22H | 829.0 - 844.0 | 0.1879 | 0.1 PM | 8M94G7D |
| BC | 22H | 824.7 - 848.3 | 0.16 | 0.1 PM | 1M09W7D |
| BC | 22H | 829.0 - 844.0 | 0.1452 | 0.1 PM | 8M99W7D |
| BC | 27 | 700.5 - 714.5 | 0.1285 | 0.1 PM | 2M69G7D |
| BC | 27 | 704.0 - 711.0 | 0.1199 | 0.1 PM | 8M94G7D |
| BC | 27 | 704.0 - 711.0 | 0.1076 | 0.1 PM | 8M94W7D |
| BC | 90 | 793.0 - 793.0 | 0.1637 | 0.1 PM | 8M94G7D |
| BC | 90 | 793.0 - 793.0 | 0.1271 | 0.1 PM | 8M94W7D |
| BC | 27 | 2307.5 - 2312.5 | 0.1722 | 0.1 PM | 4M50G7D |
| BC | 27 | 2310.0 - 2310.0 | 0.1702 | 0.1 PM | 8M99G7D |
| BC | 27 | 2307.5 - 2312.5 | 0.1387 | 0.1 PM | 4M50W7D |
| BC | 27 | 2310.0 - 2310.0 | 0.1256 | 0.1 PM | 8M94W7D |
| BC | 27 | 1711.5 - 1778.5 | 0.2051 | 0.1 PM | 2M69G7D |
| BC | 27 | 1720.0 - 1770.0 | 0.1901 | 0.1 PM | 18M0G7D |
| BC | 27 | 1717.5 - 1772.5 | 0.1807 | 0.1 PM | 13M5W7D |
| BC | 27 | 1720.0 - 1770.0 | 0.1592 | 0.1 PM | 17M9W7D |
| Power output is ERP for Part 22/27/90 and EIRP for Part 24/27. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.97 W/kg, 0.97 W/kg and 1.49 W/kg, respectively. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12 and 5 MHz and 10 MHz bandwidth modes for LTE Bands 14/30. This device also contains 2.4GHz and 5GHz WLAN transmitters. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/01/2021 Application Dated: 03/10/2021 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Digital Transmission System |
| Notes: | 4G MIFI |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1466 |
| Power output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly . End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.54 W/kg, 0.54 W/kg, and 1.43 W/kg, respectively. This device contains LTE and 5GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application nQqyPymE045/taVwCLj5rw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 04/01/2021 Application Dated: 03/10/2021 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Digital Transmission System |
| Notes: | 4G MIFI |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1466 |
| Power output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly . End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.54 W/kg, 0.54 W/kg, and 1.43 W/kg, respectively. This device contains LTE and 5GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/01/2021 Application Dated: 03/10/2021 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Part 15 Class B Digital Device |
| Notes: | 4G MIFI |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| This device contains LTE and 2.4GHz/5GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application gjyi4ZvFgwM7Br/xDn1JYw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 04/01/2021 Application Dated: 03/10/2021 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Part 15 Class B Digital Device |
| Notes: | 4G MIFI |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| This device contains LTE and 2.4GHz/5GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/17/2021 Application Dated: 04/14/2021 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 4G MIFI |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0157 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0152 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.0173 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.018 |
| Power output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly . End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.53 W/kg, 0.53 W/kg, and 1.49W/kg, respectively. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode and it contains LTE and 2.4GHz WLAN transmitters. Class II Permissive Change by some hardware modifications as documented in this filing. The highest reported SAR remains the same as initial filing presented. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application FQfGWkUdBaZ5dH8kQ0zoIQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 04/17/2021 Application Dated: 04/14/2021 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 4G MIFI |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0157 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0152 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.0173 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.018 |
| Power output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly . End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.53 W/kg, 0.53 W/kg, and 1.49W/kg, respectively. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode and it contains LTE and 2.4GHz WLAN transmitters. Class II Permissive Change by some hardware modifications as documented in this filing. The highest reported SAR remains the same as initial filing presented. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/17/2021 Application Dated: 04/14/2021 |
| Shenzhen Tinno Mobile Technology Corp |
| TINNO HQ Building,Tongfa South Road |
| Nanshan District |
| Shenzhen,Guangdong Province, 518000 China |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Communications Rcvr for use w/ licensed Tx and CBs |
| Notes: | 4G MIFI |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | 729.0 - 746.0 | |||
| CC | 15B | 758.0 - 768.0 | |||
| CC | 15B | 869.0 - 894.0 |
| This device contains LTE and 2.4GHz/5GHz WLAN transmitters. Class II Permissive Change by some hardware modifications as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +UlvFX/JfRT4vIpsZfKwzQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Tinno Mobile Technology Corp TINNO HQ Building,Tongfa South Road Nanshan District Shenzhen,Guangdong Province, 518000 China |
Date of Grant: 04/17/2021 Application Dated: 04/14/2021 |
| Attention: xiaoping LI , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XD6UM200AA |
| Name of Grantee: | Shenzhen Tinno Mobile Technology Corp |
| Equipment Class: | Communications Rcvr for use w/ licensed Tx and CBs |
| Notes: | 4G MIFI |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | 729.0 - 746.0 | |||
| CC | 15B | 758.0 - 768.0 | |||
| CC | 15B | 869.0 - 894.0 |
| This device contains LTE and 2.4GHz/5GHz WLAN transmitters. Class II Permissive Change by some hardware modifications as documented in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |