1. FCC ID
  2. XD6
  3. XD6V461C

FCC ID XD6V461C

Smart Phone

by Shenzhen Tinno Mobile Technology Corp

Grantee Code: XD6   Product Code: V461C
Latest application date: 2024-07-31

FCC ID Device Details

FCC IDXD6V461C
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXD6
Product CodeV461C
Applicant BusinessShenzhen Tinno Mobile Technology Corp 🇨🇳
Related Domains tinno.com
Equipment ClassSmart Phone
Test FirmShenzhen Morlab Communications Technology Co. Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2024-07-31
673-688 MHzOriginal Equipment2024-07-31
2402-2480 MHzOriginal Equipment2024-07-31

Exhibits

DocumentTypeAvailableFile
User_ManualUsers Manual2025-01-20PDF 1.6 MB
Internal_PhotoInternal Photos2025-01-20PDF 3.2 MB
External_PhotoExternal Photos2025-01-20PDF 1.2 MB
LabelID Label/Location Info2024-07-31PDF 282 KB
Test_Setuo_PhotoTest Setup Photos2025-01-20PDF 689.3 KB
Test_Setuo_PhotoTest Setup Photos2025-01-20PDF 656.4 KB
Test_Setuo_PhotoTest Setup Photos2025-01-20PDF 322.8 KB
Test_Setuo_PhotoTest Setup Photos2025-01-20PDF 441.1 KB
Tsup_HAC RFTest Setup Photos2025-01-20PDF 188.9 KB
Tsup_HAC T-CoilTest Setup Photos2025-01-20PDF 223.5 KB
Tsup_HAC_Volume_ControlTest Setup Photos2025-01-20PDF 149.9 KB
Tsup_SARTest Setup Photos2025-01-20PDF 646.9 KB
Antenna_ReportTest Report2024-07-31PDF 897 KB
HAC_RF_AnnexCTest Report2024-07-31PDF 285.9 KB
HAC_RF_AnnexDTest Report2024-07-31PDF 395 KB
HAC_RF_AnnexE1Test Report2024-07-31PDF 5 MB
HAC_RF_AnnexE2Test Report2024-07-31PDF 4.9 MB
HAC_RF_AnnexE3Test Report2024-07-31PDF 895.2 KB
HAC_RF_AnnexE4Test Report2024-07-31PDF 1.9 MB
HAC_RF_AnnexE5Test Report2024-07-31PDF 1.5 MB
HAC_RF_AnnexE6Test Report2024-07-31PDF 1.6 MB
HAC_T-Coil_AnnexCTest Report2024-07-31PDF 2.5 MB
HAC_T-Coil_AnnexDTest Report2024-07-31PDF 3.2 MB
HAC_Volume_Control_AnnexCTest Report2024-07-31PDF 199.8 KB
HAC_Volume_Control_AnnexD1Test Report2024-07-31PDF 5.4 MB
HAC_Volume_Control_AnnexD2Test Report2024-07-31PDF 2.9 MB
SZ24020075E01_Tinno_VOIX U10_FCC_EMCTest Report2024-07-31PDF 1.6 MB
SZ24020075S02_HAC_Volume_ControlTest Report2024-07-31PDF 694.4 KB
SZ24020075S03_HAC_RF_EmissionTest Report2024-07-31PDF 904.2 KB
SZ24020075S04_HAC_T-CoilTest Report2024-07-31PDF 897.7 KB
SZ24020075W01_GSM_WCDM_PCETest Report2024-07-31PDF 5 MB
SZ24020075W02_LTE_PCE_1Test Report2024-07-31PDF 5.4 MB
SZ24020075W02_LTE_PCE_2Test Report2024-07-31PDF 5.2 MB
SZ24020075W02_LTE_PCE_3Test Report2024-07-31PDF 5.3 MB
SZ24020075W02_LTE_PCE_4Test Report2024-07-31PDF 5.2 MB
SZ24020075W02_LTE_PCE_5Test Report2024-07-31PDF 5.1 MB
SZ24020075W02_LTE_PCE_6Test Report2024-07-31PDF 5.2 MB
SZ24020075W02_LTE_PCE_7Test Report2024-07-31PDF 5.3 MB
SZ24020075W02_LTE_PCE_8Test Report2024-07-31PDF 3.5 MB
SZ24020075W03_LTE_Part90_PCETest Report2024-07-31PDF 4.6 MB
SZ24020075W04_Tinno_VOIX U10_BLE_DTSTest Report2024-07-31PDF 4 MB
SZ24020075W05_BTclassic_DSSTest Report2024-07-31PDF 4.5 MB
SZ24020075W06_Tinno_VOIX U10_WiFi2.4G_DTSTest Report2024-07-31PDF 3.6 MB
Attestation_Statements_Part2.911(d)(5)Attestation Statements2024-07-31PDF 97.6 KB
Attestation_Statements_Part2.911(d)(7)Attestation Statements2024-07-31PDF 247.9 KB
DA-23-914A1_for_WavierAttestation Statements2024-07-31PDF 150.4 KB
HAC_Waiver_LetterAttestation Statements2024-07-31PDF 96.3 KB
Confidentiality_Request_LetterCover Letter(s)2024-07-31PDF 101.4 KB
POACover Letter(s)2024-07-31PDF 98 KB
SAR_AnnexCRF Exposure Info2024-07-31PDF 571.9 KB
SAR_AnnexDRF Exposure Info2024-07-31PDF 1.6 MB
SAR_AnnexERF Exposure Info2024-07-31PDF 268.3 KB
SAR_AnnexF1RF Exposure Info2024-07-31PDF 3.7 MB
SAR_AnnexF2RF Exposure Info2024-07-31PDF 1.9 MB
SAR_AnnexF3RF Exposure Info2024-07-31PDF 2.4 MB
SAR_AnnexF4RF Exposure Info2024-07-31PDF 4.1 MB
SAR_AnnexF5RF Exposure Info2024-07-31PDF 4.4 MB
SAR_AnnexF6RF Exposure Info2024-07-31PDF 4.2 MB
SAR_AnnexF7RF Exposure Info2024-07-31PDF 4.3 MB
SAR_AnnexF8RF Exposure Info2024-07-31PDF 2.4 MB
SZ24020075S01_Tinno_VOIX U10_SARRF Exposure Info2024-07-31PDF 2.6 MB
Block_Diagram Metadata onlyBlock DiagramPDF 5.4 MB
SCH Metadata onlySchematicsPDF 701.6 KB
Operational_Description Metadata onlyOperational DescriptionPDF 579.6 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 1.2 MB
Tune_up Metadata onlyParts List/Tune Up InfoPDF 97.1 KB

Application Information

Application IDkh/haNZEujhs8fgKQfxfaw==
Final Action Date2024-07-31
Application PurposeOriginal Equipment
Applicant FRN0018783100
ModelV461C
Equipment ClassJBP - Part 15 Class B Computing Device Peripheral
Device DescriptionSmart Phone
Responsible Partyxiaoping LI, Manager, xiaoping.li@tinno.com , (86) 755-86095550
Test FirmMr. Su Feng, Shenzhen Morlab Communications Technology Co. Ltd., Zx.sun@morlab.cn , +86 755 36698566
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityYes
Short-Term Confidentiality Date01/20/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes

Applications

Application IDDatePurpose
kh/haNZEujhs8fgKQfxfaw==2024-07-31Original Equipment
dZUVxNeGtZqxy7PoEbhSyw==2024-07-31Original Equipment
6CZbzRThop4h3ydn5PQ/3g==2024-07-31Original Equipment
0OpUSlXmOZTSou7+mKqNyQ==2024-07-31Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15BCC
673-688 MHz0.0550.034ppm17M9G7D27HC, WV
673-688 MHz0.0460.034ppm17M9W7D27HC, WV
704-711 MHz0.0630.03ppm8M96G7D27HC, WV
704-711 MHz0.0530.03ppm8M96W7D27HC, WV
709-711 MHz0.0630.03ppm8M96G7D27HC, WV
709-711 MHz0.0530.03ppm8M97W7D27HC, WV
815.5-822.5 MHz0.0610.023ppm2M69G7D9HC, WV
816.5-821.5 MHz0.0530.023ppm4M48W7D9HC, WV
819 MHz0.0590.023ppm8M95G7D9HC, WV
819 MHz0.050.023ppm8M95W7D9HC, WV
825.5-847.5 MHz0.0630.027ppm2M69G7D22HHC, WV
826.5-846.5 MHz0.0530.027ppm4M49W7D22HHC, WV
829-844 MHz0.0550.024ppm8M97G7D22HHC, WV
829-844 MHz0.0470.024ppm8M96W7D22HHC, WV
831.5-841.5 MHz0.0610.027ppm13M4G7D22HHC, WV
831.5-841.5 MHz0.0510.027ppm13M4W7D22HHC, WV
1712.4-1752.6 MHz0.1880.013ppm4M20F9W27HC, WV
1720-1745 MHz0.170.012ppm17M9G7D27HC, WV
1720-1745 MHz0.1410.012ppm17M9W7D27HC, WV
1720-1770 MHz0.1610.013ppm17M9G7D27HC, WV
1720-1770 MHz0.1340.013ppm17M9W7D27HC, WV
1850.2-1909.8 MHz0.7780.012ppm246KGXW24EHC, WV
1850.2-1909.8 MHz0.3620.011ppm247KG7W24EHC, WV
1852.4-1907.6 MHz0.1690.011ppm4M19F9W24EHC, WV
1860-1900 MHz0.1520.024ppm17M9G7D24EHC, WV
1860-1900 MHz0.1270.024ppm17M9W7D24EHC, WV
1860-1905 MHz0.1570.012ppm17M9G7D24EHC, WV
1860-1905 MHz0.1230.012ppm17M9W7D24EHC, WV
2402-2480 MHz0.005110015CCC
2402-2480 MHz0.0049715CCC
2412-2462 MHz0.1006915CCC, HC, WV
2506-2680 MHz0.3360.009ppm17M9G7D27HC, WV
2506-2680 MHz0.2580.009ppm17M9W7D27HC, WV

Grants

TCB Grant - Application kh/haNZEujhs8fgKQfxfaw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany 		Date of Grant: 07/31/2024

Application Dated: 07/23/2024
Shenzhen Tinno Mobile Technology Corp
27-001, South side of Tianlong mobile HQ Building,
Tongfa South Road, Xili Street, Nanshan District
Shenzhen,Guangdong Province, 518000
China
 
Attention: xiaoping LI , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XD6V461C
Name of Grantee:  Shenzhen Tinno Mobile Technology Corp
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application kh/haNZEujhs8fgKQfxfaw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen Tinno Mobile Technology Corp
27-001, South side of Tianlong mobile HQ Building, Tongfa South Road, Xili Street, Nanshan District
Shenzhen,Guangdong Province, 518000
China 		  Date of Grant: 07/31/2024

Application Dated: 07/23/2024
 
Attention: xiaoping LI , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XD6V461C
Name of Grantee:  Shenzhen Tinno Mobile Technology Corp
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application dZUVxNeGtZqxy7PoEbhSyw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany 		Date of Grant: 07/31/2024

Application Dated: 07/23/2024
Shenzhen Tinno Mobile Technology Corp
27-001, South side of Tianlong mobile HQ Building,
Tongfa South Road, Xili Street, Nanshan District
Shenzhen,Guangdong Province, 518000
China
 
Attention: xiaoping LI , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XD6V461C
Name of Grantee:  Shenzhen Tinno Mobile Technology Corp
Equipment Class: Digital Transmission System
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00497  
CC HC WV 15C 2412.0  -  2462.0 0.10069  

Output power is maximum peak conducted.
This device supports IEEE 802.11 b/g/n20 MHz channel bandwidths.
This device has integrated DSS, DTS and PCE transmitters certified under the same FCC ID.
SAR compliance for body-worn operating configurations is limited to the belt- clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.54 W/kg, 0.25 W/kg, 0.25 W/kg, and 1.29 W/kg, respectively.
HAC-2019, under the waiver DA 23-914. The lowest conversational gain is 13.43 dB with a hearing aid and 19.11 dB without a hearing aid.

CC: This device is certified pursuant to two different Part 15 rules sections.
HC: This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules.
WV: Grant issued under waiver

EAS Grant - Application dZUVxNeGtZqxy7PoEbhSyw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen Tinno Mobile Technology Corp
27-001, South side of Tianlong mobile HQ Building, Tongfa South Road, Xili Street, Nanshan District
Shenzhen,Guangdong Province, 518000
China 		  Date of Grant: 07/31/2024

Application Dated: 07/23/2024
 
Attention: xiaoping LI , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XD6V461C
Name of Grantee:  Shenzhen Tinno Mobile Technology Corp
Equipment Class: Digital Transmission System
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00497  
CC HC WV 15C 2412.0  -  2462.0 0.10069  

Output power is maximum peak conducted.
This device supports IEEE 802.11 b/g/n20 MHz channel bandwidths.
This device has integrated DSS, DTS and PCE transmitters certified under the same FCC ID.
SAR compliance for body-worn operating configurations is limited to the belt- clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.54 W/kg, 0.25 W/kg, 0.25 W/kg, and 1.29 W/kg, respectively.
HAC-2019, under the waiver DA 23-914. The lowest conversational gain is 13.43 dB with a hearing aid and 19.11 dB without a hearing aid.


CC: This device is certified pursuant to two different Part 15 rules sections.
HC: This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules.
WV: Grant issued under waiver

TCB Grant - Application 6CZbzRThop4h3ydn5PQ/3g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany 		Date of Grant: 07/31/2024

Application Dated: 07/23/2024
Shenzhen Tinno Mobile Technology Corp
27-001, South side of Tianlong mobile HQ Building,
Tongfa South Road, Xili Street, Nanshan District
Shenzhen,Guangdong Province, 518000
China
 
Attention: xiaoping LI , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XD6V461C
Name of Grantee:  Shenzhen Tinno Mobile Technology Corp
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
HC WV 22H 824.2  -  848.8 0.528 0.024  PM 249KGXW
HC WV 22H 824.2  -  848.8 0.158 0.025  PM 245KG7W
HC WV 22H 826.4  -  846.6 0.061 0.024  PM 4M19F9W
HC WV 22H 829.0  -  844.0 0.055 0.024  PM 8M97G7D
HC WV 22H 829.0  -  844.0 0.047 0.024  PM 8M96W7D
HC WV 22H 831.5  -  841.5 0.061 0.027  PM 13M4G7D
HC WV 22H 831.5  -  841.5 0.051 0.027  PM 13M4W7D
HC WV 22H 825.5  -  847.5 0.063 0.027  PM 2M69G7D
HC WV 22H 826.5  -  846.5 0.053 0.027  PM 4M49W7D
HC WV 24E 1850.2  -  1909.8 0.778 0.012  PM 246KGXW
HC WV 24E 1850.2  -  1909.8 0.362 0.011  PM 247KG7W
HC WV 24E 1852.4  -  1907.6 0.169 0.011  PM 4M19F9W
HC WV 24E 1860.0  -  1900.0 0.152 0.024  PM 17M9G7D
HC WV 24E 1860.0  -  1900.0 0.127 0.024  PM 17M9W7D
HC WV 24E 1860.0  -  1905.0 0.157 0.012  PM 17M9G7D
HC WV 24E 1860.0  -  1905.0 0.123 0.012  PM 17M9W7D
HC WV 27 1712.4  -  1752.6 0.188 0.013  PM 4M20F9W
HC WV 27 1720.0  -  1745.0 0.17 0.012  PM 17M9G7D
HC WV 27 1720.0  -  1745.0 0.141 0.012  PM 17M9W7D
HC WV 27 704.0  -  711.0 0.063 0.03  PM 8M96G7D
HC WV 27 704.0  -  711.0 0.053 0.03  PM 8M96W7D
HC WV 27 709.0  -  711.0 0.063 0.03  PM 8M96G7D
HC WV 27 709.0  -  711.0 0.053 0.03  PM 8M97W7D
HC WV 27 2506.0  -  2680.0 0.336 0.009  PM 17M9G7D
HC WV 27 2506.0  -  2680.0 0.258 0.009  PM 17M9W7D
HC WV 27 1720.0  -  1770.0 0.161 0.013  PM 17M9G7D
HC WV 27 1720.0  -  1770.0 0.134 0.013  PM 17M9W7D
HC WV 27 673.0  -  688.0 0.055 0.034  PM 17M9G7D
HC WV 27 673.0  -  688.0 0.046 0.034  PM 17M9W7D
HC WV 90 819.0  -  819.0 0.059 0.023  PM 8M95G7D
HC WV 90 819.0  -  819.0 0.05 0.023  PM 8M95W7D
HC WV 90 815.5  -  822.5 0.061 0.023  PM 2M69G7D
HC WV 90 816.5  -  821.5 0.053 0.023  PM 4M48W7D

Output power listed for GSM850, WCDMA Band 5, LTE Band 5/12/17/26/71 are maximum ERP, except Part 90 operations, which are conducted.
Output power listed for PCS1900, WCDMA Band 2/4, LTE Band 2/4/25/41/66 are maximum EIRP.
It supports GSM, WCDMA, LTE (QPSK, 16QAM, 64QAM),
LTE B2, B4, B5, B12, B17, B25, B26, B41, B66, B71,
Channel Bandwidth (1.4/3/5/10 MHz) for LTE B5, B12,
Channel Bandwidth (1.4/3/5/10/15 MHz) for LTE B26,
Channel Bandwidth (1.4/3/5/10/15/20 MHz) for LTE B2, B4, B25, B66,
Channel Bandwidth (5/10 MHz) for LTE B17,
Channel Bandwidth (5/10/15/20 MHz) for LTE B41, B71,
This device contains functions that are not operational in U.S. Territories; this filing is only applicable for U.S. operations.
This device has integrated DSS, DTS and PCE transmitters certified under the same FCC ID.
SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.44 W/kg, 1.04 W/kg, 1.04 W/kg, and 1.29 W/kg, respectively.
HAC-2019, under the waiver DA 23-914. The lowest conversational gain is 13.43 dB with a hearing aid and 19.11 dB without a hearing aid.

HC: This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules.
WV: Grant issued under waiver

EAS Grant - Application 6CZbzRThop4h3ydn5PQ/3g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen Tinno Mobile Technology Corp
27-001, South side of Tianlong mobile HQ Building, Tongfa South Road, Xili Street, Nanshan District
Shenzhen,Guangdong Province, 518000
China 		  Date of Grant: 07/31/2024

Application Dated: 07/23/2024
 
Attention: xiaoping LI , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XD6V461C
Name of Grantee:  Shenzhen Tinno Mobile Technology Corp
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
HC WV 22H 824.2  -  848.8 0.528 0.024  PM 249KGXW
HC WV 22H 824.2  -  848.8 0.158 0.025  PM 245KG7W
HC WV 22H 826.4  -  846.6 0.061 0.024  PM 4M19F9W
HC WV 22H 829.0  -  844.0 0.055 0.024  PM 8M97G7D
HC WV 22H 829.0  -  844.0 0.047 0.024  PM 8M96W7D
HC WV 22H 831.5  -  841.5 0.061 0.027  PM 13M4G7D
HC WV 22H 831.5  -  841.5 0.051 0.027  PM 13M4W7D
HC WV 22H 825.5  -  847.5 0.063 0.027  PM 2M69G7D
HC WV 22H 826.5  -  846.5 0.053 0.027  PM 4M49W7D
HC WV 24E 1850.2  -  1909.8 0.778 0.012  PM 246KGXW
HC WV 24E 1850.2  -  1909.8 0.362 0.011  PM 247KG7W
HC WV 24E 1852.4  -  1907.6 0.169 0.011  PM 4M19F9W
HC WV 24E 1860.0  -  1900.0 0.152 0.024  PM 17M9G7D
HC WV 24E 1860.0  -  1900.0 0.127 0.024  PM 17M9W7D
HC WV 24E 1860.0  -  1905.0 0.157 0.012  PM 17M9G7D
HC WV 24E 1860.0  -  1905.0 0.123 0.012  PM 17M9W7D
HC WV 27 1712.4  -  1752.6 0.188 0.013  PM 4M20F9W
HC WV 27 1720.0  -  1745.0 0.17 0.012  PM 17M9G7D
HC WV 27 1720.0  -  1745.0 0.141 0.012  PM 17M9W7D
HC WV 27 704.0  -  711.0 0.063 0.03  PM 8M96G7D
HC WV 27 704.0  -  711.0 0.053 0.03  PM 8M96W7D
HC WV 27 709.0  -  711.0 0.063 0.03  PM 8M96G7D
HC WV 27 709.0  -  711.0 0.053 0.03  PM 8M97W7D
HC WV 27 2506.0  -  2680.0 0.336 0.009  PM 17M9G7D
HC WV 27 2506.0  -  2680.0 0.258 0.009  PM 17M9W7D
HC WV 27 1720.0  -  1770.0 0.161 0.013  PM 17M9G7D
HC WV 27 1720.0  -  1770.0 0.134 0.013  PM 17M9W7D
HC WV 27 673.0  -  688.0 0.055 0.034  PM 17M9G7D
HC WV 27 673.0  -  688.0 0.046 0.034  PM 17M9W7D
HC WV 90 819.0  -  819.0 0.059 0.023  PM 8M95G7D
HC WV 90 819.0  -  819.0 0.05 0.023  PM 8M95W7D
HC WV 90 815.5  -  822.5 0.061 0.023  PM 2M69G7D
HC WV 90 816.5  -  821.5 0.053 0.023  PM 4M48W7D

Output power listed for GSM850, WCDMA Band 5, LTE Band 5/12/17/26/71 are maximum ERP, except Part 90 operations, which are conducted.
Output power listed for PCS1900, WCDMA Band 2/4, LTE Band 2/4/25/41/66 are maximum EIRP.
It supports GSM, WCDMA, LTE (QPSK, 16QAM, 64QAM),
LTE B2, B4, B5, B12, B17, B25, B26, B41, B66, B71,
Channel Bandwidth (1.4/3/5/10 MHz) for LTE B5, B12,
Channel Bandwidth (1.4/3/5/10/15 MHz) for LTE B26,
Channel Bandwidth (1.4/3/5/10/15/20 MHz) for LTE B2, B4, B25, B66,
Channel Bandwidth (5/10 MHz) for LTE B17,
Channel Bandwidth (5/10/15/20 MHz) for LTE B41, B71,
This device contains functions that are not operational in U.S. Territories; this filing is only applicable for U.S. operations.
This device has integrated DSS, DTS and PCE transmitters certified under the same FCC ID.
SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Head, body-worn accessory, hotspot and simultaneous transmission use conditions are 0.44 W/kg, 1.04 W/kg, 1.04 W/kg, and 1.29 W/kg, respectively.
HAC-2019, under the waiver DA 23-914. The lowest conversational gain is 13.43 dB with a hearing aid and 19.11 dB without a hearing aid.


HC: This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules.
WV: Grant issued under waiver

TCB Grant - Application 0OpUSlXmOZTSou7+mKqNyQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany 		Date of Grant: 07/31/2024

Application Dated: 07/23/2024
Shenzhen Tinno Mobile Technology Corp
27-001, South side of Tianlong mobile HQ Building,
Tongfa South Road, Xili Street, Nanshan District
Shenzhen,Guangdong Province, 518000
China
 
Attention: xiaoping LI , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XD6V461C
Name of Grantee:  Shenzhen Tinno Mobile Technology Corp
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00511  

Output power is maximum peak conducted.
This device has integrated DSS, DTS and PCE transmitters certified under the same FCC ID.
SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for body-worn accessory, hotspot and simultaneous transmission use conditions are <0.10 W/kg, <0.10 W/kg and 1.29 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 0OpUSlXmOZTSou7+mKqNyQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen Tinno Mobile Technology Corp
27-001, South side of Tianlong mobile HQ Building, Tongfa South Road, Xili Street, Nanshan District
Shenzhen,Guangdong Province, 518000
China 		  Date of Grant: 07/31/2024

Application Dated: 07/23/2024
 
Attention: xiaoping LI , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XD6V461C
Name of Grantee:  Shenzhen Tinno Mobile Technology Corp
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00511  

Output power is maximum peak conducted.
This device has integrated DSS, DTS and PCE transmitters certified under the same FCC ID.
SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for body-worn accessory, hotspot and simultaneous transmission use conditions are <0.10 W/kg, <0.10 W/kg and 1.29 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: