FCC ID XDYTR800

850MHz 1900MHz, GSM, GPRS

by System Planning Corporation

Grantee Code: XDY   Product Code: TR800
Latest application date: 2010-06-22

FCC ID Device Details

FCC IDXDYTR800
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXDY
Product CodeTR800
Applicant BusinessSystem Planning Corporation 🇺🇸
Related Domains sysplan.com
Equipment Class850MHz 1900MHz, GSM, GPRS
Test FirmMET Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzChange in identification of presently authorized equipment. Original FCC ID: QPB-TR8000506 Grant Date: 07/13/20062010-06-22

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2010-06-22PDF 159.9 KB
Label and LocationID Label/Location Info2010-06-22PDF 83 KB
Change in ID Request LetterCover Letter(s)2010-06-22PDF 8.5 KB

Application Information

Application IDz42OLrghPTmkAjtagBo9Zg==
Final Action Date2010-06-22
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: QPB-TR8000506 Grant Date: 07/13/2006
Applicant FRN0017928870
ModelTR800
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device Description850MHz 1900MHz, GSM, GPRS
Responsible PartyRonald Martin, Engineer, rmartin@sysplan.com , 703-351-8203
Technical ContactDrew Boudreau, System Planning Corporation, aboudreau@sysplan.com , 703-351-8477
Non-Technical ContactLewis Bromberg, System Planning Corporation, 703-351-8477
Test FirmJon Fuhrman, MET Laboratories, Inc., jfuhrman@metlabs.com , 4109491880
TCB Emailtcbinfo@metlabs.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval: Power is conducted. This device is an OEM module to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antennas used for this OEM module must not exceed 3 dBi gain when operating Part 22(H) and 8 dBi when operating Part 24(E) for either mobile or fixed operating configurations. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Use in portable exposure conditions (2.1093) requires separate equipment authorization. This device contains 1800 MHZ GSM functions that are not operational in U.S. Territories.

Applications

Application IDDatePurpose
z42OLrghPTmkAjtagBo9Zg==2010-06-22Change in identification of presently authorized equipment. Original FCC ID: QPB-TR8000506 Grant Date: 07/13/2006

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.2-848.8 MHz1.21.5ppm300KGXW22H
1850.2-1909.8 MHz0.661.5ppm300KGXW24E

Grants

TCB Grant - Application z42OLrghPTmkAjtagBo9Zg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MET Laboratories, Inc.
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 06/22/2010

Application Dated: 06/22/2010
System Planning Corporation
3601 Wilson Blvd
One Virginia Square
Arlington, VA 22201
 
Attention: Ronald Martin , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XDYTR800
Name of Grantee:  System Planning Corporation
Equipment Class: PCS Licensed Transmitter
Notes: 850MHz 1900MHz, GSM, GPRS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.2 1.5  PM 300KGXW
24E 1850.2  -  1909.8 0.66 1.5  PM 300KGXW

Modular Approval: Power is conducted. This device is an OEM module to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antennas used for this OEM module must not exceed 3 dBi gain when operating Part 22(H) and 8 dBi when operating Part 24(E) for either mobile or fixed operating configurations. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Use in portable exposure conditions (2.1093) requires separate equipment authorization. This device contains 1800 MHZ GSM functions that are not operational in U.S. Territories.

EAS Grant - Application z42OLrghPTmkAjtagBo9Zg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

System Planning Corporation
3601 Wilson Blvd One Virginia Square
Arlington, VA 22201
United States
  Date of Grant: 06/22/2010

Application Dated: 06/22/2010
 
Attention: Ronald Martin , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XDYTR800
Name of Grantee:  System Planning Corporation
Equipment Class: PCS Licensed Transmitter
Notes: 850MHz 1900MHz, GSM, GPRS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.2 1.5  PM 300KGXW
24E 1850.2  -  1909.8 0.66 1.5  PM 300KGXW

Modular Approval: Power is conducted. This device is an OEM module to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Antennas used for this OEM module must not exceed 3 dBi gain when operating Part 22(H) and 8 dBi when operating Part 24(E) for either mobile or fixed operating configurations. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Use in portable exposure conditions (2.1093) requires separate equipment authorization. This device contains 1800 MHZ GSM functions that are not operational in U.S. Territories.



Mail To: