FCC ID XF6-RS9113DBH

802.11 abgn Wi-Fi module with high output power

by Silicon Labs

Grantee Code: XF6   Product Code: RS9113DBH
Latest application date: 2017-01-17

FCC ID Device Details

FCC IDXF6-RS9113DBH
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXF6
Product CodeRS9113DBH
Applicant BusinessSilicon Labs 🇮🇳
Related Domains silabs.com
Equipment Class802.11 abgn Wi-Fi module with high output power
Test FirmTUV Rheinland (India) Pvt. Ltd.,

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2017-01-17
5180-5240 MHzOriginal Equipment2017-01-17

Exhibits

DocumentTypeAvailableFile
OEM Installation ManualUsers Manual2017-01-17PDF 2.2 MB
Internal PhotosInternal Photos2017-01-17PDF 59 KB
Ext. PhotosExternal Photos2017-01-17PDF 70.6 KB
Label n LocationID Label/Location Info2017-01-17PDF 84.9 KB
Setup PhotoTest Setup Photos2017-01-17PDF 499 KB
Test ReportTest Report2017-01-17PDF 2.3 MB
Test ReportTest Report2017-01-17PDF 1.8 MB
Trace DescriptionAttestation Statements2017-01-17PDF 86.1 KB
Conf. Req. LetterCover Letter(s)2017-01-17PDF 392.5 KB
Mod Appr. RequestCover Letter(s)2017-01-17PDF 1.4 MB
Exposure InfoRF Exposure Info2017-01-17PDF 85.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 30.6 KB
Schematic Metadata onlySchematicsPDF 128.9 KB
Ant Desc Metadata onlyOperational DescriptionPDF 719.4 KB
EUT Specs Metadata onlyOperational DescriptionPDF 71.4 KB
OpDesc Metadata onlyOperational DescriptionPDF 183.2 KB
SW security info Metadata onlySDR Software/Security InfPDF 167.6 KB

Application Information

Application IDvs35WCRhyN6qB9fuhucCYg==
Final Action Date2017-01-17
Application PurposeOriginal Equipment
Applicant FRN0018834648
ModelRS9113DBH
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11 abgn Wi-Fi module with high output power
Responsible PartySekhar Abburi, Senior Director & Site Manager, sekhar.abburi@silabs.com , +91-40-3935-1000
Test FirmB GURUPRASAD, TUV Rheinland (India) Pvt. Ltd.,, guruprasad.br@ind.tuv.com , 91-80-3989-9888
TCB Emailrc@twn.tuv.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The antenna of this transmitter must be installed to provide a separation distance of at least 20cm from all persons.

Applications

Application IDDatePurpose
vs35WCRhyN6qB9fuhucCYg==2017-01-17Original Equipment
8FbRsi4BXJcKd+CUqDyMcw==2017-01-17Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.314000015CCC
5180-5240 MHz0.225415ECC
5180-5240 MHz0.100515ECC
5745-5825 MHz0.176615ECC

Grants

TCB Grant - Application vs35WCRhyN6qB9fuhucCYg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 01/17/2017

Application Dated: 01/09/2017
Silicon Labs
9th Floor, Maximus Towers 2B, Raheja Mindspace IT
APIIC Software Layout
Madhapur, HYDERABAD, 500081
India
 
Attention: Sekhar Abburi , Senior Director & Site Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XF6-RS9113DBH
Name of Grantee:  Silicon Labs
Equipment Class: Digital Transmission System
Notes: 802.11 abgn Wi-Fi module with high output power
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.314  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The antenna of this transmitter must be installed to provide a separation distance of at least 20cm from all persons.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application vs35WCRhyN6qB9fuhucCYg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silicon Labs
9th Floor, Maximus Towers 2B, Raheja Mindspace IT APIIC Software Layout
Madhapur, HYDERABAD, 500081
India
  Date of Grant: 01/17/2017

Application Dated: 01/09/2017
 
Attention: Sekhar Abburi , Senior Director & Site Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XF6-RS9113DBH
Name of Grantee:  Silicon Labs
Equipment Class: Digital Transmission System
Notes: 802.11 abgn Wi-Fi module with high output power
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.314  

Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The antenna of this transmitter must be installed to provide a separation distance of at least 20cm from all persons.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8FbRsi4BXJcKd+CUqDyMcw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 01/17/2017

Application Dated: 01/09/2017
Silicon Labs
9th Floor, Maximus Towers 2B, Raheja Mindspace IT
APIIC Software Layout
Madhapur, HYDERABAD, 500081
India
 
Attention: Sekhar Abburi , Senior Director & Site Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XF6-RS9113DBH
Name of Grantee:  Silicon Labs
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 abgn Wi-Fi module with high output power
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.2254  
CC 15E 5180.0  -  5240.0 0.1005  
CC 15E 5745.0  -  5825.0 0.1766  

Output power listed is conducted. In the Band 5.150 - 5.250 GHz, 0.2254W is allowed for indoor fixed installation and 0.1005W is allowed for Portable and Mobile Installation. Use in any fixed outdoor installation requires a PCII to address the outdoor antenna radiation pattern requirements. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The antenna of this transmitter must be installed to provide a separation distance of at least 20cm from all persons.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8FbRsi4BXJcKd+CUqDyMcw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Silicon Labs
9th Floor, Maximus Towers 2B, Raheja Mindspace IT APIIC Software Layout
Madhapur, HYDERABAD, 500081
India
  Date of Grant: 01/17/2017

Application Dated: 01/09/2017
 
Attention: Sekhar Abburi , Senior Director & Site Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XF6-RS9113DBH
Name of Grantee:  Silicon Labs
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11 abgn Wi-Fi module with high output power
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.2254  
CC 15E 5180.0  -  5240.0 0.1005  
CC 15E 5745.0  -  5825.0 0.1766  

Output power listed is conducted. In the Band 5.150 - 5.250 GHz, 0.2254W is allowed for indoor fixed installation and 0.1005W is allowed for Portable and Mobile Installation. Use in any fixed outdoor installation requires a PCII to address the outdoor antenna radiation pattern requirements. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The antenna of this transmitter must be installed to provide a separation distance of at least 20cm from all persons.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: