FCC ID XFF-BRD10
Border router/Bridge
by MMB Research Inc.
Grantee Code: XFF Product Code: BRD10
Latest application date: 2019-12-10
FCC ID Device Details
| FCC ID | XFF-BRD10 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XFF |
| Product Code | BRD10 |
| Applicant Business | MMB Research Inc. 🇨🇦 |
| Related Domains |  mmbresearch.com |
| Equipment Class | Border router/Bridge |
| Test Firm | UltraTech Engineering Labs Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-12-10 |
| 2402-2480 MHz | Original Equipment | 2019-08-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2019-08-09 | PDF 281.2 KB |
| Internal Photos | Internal Photos | 2019-12-10 | PDF 185.2 KB |
| Internal Photos | Internal Photos | 2019-08-09 | PDF 171.5 KB |
| External Photos | External Photos | 2019-12-10 | PDF 170.1 KB |
| External Photos | External Photos | 2019-08-09 | PDF 149.7 KB |
| ID Label and Location Info | ID Label/Location Info | 2019-08-09 | PDF 1.1 MB |
| Test Setup Photos | Test Setup Photos | 2019-12-10 | PDF 410.9 KB |
| Test Setup Photos | Test Setup Photos | 2019-08-09 | PDF 462.5 KB |
| Zigbee Test Report | Test Report | 2019-12-10 | PDF 413.3 KB |
| Test Report BLE | Test Report | 2019-08-09 | PDF 662 KB |
| Test Report WiFi | Test Report | 2019-08-09 | PDF 3.3 MB |
| Test Report Zigbee | Test Report | 2019-08-09 | PDF 615.5 KB |
| Part 15B | Attestation Statements | 2019-12-10 | PDF 47 KB |
| Part 15B | Attestation Statements | 2019-08-09 | PDF 111.3 KB |
| Agent Authorization | Cover Letter(s) | 2019-12-10 | PDF 98.5 KB |
| C2PC Request | Cover Letter(s) | 2019-12-10 | PDF 143.4 KB |
| Confidentiality Request | Cover Letter(s) | 2019-12-10 | PDF 48.2 KB |
| Cover Letter | Cover Letter(s) | 2019-12-10 | PDF 67.6 KB |
| Agent Authorization | Cover Letter(s) | 2019-08-09 | PDF 126.2 KB |
| Confidentiality Request | Cover Letter(s) | 2019-08-09 | PDF 126 KB |
| Cover Letter | Cover Letter(s) | 2019-08-09 | PDF 66.7 KB |
| Modular Request | Cover Letter(s) | 2019-08-09 | PDF 130.6 KB |
| MPE Evaluation BLE | RF Exposure Info | 2019-08-09 | PDF 96.2 KB |
| MPE Evaluation WiFi | RF Exposure Info | 2019-08-09 | PDF 96.9 KB |
| MPE Evaluation Zigbee | RF Exposure Info | 2019-08-09 | PDF 95 KB |
| Block Diagram Metadata only | Block Diagram | PDF 72 KB | |
| Schematics Metadata only | Schematics | PDF 152.6 KB | |
| Schematics Metadata only | Schematics | PDF 157.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 132.4 KB |
Application Information
| Application ID | rZ3HDcvAzCY5uyar2hARQg== |
|---|---|
| Final Action Date | 2019-12-10 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018821439 |
| Model | BRD10 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Border router/Bridge |
| Responsible Party | Mark Borins, CTO, mark.borins@mmbresearch.com , 416-636-3145 |
| Agent | Dan Dan Dan, UltraTech Engineering Labs Inc, dan@ultratech-labs.com  , 905-829-1570 |
| Test Firm | Tri Luu, UltraTech Engineering Labs Inc, tri@ultratech-labs.com , 905-829-1570 |
| TCB Email | vic@ultratech-labs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power output listed is conducted. Power output reduction at upper band-edge channels is required for compliance as documented in this filing. This module is approved for mobile configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users must be provided with instructions and operating conditions for satisfying RF Exposure compliance. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Changes: Removal of empty footprints for the 3v3 regulator and reset buffer. Footprint update of an RF SAW filter on the ZigBee TX chain. Footprint update for 3 power decoupling capacitors. Removal of a single unused test point. Power layout optimizations. TVS diode on expansion header. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rZ3HDcvAzCY5uyar2hARQg== | 2019-12-10 | Class II permissive change or modification of presently authorized equipment |
| sSiuPb5XLgZNUbav/5LbJQ== | 2019-08-09 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application sSiuPb5XLgZNUbav/5LbJQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 08/09/2019 Application Dated: 08/09/2019 |
| MMB Research Inc. |
| 25 Adelaide Street East, Suite 400 |
| Toronto, M5C3A1 Canada |
| Attention: Mark Borins , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XFF-BRD10 |
| Name of Grantee: | MMB Research Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Border router/Bridge |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00185 | |||
| 15C | 2405.0 - 2480.0 | 0.1888 | |||
| 15C | 2412.0 - 2462.0 | 0.25003 | |||
| 15C | 2432.0 - 2432.0 | 0.22646 |
| Modular Approval. Power output listed is conducted. Power output reduction at upper band-edge channels is required for compliance as documented in this filing. This module is approved for mobile configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users must be provided with instructions and operating conditions for satisfying RF Exposure compliance. This device has 20 and 40 bandwidth modes. |
EAS Grant - Application sSiuPb5XLgZNUbav/5LbJQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MMB Research Inc. 25 Adelaide Street East, Suite 400 Toronto, M5C3A1 Canada |
Date of Grant: 08/09/2019 Application Dated: 08/09/2019 |
| Attention: Mark Borins , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XFF-BRD10 |
| Name of Grantee: | MMB Research Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Border router/Bridge |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00185 | |||
| 15C | 2405.0 - 2480.0 | 0.1888 | |||
| 15C | 2412.0 - 2462.0 | 0.25003 | |||
| 15C | 2432.0 - 2432.0 | 0.22646 |
| Modular Approval. Power output listed is conducted. Power output reduction at upper band-edge channels is required for compliance as documented in this filing. This module is approved for mobile configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users must be provided with instructions and operating conditions for satisfying RF Exposure compliance. This device has 20 and 40 bandwidth modes. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 12/10/2019 Application Dated: 12/10/2019 |
| MMB Research Inc. |
| 25 Adelaide Street East, Suite 400 |
| Toronto, M5C3A1 Canada |
| Attention: Mark Borins , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XFF-BRD10 |
| Name of Grantee: | MMB Research Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Border router/Bridge |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00185 | |||
| 15C | 2405.0 - 2480.0 | 0.1888 | |||
| 15C | 2412.0 - 2462.0 | 0.25003 | |||
| 15C | 2432.0 - 2442.0 | 0.22646 |
| Modular Approval. Power output listed is conducted. Power output reduction at upper band-edge channels is required for compliance as documented in this filing. This module is approved for mobile configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users must be provided with instructions and operating conditions for satisfying RF Exposure compliance. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Changes: Removal of empty footprints for the 3v3 regulator and reset buffer. Footprint update of an RF SAW filter on the ZigBee TX chain. Footprint update for 3 power decoupling capacitors. Removal of a single unused test point. Power layout optimizations. TVS diode on expansion header. |
EAS Grant - Application rZ3HDcvAzCY5uyar2hARQg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MMB Research Inc. 25 Adelaide Street East, Suite 400 Toronto, M5C3A1 Canada |
Date of Grant: 12/10/2019 Application Dated: 12/10/2019 |
| Attention: Mark Borins , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XFF-BRD10 |
| Name of Grantee: | MMB Research Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Border router/Bridge |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00185 | |||
| 15C | 2405.0 - 2480.0 | 0.1888 | |||
| 15C | 2412.0 - 2462.0 | 0.25003 | |||
| 15C | 2432.0 - 2442.0 | 0.22646 |
| Modular Approval. Power output listed is conducted. Power output reduction at upper band-edge channels is required for compliance as documented in this filing. This module is approved for mobile configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users must be provided with instructions and operating conditions for satisfying RF Exposure compliance. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Changes: Removal of empty footprints for the 3v3 regulator and reset buffer. Footprint update of an RF SAW filter on the ZigBee TX chain. Footprint update for 3 power decoupling capacitors. Removal of a single unused test point. Power layout optimizations. TVS diode on expansion header. |
| Mail To: |