1. FCC ID
  2. XFM
  3. XFM-QBA757

FCC ID XFM-QBA757

Dual Sim Smart phone

by QBEX ELECTRONICS CORPORATION

Grantee Code: XFM   Product Code: QBA757
Latest application date: 2012-10-19

FCC ID Device Details

FCC IDXFM-QBA757
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXFM
Product CodeQBA757
Applicant BusinessQBEX ELECTRONICS CORPORATION 🇺🇸
Related Domains qbex.com
Equipment ClassDual Sim Smart phone
Test FirmA Test Lab Techno Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzOriginal Equipment2012-10-19
2402-2480 MHzOriginal Equipment2012-10-19
2402-2480 MHzOriginal Equipment2012-10-19

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2012-10-19PDF 803.2 KB
Internal PhotoInternal Photos2012-10-19PDF 974.5 KB
External PhotosExternal Photos2012-10-19PDF 590.8 KB
Label sample & LocationID Label/Location Info2012-10-19PDF 17.9 KB
RF Test Setup PhotoTest Setup Photos2012-10-19PDF 176.2 KB
RF Test Setup PhotoTest Setup Photos2012-10-19PDF 168.7 KB
RF Test Setup PhotoTest Setup Photos2012-10-19PDF 134.2 KB
RF Test Setup Photo - BT 4.0Test Setup Photos2012-10-19PDF 395 KB
SAR Test Set-up PhotoTest Setup Photos2012-10-19PDF 289.2 KB
RF Test ReportTest Report2012-10-19PDF 930.6 KB
RF Test ReportTest Report2012-10-19PDF 850.5 KB
RF Test ReportTest Report2012-10-19PDF 1.2 MB
RF Test Report - BT 4.0Test Report2012-10-19PDF 553.3 KB
SAR Test ReportRF Exposure Info2012-10-19PDF 3.5 MB
SAR test ReportRF Exposure Info2012-10-19PDF 3.5 MB
DoC LetterAttestation Statements2012-10-19PDF 298.6 KB
Authorization LetterCover Letter(s)2012-10-19PDF 252.1 KB
LTC LetterCover Letter(s)2012-10-19PDF 289.7 KB
POACover Letter(s)2012-10-19PDF 764.7 KB

Application Information

Application IDLvO8g55RYjc0gDi7RQX/bA==
Final Action Date2012-10-19
Application PurposeOriginal Equipment
Applicant FRN0021934245
Model-QBA757
Frequency Range824.2-848.8 MHz
Equipment ClassPCE - PCS Licensed Transmitter held to ear
Device DescriptionDual Sim Smart phone
Responsible PartyFrancisco Alfonso, V.P ENGEERING, falfonso@qbex.com , 011-571-4045000
Test FirmEric Chan, A Test Lab Techno Corp., Eric.Chan@atl-lab.com.tw , 886-3-2710188
TCB Emailtcb@siemic.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is ERP for Part 22 and EIRP for Part 24. This device also contains functions that are not operational in U.S. territories This device was tested with a 1.0 cm device-to-body spacing gap and was not tested with any body-worn accessories made by any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for Head , body worn accessory, Product specific (Hotspot) and simultaneous transmission conditions are : 0.17W/kg, 0.88W/kg, 0.88W/kg , 0.90W/kg respectively

Applications

Application IDDatePurpose
LvO8g55RYjc0gDi7RQX/bA==2012-10-19Original Equipment
CkoUmCxPivhZVuCizWKETw==2012-10-19Original Equipment
BjrseFJovYfZQx1J8TZHtQ==2012-10-19Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
824.2-848.8 MHz0.4380.018ppm247KGXW22H
826.4-846.6 MHz0.2520.008ppm4M17F9W22H
1850.2-1909.8 MHz0.1670.02ppm249KGXW24E
2402-2480 MHz0.003510015CCC
2402-2480 MHz0.0013815CCC
2412-2462 MHz0.17915CCC

Grants

TCB Grant - Application LvO8g55RYjc0gDi7RQX/bA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 10/19/2012

Application Dated: 10/19/2012
QBEX ELECTRONICS CORPORATION
1606NW 84th Ave
MIAMI, FL 33126
 
Attention: Francisco Alfonso , V.P ENGEERING

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XFM-QBA757
Name of Grantee:  QBEX ELECTRONICS CORPORATION
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Dual Sim Smart phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 0.438 0.018  PM 247KGXW
24E 1850.2  -  1909.8 0.167 0.02  PM 249KGXW
22H 826.4  -  846.6 0.252 0.008  PM 4M17F9W

Output power listed is ERP for Part 22 and EIRP for Part 24.

This device also contains functions that are not operational in U.S. territories

This device was tested with a 1.0 cm device-to-body spacing gap and was not tested with any body-worn accessories made by any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The highest reported SAR values for Head , body worn accessory, Product specific (Hotspot) and simultaneous transmission conditions are : 0.17W/kg, 0.88W/kg, 0.88W/kg , 0.90W/kg respectively


EAS Grant - Application LvO8g55RYjc0gDi7RQX/bA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

QBEX ELECTRONICS CORPORATION
1606NW 84th Ave P.O. Box ,
MIAMI, FL 33126
United States 		  Date of Grant: 10/19/2012

Application Dated: 10/19/2012
 
Attention: Francisco Alfonso , V.P ENGEERING

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XFM-QBA757
Name of Grantee:  QBEX ELECTRONICS CORPORATION
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Dual Sim Smart phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 0.438 0.018  PM 247KGXW
24E 1850.2  -  1909.8 0.167 0.02  PM 249KGXW
22H 826.4  -  846.6 0.252 0.008  PM 4M17F9W

Output power listed is ERP for Part 22 and EIRP for Part 24.

This device also contains functions that are not operational in U.S. territories

This device was tested with a 1.0 cm device-to-body spacing gap and was not tested with any body-worn accessories made by any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The highest reported SAR values for Head , body worn accessory, Product specific (Hotspot) and simultaneous transmission conditions are : 0.17W/kg, 0.88W/kg, 0.88W/kg , 0.90W/kg respectively



TCB Grant - Application CkoUmCxPivhZVuCizWKETw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 10/19/2012

Application Dated: 10/19/2012
QBEX ELECTRONICS CORPORATION
1606NW 84th Ave
MIAMI, FL 33126
 
Attention: Francisco Alfonso , V.P ENGEERING

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XFM-QBA757
Name of Grantee:  QBEX ELECTRONICS CORPORATION
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Dual Sim Smart phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00351  

Listed power is conducted RF power

This device was tested with a 1.0 cm device-to-body spacing gap and was not tested with any body-worn accessories made by any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The highest reported SAR values for body worn accessory, and simultaneous transmission conditions are : <0.1W/kg, 0.88W/kg respectively


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application CkoUmCxPivhZVuCizWKETw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

QBEX ELECTRONICS CORPORATION
1606NW 84th Ave P.O. Box ,
MIAMI, FL 33126
United States 		  Date of Grant: 10/19/2012

Application Dated: 10/19/2012
 
Attention: Francisco Alfonso , V.P ENGEERING

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XFM-QBA757
Name of Grantee:  QBEX ELECTRONICS CORPORATION
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Dual Sim Smart phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00351  

Listed power is conducted RF power

This device was tested with a 1.0 cm device-to-body spacing gap and was not tested with any body-worn accessories made by any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The highest reported SAR values for body worn accessory, and simultaneous transmission conditions are :

TCB Grant - Application BjrseFJovYfZQx1J8TZHtQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 10/19/2012

Application Dated: 10/19/2012
QBEX ELECTRONICS CORPORATION
1606NW 84th Ave
MIAMI, FL 33126
 
Attention: Francisco Alfonso , V.P ENGEERING

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XFM-QBA757
Name of Grantee:  QBEX ELECTRONICS CORPORATION
Equipment Class: Digital Transmission System
Notes: Dual Sim Smart phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.179  
CC 15C 2402.0  -  2480.0 0.00138  

Listed power is conducted RF power.

Device support both 20/40 MHz signal bandwidth

This device was tested with a 1.0 cm device-to-body spacing gap and was not tested with any body-worn accessories made by any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The highest reported SAR values for Head , body worn accessory, Product specific (Hotspot) and simultaneous transmission conditions are : <0.1W/kg, <0.10W/kg, <0.1W/kg , 0.90W/kg respectively


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application BjrseFJovYfZQx1J8TZHtQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

QBEX ELECTRONICS CORPORATION
1606NW 84th Ave P.O. Box ,
MIAMI, FL 33126
United States 		  Date of Grant: 10/19/2012

Application Dated: 10/19/2012
 
Attention: Francisco Alfonso , V.P ENGEERING

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XFM-QBA757
Name of Grantee:  QBEX ELECTRONICS CORPORATION
Equipment Class: Digital Transmission System
Notes: Dual Sim Smart phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.179  
CC 15C 2402.0  -  2480.0 0.00138  

Listed power is conducted RF power.

Device support both 20/40 MHz signal bandwidth

This device was tested with a 1.0 cm device-to-body spacing gap and was not tested with any body-worn accessories made by any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The highest reported SAR values for Head , body worn accessory, Product specific (Hotspot) and simultaneous transmission conditions are :