FCC ID XGK211486030B
BT/WiFi module
by Coppernic
Grantee Code: XGK Product Code: 211486030B
Latest application date: 2016-08-30
Device Images
FCC ID Device Details
| FCC ID | XGK211486030B |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XGK |
| Product Code | 211486030B |
| Applicant Business | Coppernic 🇫🇷 |
| Related Domains |  coppernic.fr |
| Equipment Class | BT/WiFi module |
| Test Firm | EMITECH Angers |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-08-30 |
| 2412-2472 MHz | Class II permissive change or modification of presently authorized equipment | 2016-08-30 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-08-30 |
| 2412-2472 MHz | Class II permissive change or modification of presently authorized equipment | 2015-10-12 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2015-10-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2015-10-12 |
| 2412-2472 MHz | Change in identification of presently authorized equipment. Original FCC ID: UZ7211486030B Grant Date: 04/16/2012 | 2015-06-02 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: UZ7211486030B Grant Date: 04/16/2012 | 2015-06-02 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: UZ7211486030B Grant Date: 04/16/2012 | 2015-06-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2015-10-12 | PDF 340.5 KB |
| External Photos | External Photos | 2015-10-12 | PDF 129.3 KB |
| External Photos | External Photos | 2015-06-02 | PDF 284 KB |
| Label | ID Label/Location Info | 2015-10-12 | PDF 300.6 KB |
| Label Location | ID Label/Location Info | 2015-10-12 | PDF 270.8 KB |
| Label Sample | ID Label/Location Info | 2015-10-12 | PDF 300.6 KB |
| Label | ID Label/Location Info | 2015-06-02 | PDF 257.5 KB |
| Label Location | ID Label/Location Info | 2015-06-02 | PDF 146.4 KB |
| Co-Location Report | Test Report | 2016-08-30 | PDF 1.1 MB |
| Co-Location Test Report | Test Report | 2016-08-30 | PDF 1.1 MB |
| Test Report | Test Report | 2016-08-30 | PDF 2.1 MB |
| Test Report Supplementary | Test Report | 2016-08-30 | PDF 672.2 KB |
| Authority to Act as Agent | Cover Letter(s) | 2016-08-30 | PDF 225.8 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2016-08-30 | PDF 383.6 KB |
| Cover Letter | Cover Letter(s) | 2016-08-30 | PDF 218.1 KB |
| Published in the Federal Register | Cover Letter(s) | 2016-08-30 | PDF 258.9 KB |
| Radio Certification of BT and WIFI device | Cover Letter(s) | 2016-08-30 | PDF 391.1 KB |
| Cover Letter | Cover Letter(s) | 2015-10-12 | PDF 363.4 KB |
| Modular Approval Cover Letter | Cover Letter(s) | 2015-10-12 | PDF 711.9 KB |
| Modular Approval Letter | Cover Letter(s) | 2015-10-12 | PDF 711.9 KB |
| Authorization Letter | Cover Letter(s) | 2015-06-02 | PDF 64.5 KB |
| Change in ID Letter | Cover Letter(s) | 2015-06-02 | PDF 353.6 KB |
| SAR Report Part 1 | RF Exposure Info | 2016-08-30 | PDF 2.9 MB |
| SAR Report Part 2 | RF Exposure Info | 2016-08-30 | PDF 4.9 MB |
| RF Exposure 1 | RF Exposure Info | 2015-10-12 | PDF 2.5 MB |
| RF Exposure 2 | RF Exposure Info | 2015-10-12 | PDF 4.8 MB |
| RF Exposure 3 | RF Exposure Info | 2015-10-12 | PDF 2.8 MB |
Application Information
| Application ID | i7JJo637x8RTbJMLvbU2fw== |
|---|---|
| Final Action Date | 2016-08-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018841726 |
| Model | 211486030B |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | BT/WiFi module |
| Responsible Party | Marc Piepers, Director of Engineering, marc.piepers@coppernic.fr , 0033442652576 |
| Test Firm | Mounir El Marzouki, EMITECH Angers, m.elmarzouki@emitech-group.com  , 33-2-41-73-26-27 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Single Modular Approval. Power output listed is conducted. This device must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012). Class II Permissive Change: Limited Modular Approval. This Class II Permissive change is to integrate this module into the Motorola Workabout Pro 4, Model: 7528P. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with accessories only as described in this filing. This module is approved for collocation with FCC ID: XGKHFELYWAP3 and FCC ID: XGK7528PA, as documented in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| i7JJo637x8RTbJMLvbU2fw== | 2016-08-30 | Class II permissive change or modification of presently authorized equipment |
| hqpH8K6aRpateaCbGiJXtQ== | 2016-08-30 | Class II permissive change or modification of presently authorized equipment |
| 054TLQ5DaVADgtAFDZTWHg== | 2016-08-30 | Class II permissive change or modification of presently authorized equipment |
| j6jZeOo3wzQVWmay/1YAcQ== | 2015-10-12 | Class II permissive change or modification of presently authorized equipment |
| dFFuJr2HieCu/BeUjxUKdg== | 2015-10-12 | Class II permissive change or modification of presently authorized equipment |
| 0H1qO/XT8+0Zuqihd0Y0Sw== | 2015-10-12 | Class II permissive change or modification of presently authorized equipment |
| t2FhaLZ2ZJ0AoK92jWAQ0Q== | 2015-06-02 | Change in identification of presently authorized equipment. Original FCC ID: UZ7211486030B Grant Date: 04/16/2012 |
| hY1sSiCtVMqqOmGgk7DGTQ== | 2015-06-02 | Change in identification of presently authorized equipment. Original FCC ID: UZ7211486030B Grant Date: 04/16/2012 |
| cWCrfuG1RD4teQdivBpvIQ== | 2015-06-02 | Change in identification of presently authorized equipment. Original FCC ID: UZ7211486030B Grant Date: 04/16/2012 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0150000 | 15C | CC |
| 2412-2472 MHz | 0.2570000 | 15C | CC |
| 2412-2472 MHz | 0.257 | 15C | CC |
| 5180-5240 MHz | 0.032 | 15E | 38, CC, MO |
| 5180-5240 MHz | 0.032 | 15E | CC |
| 5260-5320 MHz | 0.102 | 15E | 38, CC, MO |
| 5260-5320 MHz | 0.102 | 15E | CC |
| 5500-5700 MHz | 0.098 | 15E | 38, CC, MO |
| 5500-5700 MHz | 0.097 | 15E | CC |
| 5745-5825 MHz | 0.159 | 15C | CC |
| 5745-5825 MHz | 0.074 | 15E | 38, CC, MO |
Grants
TCB Grant - Application t2FhaLZ2ZJ0AoK92jWAQ0Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/02/2015 Application Dated: 06/02/2015 |
| Coppernic |
| 185 avenue Archimede |
| Aix en Provence, 13857 France |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth & Wi-Fi device |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2472.0 | 0.257 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.159 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012) Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528X. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.30 W/kg and 0.33 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application t2FhaLZ2ZJ0AoK92jWAQ0Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Coppernic 185 avenue Archimede P.O. Box , Aix en Provence, 13857 France |
Date of Grant: 06/02/2015 Application Dated: 06/02/2015 |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth & Wi-Fi device |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2472.0 | 0.257 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.159 |
| Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012) Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528X. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.30 W/kg and 0.33 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/12/2015 Application Dated: 10/12/2015 |
| Coppernic |
| 185 avenue Archimede |
| Aix en Provence, 13857 France |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth & Wi-Fi device |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2472.0 | 0.257 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.159 |
| Limited Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012) Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528XHFELY-28780008 in co-transmission with RFID module FCC ID: XGKHFELYWAP3. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body and extremity (hand) exposure conditions are 0.15 W/kg and 0.84 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application j6jZeOo3wzQVWmay/1YAcQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Coppernic 185 avenue Archimede P.O. Box , Aix en Provence, 13857 France |
Date of Grant: 10/12/2015 Application Dated: 10/12/2015 |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth & Wi-Fi device |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2472.0 | 0.257 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.159 |
| Limited Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012) Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528XHFELY-28780008 in co-transmission with RFID module FCC ID: XGKHFELYWAP3. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body and extremity (hand) exposure conditions are 0.15 W/kg and 0.84 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/30/2016 Application Dated: 08/30/2016 |
| Coppernic |
| 185 avenue Archimede |
| Aix en Provence, 13857 France |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BT/WiFi module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Limited Single Modular Approval. Power output listed is conducted. This device must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012). Class II Permissive Change: Limited Modular Approval. This Class II Permissive change is to integrate this module into the Motorola Workabout Pro 4, Model: 7528P. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with accessories only as described in this filing. This module is approved for collocation with FCC ID: XGKHFELYWAP3 and FCC ID: XGK7528PA, as documented in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application i7JJo637x8RTbJMLvbU2fw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Coppernic 185 avenue Archimede P.O. Box , Aix en Provence, 13857 France |
Date of Grant: 08/30/2016 Application Dated: 08/30/2016 |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BT/WiFi module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Limited Single Modular Approval. Power output listed is conducted. This device must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012). Class II Permissive Change: Limited Modular Approval. This Class II Permissive change is to integrate this module into the Motorola Workabout Pro 4, Model: 7528P. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with accessories only as described in this filing. This module is approved for collocation with FCC ID: XGKHFELYWAP3 and FCC ID: XGK7528PA, as documented in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/02/2015 Application Dated: 06/02/2015 |
| Coppernic |
| 185 avenue Archimede |
| Aix en Provence, 13857 France |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Bluetooth & Wi-Fi device |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.032 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.102 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.097 |
| Power Output listed is Conducted. Limited Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. . This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012) Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528X. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.39 W/kg and 0.42 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application hY1sSiCtVMqqOmGgk7DGTQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Coppernic 185 avenue Archimede P.O. Box , Aix en Provence, 13857 France |
Date of Grant: 06/02/2015 Application Dated: 06/02/2015 |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Bluetooth & Wi-Fi device |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.032 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.102 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.097 |
| Power Output listed is Conducted. Limited Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. . This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012) Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528X. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.39 W/kg and 0.42 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/30/2016 Application Dated: 08/30/2016 |
| Coppernic |
| 185 avenue Archimede |
| Aix en Provence, 13857 France |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Digital Transmission System |
| Notes: | BT/WiFi module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2472.0 | 0.257 |
| Limited Single Modular Approval. Power output listed is conducted. This device must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012). Class II Permissive Change: Limited Modular Approval. This Class II Permissive change is to integrate this module into the Motorola Workabout Pro 4, Model: 7528P. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with accessories only as described in this filing. This module is approved for collocation with FCC ID: XGKHFELYWAP3 and FCC ID: XGK7528PA, as documented in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for stand-alone and extremities exposure conditions are 0.17 W/kg and 1.46 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application hqpH8K6aRpateaCbGiJXtQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Coppernic 185 avenue Archimede P.O. Box , Aix en Provence, 13857 France |
Date of Grant: 08/30/2016 Application Dated: 08/30/2016 |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Digital Transmission System |
| Notes: | BT/WiFi module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2472.0 | 0.257 |
| Limited Single Modular Approval. Power output listed is conducted. This device must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012). Class II Permissive Change: Limited Modular Approval. This Class II Permissive change is to integrate this module into the Motorola Workabout Pro 4, Model: 7528P. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with accessories only as described in this filing. This module is approved for collocation with FCC ID: XGKHFELYWAP3 and FCC ID: XGK7528PA, as documented in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for stand-alone and extremities exposure conditions are 0.17 W/kg and 1.46 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/12/2015 Application Dated: 10/12/2015 |
| Coppernic |
| 185 avenue Archimede |
| Aix en Provence, 13857 France |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Bluetooth & Wi-Fi device |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.032 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.102 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.097 |
| Limited Single Modular Approval. Power output listed is conducted. This device must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. . This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012) Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528XHFELY-28780008 in co-transmission with RFID module FCC ID: XGKHFELYWAP3. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body and extremity (hand) exposure conditions are 0.14 W/kg and 0.22 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application dFFuJr2HieCu/BeUjxUKdg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Coppernic 185 avenue Archimede P.O. Box , Aix en Provence, 13857 France |
Date of Grant: 10/12/2015 Application Dated: 10/12/2015 |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Bluetooth & Wi-Fi device |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.032 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.102 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.097 |
| Limited Single Modular Approval. Power output listed is conducted. This device must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. . This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012) Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528XHFELY-28780008 in co-transmission with RFID module FCC ID: XGKHFELYWAP3. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body and extremity (hand) exposure conditions are 0.14 W/kg and 0.22 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/02/2015 Application Dated: 06/02/2015 |
| Coppernic |
| 185 avenue Archimede |
| Aix en Provence, 13857 France |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth & Wi-Fi device |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Power Output listed is conducted. Limited Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012) Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528X. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application cWCrfuG1RD4teQdivBpvIQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Coppernic 185 avenue Archimede P.O. Box , Aix en Provence, 13857 France |
Date of Grant: 06/02/2015 Application Dated: 06/02/2015 |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth & Wi-Fi device |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Power Output listed is conducted. Limited Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012) Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528X. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/12/2015 Application Dated: 10/12/2015 |
| Coppernic |
| 185 avenue Archimede |
| Aix en Provence, 13857 France |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth & Wi-Fi device |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Limited Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012) Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528XHFELY-28780008 in co-transmission with RFID module FCC ID: XGKHFELYWAP3. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 0H1qO/XT8+0Zuqihd0Y0Sw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Coppernic 185 avenue Archimede P.O. Box , Aix en Provence, 13857 France |
Date of Grant: 10/12/2015 Application Dated: 10/12/2015 |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth & Wi-Fi device |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Limited Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012) Class II Permissive Change: This Class II Permissive Change is to integrate this module into the MOTOROLA WORKABOUT PRO 4, Model: 7528XHFELY-28780008 in co-transmission with RFID module FCC ID: XGKHFELYWAP3. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/30/2016 Application Dated: 08/30/2016 |
| Coppernic |
| 185 avenue Archimede |
| Aix en Provence, 13857 France |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | BT/WiFi module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.032 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.102 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.098 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.074 |
| Limited Single Modular Approval. Power output listed is conducted. This device must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012). Class II Permissive Change: Limited Modular Approval. This Class II Permissive change is to integrate this module into the Motorola Workabout Pro 4, Model: 7528P. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with accessories only as described in this filing. This module is approved for collocation with FCC ID: XGKHFELYWAP3 and FCC ID: XGK7528PA, as documented in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for stand-alone and extremities exposure conditions are 0.14 W/kg and 0.28 W/kg, respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 054TLQ5DaVADgtAFDZTWHg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Coppernic 185 avenue Archimede P.O. Box , Aix en Provence, 13857 France |
Date of Grant: 08/30/2016 Application Dated: 08/30/2016 |
| Attention: Marc Piepers , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XGK211486030B |
| Name of Grantee: | Coppernic |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | BT/WiFi module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.032 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.102 | ||
| 38 CC MO | 15E | 5500.0 - 5700.0 | 0.098 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.074 |
| Limited Single Modular Approval. Power output listed is conducted. This device must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (Date of Grant: 04/16/2012). Class II Permissive Change: Limited Modular Approval. This Class II Permissive change is to integrate this module into the Motorola Workabout Pro 4, Model: 7528P. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with accessories only as described in this filing. This module is approved for collocation with FCC ID: XGKHFELYWAP3 and FCC ID: XGK7528PA, as documented in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for stand-alone and extremities exposure conditions are 0.14 W/kg and 0.28 W/kg, respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |