FCC ID XGKHFAM2G2

RFID MODULE HF-AM2-G2

by Coppernic

Grantee Code: XGK   Product Code: HFAM2G2
Latest application date: 2010-02-12

FCC ID Device Details

FCC IDXGKHFAM2G2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXGK
Product CodeHFAM2G2
Applicant BusinessCoppernic 🇫🇷
Related Domains coppernic.fr
Equipment ClassRFID MODULE HF-AM2-G2
Test FirmEMITECH Ile de France

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
13.56 MHzOriginal Equipment2010-02-12

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2010-02-12PDF 1.7 MB
Internal PhotosInternal Photos2010-02-12PDF 955.6 KB
External PhotosExternal Photos2010-02-12PDF 106.8 KB
Label InfoID Label/Location Info2010-02-12PDF 699.4 KB
Test Setup PhotosTest Setup Photos2010-02-12PDF 385 KB
Test Report 1Test Report2010-02-12PDF 1.9 MB
Test Report 2Test Report2010-02-12PDF 1 MB
Authorization LetterCover Letter(s)2010-02-12PDF 24.5 KB
Confidential LetterCover Letter(s)2010-02-12PDF 92.7 KB
Cover LetterCover Letter(s)2010-02-12PDF 95 KB

Application Information

Application IDMd5BPIi88IJaQ8QDHjFPbQ==
Final Action Date2010-02-12
Application PurposeOriginal Equipment
Applicant FRN0018841726
ModelHFAM2G2
Frequency Range13.56 MHz
Equipment ClassDXX - Part 15 Low Power Communication Device Transmitter
Device DescriptionRFID MODULE HF-AM2-G2
Responsible PartyMarc Piepers, Director of Engineering, marc.piepers@coppernic.fr , 0033442652576
Test FirmDominique Bras, EMITECH Ile de France, d.bras@emitech.fr , 33-1-30-57-55-55
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval. This module is approved for use when installed in the following host models Workabout Pro G2 7527C and 7527S. This PDA is approved as a hand-held and hand-operated only portable (relative to hand) device which is normally operated at 20 cm from a person’s body. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This module is approved for collocation with FCCID GM37527RA2041 and FCCID GM37525BTB, as documented in this filing.

Applications

Application IDDatePurpose
Md5BPIi88IJaQ8QDHjFPbQ==2010-02-12Original Equipment

Equipment Authorization

FrequencyRules
13.56 MHz15C

Grants

TCB Grant - Application Md5BPIi88IJaQ8QDHjFPbQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 02/12/2010

Application Dated: 02/12/2010
Coppernic
185 avenue Archimede
Aix en Provence, 13857
France
 
Attention: Marc Piepers , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XGKHFAM2G2
Name of Grantee:  Coppernic
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: RFID MODULE HF-AM2-G2
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  

Limited Modular Approval. This module is approved for use when installed in the following host models Workabout Pro G2 7527C and 7527S. This PDA is approved as a hand-held and hand-operated only portable (relative to hand) device which is normally operated at 20 cm from a person’s body. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This module is approved for collocation with FCCID GM37527RA2041 and FCCID GM37525BTB, as documented in this filing.

EAS Grant - Application Md5BPIi88IJaQ8QDHjFPbQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Coppernic
185 avenue Archimede P.O. Box ,
Aix en Provence, 13857
France
  Date of Grant: 02/12/2010

Application Dated: 02/12/2010
 
Attention: Marc Piepers , Director of Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XGKHFAM2G2
Name of Grantee:  Coppernic
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: RFID MODULE HF-AM2-G2
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 13.56  -  13.56  

Limited Modular Approval. This module is approved for use when installed in the following host models Workabout Pro G2 7527C and 7527S. This PDA is approved as a hand-held and hand-operated only portable (relative to hand) device which is normally operated at 20 cm from a person’s body. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This module is approved for collocation with FCCID GM37527RA2041 and FCCID GM37525BTB, as documented in this filing.



Mail To: