FCC ID XHG-M600A
3G 4G Module
by Franklin Technology Inc.
Grantee Code: XHG Product Code: M600A
Latest application date: 2011-09-27
FCC ID Device Details
| FCC ID | XHG-M600A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XHG |
| Product Code | M600A |
| Applicant Business | Franklin Technology Inc. 🇰🇷 |
| Related Domains |  franklintech.co.kr  ccsemc.com |
| Equipment Class | 3G 4G Module |
| Test Firm | Compliance Certification Services |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.7-848.31 MHz | Class II permissive change or modification of presently authorized equipment | 2011-09-27 |
| 824.7-848.31 MHz | Original Equipment | 2011-04-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Regulatory Notice | Users Manual | 2011-11-11 | PDF 168.1 KB |
| User Guide | Users Manual | 2011-11-11 | PDF 5.7 MB |
| User Manual | Users Manual | 2011-10-24 | PDF 444.8 KB |
| Photos Int | Internal Photos | 2011-11-11 | PDF 5.6 MB |
| Photos Int | Internal Photos | 2011-10-24 | PDF 227.8 KB |
| Photos Ext | External Photos | 2011-11-11 | PDF 1.2 MB |
| Photos Ext | External Photos | 2011-10-24 | PDF 217.2 KB |
| Label | ID Label/Location Info | 2011-09-27 | PDF 503.3 KB |
| Label Location 1 | ID Label/Location Info | 2011-09-27 | PDF 320.1 KB |
| Label Location 2 | ID Label/Location Info | 2011-09-27 | PDF 591.3 KB |
| Label | ID Label/Location Info | 2011-04-28 | PDF 361.8 KB |
| WWAN SAR Photos | Test Setup Photos | 2011-11-11 | PDF 2.1 MB |
| WiMax SAR Photos | Test Setup Photos | 2011-11-11 | PDF 195.5 KB |
| Photos Test Setup | Test Setup Photos | 2011-10-24 | PDF 436.5 KB |
| Test Report 22 & 24 | Test Report | 2011-04-28 | PDF 906.6 KB |
| Test Report 27 (1) | Test Report | 2011-04-28 | PDF 526.7 KB |
| Test Report 27 (2) | Test Report | 2011-04-28 | PDF 2.5 MB |
| Auth Ltr | Cover Letter(s) | 2011-09-27 | PDF 61.8 KB |
| C2PC Ltr | Cover Letter(s) | 2011-09-27 | PDF 23.5 KB |
| Conf Request | Cover Letter(s) | 2011-09-27 | PDF 38.9 KB |
| Technical Justification | Cover Letter(s) | 2011-09-27 | PDF 19.6 KB |
| Auth Ltr | Cover Letter(s) | 2011-04-28 | PDF 116.3 KB |
| Conf Ltr | Cover Letter(s) | 2011-04-28 | PDF 132.2 KB |
| Modular Ltr | Cover Letter(s) | 2011-04-28 | PDF 56.7 KB |
| WWAN SAR 1900 MHz Dipole Cal | RF Exposure Info | 2011-09-27 | PDF 594 KB |
| WWAN SAR 800 MHz Dipole Cal | RF Exposure Info | 2011-09-27 | PDF 600.1 KB |
| WWAN SAR E-Field Probe Cal | RF Exposure Info | 2011-09-27 | PDF 639.3 KB |
| WWAN SAR Plots | RF Exposure Info | 2011-09-27 | PDF 242.9 KB |
| WWAN SAR Report | RF Exposure Info | 2011-09-27 | PDF 1 MB |
| WWAN SAR System Check Plots | RF Exposure Info | 2011-09-27 | PDF 132.9 KB |
| WiMax Dipole Probe Cal | RF Exposure Info | 2011-09-27 | PDF 596 KB |
| WiMax E-Field Probe Cal | RF Exposure Info | 2011-09-27 | PDF 639.3 KB |
| WiMax SAR Plots | RF Exposure Info | 2011-09-27 | PDF 788.2 KB |
| WiMax SAR Report | RF Exposure Info | 2011-09-27 | PDF 776.4 KB |
| WiMax SAR System Check Plots | RF Exposure Info | 2011-09-27 | PDF 64.8 KB |
| MPE 2.6 Ghz | RF Exposure Info | 2011-04-28 | PDF 72.9 KB |
| MPE 800 & 1900 MHz | RF Exposure Info | 2011-04-28 | PDF 73 KB |
Application Information
| Application ID | g+eofy/JB9Hnu8rgcTZTTQ== |
|---|---|
| Final Action Date | 2011-09-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018861286 |
| Model | -M600A |
| Frequency Range | 824.7-848.31 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | 3G 4G Module |
| Responsible Party | Kevin Kang, Executive Engineer, kevin@franklintech.co.kr , 82-70-8228-3432 |
| Technical Contact | Claire Hoque, Compliance Certification Services, claire.hoque@ccsemc.com , (510) 771-1000 |
| Non-Technical Contact | Claire Hoque, Compliance Certification Services, claire.hoque@ccsemc.com , (510) 771-1000 |
| Test Firm | Thu Chan, Compliance Certification Services, thu.chan@ccsemc.com , 510-771-1122 |
| TCB Email | certnotice@ccsemc.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 11/11/2011 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add specific portable notebook host. Output power listed is conducted. Modular Approval for use as a module in mobile applications only. Antenna gain including cable loss must not exceed 1.7 dBi in 800 MHz band, 3.5 dBi in 1800 MHz band and 2.9 dBi in 2.6 GHz band for purposes of 2.1043 and 2.1091. Operation with higher gain antennas or in portable RF exposure applications requires additional evaluation and certification. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons except as described in this filing. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest SAR value is: < 0.1 W/kg |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| g+eofy/JB9Hnu8rgcTZTTQ== | 2011-09-27 | Class II permissive change or modification of presently authorized equipment |
| kSsBDEXtbuUoyHqUxURJTA== | 2011-04-28 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application kSsBDEXtbuUoyHqUxURJTA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/28/2011 Application Dated: 04/27/2011 |
| Franklin Technology Inc. |
| 906 JEI Platz, 459-11, Gasan-Dong, Gumcheon-Gu |
| Seoul, 152-803 South Korea |
| Attention: Kevin Kang , Executive Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHG-M600A |
| Name of Grantee: | Franklin Technology Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | 3G 4G Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.269 | 0.01 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.75 | 0.254 | 0.01 PM | 1M29F9W | |
| 27 | 2498.5 - 2687.5 | 0.219 | 0.005 PM | 4M45G7D | |
| 27 | 2501.0 - 2685.0 | 0.207 | 0.005 PM | 4M40W7D | |
| 27 | 2498.5 - 2687.5 | 0.188 | 0.005 PM | 9M06G7D | |
| 27 | 2501.0 - 2685.0 | 0.194 | 0.005 PM | 9M14W7D |
| Output power listed is conducted. Modular Approval for use as a module in mobile applications only. Antenna gain including cable loss must not exceed 1.7 dBi in 800 MHz band, 3.5 dBi in 1800 MHz band and 2.9 dBi in 2.6 GHz band for purposes of 2.1043 and 2.1091. Operation with higher gain antennas or in portable RF exposure applications requires additional evaluation and certification. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application kSsBDEXtbuUoyHqUxURJTA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Franklin Technology Inc. 906 JEI Platz, 459-11, Gasan-Dong, Gumcheon-Gu Seoul, 152-803 South Korea |
Date of Grant: 04/28/2011 Application Dated: 04/27/2011 |
| Attention: Kevin Kang , Executive Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHG-M600A |
| Name of Grantee: | Franklin Technology Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | 3G 4G Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.269 | 0.01 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.75 | 0.254 | 0.01 PM | 1M29F9W | |
| 27 | 2498.5 - 2687.5 | 0.219 | 0.005 PM | 4M45G7D | |
| 27 | 2501.0 - 2685.0 | 0.207 | 0.005 PM | 4M40W7D | |
| 27 | 2498.5 - 2687.5 | 0.188 | 0.005 PM | 9M06G7D | |
| 27 | 2501.0 - 2685.0 | 0.194 | 0.005 PM | 9M14W7D |
| Output power listed is conducted. Modular Approval for use as a module in mobile applications only. Antenna gain including cable loss must not exceed 1.7 dBi in 800 MHz band, 3.5 dBi in 1800 MHz band and 2.9 dBi in 2.6 GHz band for purposes of 2.1043 and 2.1091. Operation with higher gain antennas or in portable RF exposure applications requires additional evaluation and certification. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/27/2011 Application Dated: 09/27/2011 |
| Franklin Technology Inc. |
| 906 JEI Platz, 459-11, Gasan-Dong, Gumcheon-Gu |
| Seoul, 152-803 South Korea |
| Attention: Kevin Kang , Executive Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHG-M600A |
| Name of Grantee: | Franklin Technology Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | 3G 4G Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.269 | 0.01 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.75 | 0.254 | 0.01 PM | 1M29F9W | |
| 27 | 2498.5 - 2687.5 | 0.219 | 0.005 PM | 4M45G7D | |
| 27 | 2501.0 - 2685.0 | 0.207 | 0.005 PM | 4M40W7D | |
| 27 | 2498.5 - 2687.5 | 0.188 | 0.005 PM | 9M06G7D | |
| 27 | 2501.0 - 2685.0 | 0.194 | 0.005 PM | 9M14W7D |
| Class II Permissive Change to add specific portable notebook host. Output power listed is conducted. Modular Approval for use as a module in mobile applications only. Antenna gain including cable loss must not exceed 1.7 dBi in 800 MHz band, 3.5 dBi in 1800 MHz band and 2.9 dBi in 2.6 GHz band for purposes of 2.1043 and 2.1091. Operation with higher gain antennas or in portable RF exposure applications requires additional evaluation and certification. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons except as described in this filing. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest SAR value is: < 0.1 W/kg |
EAS Grant - Application g+eofy/JB9Hnu8rgcTZTTQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Franklin Technology Inc. 906 JEI Platz, 459-11, Gasan-Dong, Gumcheon-Gu Seoul, 152-803 South Korea |
Date of Grant: 09/27/2011 Application Dated: 09/27/2011 |
| Attention: Kevin Kang , Executive Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHG-M600A |
| Name of Grantee: | Franklin Technology Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | 3G 4G Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.7 - 848.31 | 0.269 | 0.01 PM | 1M28F9W | |
| 24E | 1851.25 - 1908.75 | 0.254 | 0.01 PM | 1M29F9W | |
| 27 | 2498.5 - 2687.5 | 0.219 | 0.005 PM | 4M45G7D | |
| 27 | 2501.0 - 2685.0 | 0.207 | 0.005 PM | 4M40W7D | |
| 27 | 2498.5 - 2687.5 | 0.188 | 0.005 PM | 9M06G7D | |
| 27 | 2501.0 - 2685.0 | 0.194 | 0.005 PM | 9M14W7D |
| Class II Permissive Change to add specific portable notebook host. Output power listed is conducted. Modular Approval for use as a module in mobile applications only. Antenna gain including cable loss must not exceed 1.7 dBi in 800 MHz band, 3.5 dBi in 1800 MHz band and 2.9 dBi in 2.6 GHz band for purposes of 2.1043 and 2.1091. Operation with higher gain antennas or in portable RF exposure applications requires additional evaluation and certification. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons except as described in this filing. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. OEM integrators must be informed of these specific requirements. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest SAR value is: < 0.1 W/kg |
| Mail To: |