FCC ID XHM-MOBI0600PC
Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card
by FLYTECH TECHNOLOGY CO., LTD
Grantee Code: XHM Product Code: MOBI0600PC
Latest application date: 2021-06-24
FCC ID Device Details
| FCC ID | XHM-MOBI0600PC |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | XHM |
| Product Code | MOBI0600PC |
| Applicant Business | FLYTECH TECHNOLOGY CO., LTD 🇹🇼 |
| Related Domains |  flytech.com.tw  sgs.com |
| Equipment Class | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card |
| Test Firm | SGS Taiwan Ltd. Central RF Lab |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-06-24 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-06-24 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ158ACNBT Grant Date: 04/27/2016 | 2021-05-27 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ158ACNBT Grant Date: 04/27/2016 | 2021-05-27 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ158ACNBT Grant Date: 04/27/2016 | 2021-05-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Safety Guide | Users Manual | 2021-12-19 | PDF 40.3 KB |
| Users Manual | Users Manual | 2021-12-19 | PDF 978.4 KB |
| Internal Photos | Internal Photos | 2021-12-19 | PDF 1.7 MB |
| External Photos | External Photos | 2021-12-19 | PDF 735.8 KB |
| External Photos | External Photos | 2021-11-23 | PDF 154.2 KB |
| ID Label/Location Info | ID Label/Location Info | 2021-06-24 | PDF 200 KB |
| ID Label/Location Info | ID Label/Location Info | 2021-05-27 | PDF 44.8 KB |
| Test Setup Photos_SAR | Test Setup Photos | 2021-12-19 | PDF 829 KB |
| Test Report_SAR | RF Exposure Info | 2021-06-24 | PDF 672 KB |
| Test Report_SAR_Appendix B | RF Exposure Info | 2021-06-24 | PDF 3.4 MB |
| Test Report_SAR_Appendix C | RF Exposure Info | 2021-06-24 | PDF 2.8 MB |
| Declaration of authorization | Cover Letter(s) | 2021-06-24 | PDF 24.2 KB |
| FCC Class II permissive change letter Metadata only | Cover Letter(s) | 2021-06-24 | PDF 30.5 KB |
| FCC Class II permissive change letter revised | Cover Letter(s) | 2021-06-24 | PDF 26.4 KB |
| Request for LT or STC confidentiality | Cover Letter(s) | 2021-06-24 | PDF 28.9 KB |
| Declaration of authorization | Cover Letter(s) | 2021-05-27 | PDF 180.4 KB |
| FLYTECH_FCC Auth Ltr for Change of ID | Cover Letter(s) | 2021-05-27 | PDF 244.3 KB |
| Request for LT or STC confidentiality | Cover Letter(s) | 2021-05-27 | PDF 326.8 KB |
| SparkLAN_FCC Auth Ltr for Change of ID | Cover Letter(s) | 2021-05-27 | PDF 593.1 KB |
| Antenna_Approval--RFA-25-AP866L-4B-210 Metadata only | Operational Description | PDF 3.7 MB | |
| Antenna_Approval--RFA-25-AP866L-4G-350 Metadata only | Operational Description | PDF 4.1 MB | |
| Antenna_SPEC-RFA-25-AP866L-4B-210 Metadata only | Operational Description | PDF 325 KB |
Application Information
| Application ID | b1FtFip6pxBNeccG1OGwRw== |
|---|---|
| Final Action Date | 2021-06-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0018869826 |
| Model | MOBI0600PC |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card |
| Responsible Party | Avin Zhan, avinchan@flytech.com.tw , 886-2-8791-4988 |
| Technical Contact | Jim Chang, SGS Taiwan Ltd, jim.chang@sgs.com , 886 2 2299 3279 |
| Non-Technical Contact | Jim Chang, SGS Taiwan Ltd, jim.chang@sgs.com , 886 2 2299 3279 |
| Test Firm | Ryan WANG, SGS Taiwan Ltd. Central RF Lab, ryan-ec.wang@sgs.com , +886-2-2299-3279 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/19/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC: This change is to add new Host (Tablet, Host Model: M276WHL) and disable frequency bands. This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory is 0.54 W/kg. Modular Approval. Output power is conducted. This device supports 802. 11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80Mtzin the 5 8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transnhitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.66 W/Kg. This device is certified pursuant to two different Part 15 rules sections. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| b1FtFip6pxBNeccG1OGwRw== | 2021-06-24 | Class II permissive change or modification of presently authorized equipment |
| +N/6U+hbVtSf8EMFumEDag== | 2021-06-24 | Class II permissive change or modification of presently authorized equipment |
| w6Drb77+p8xlfqkLWHq5vQ== | 2021-05-27 | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ158ACNBT Grant Date: 04/27/2016 |
| rC+Rs0+kq/468sVy8bsEmQ== | 2021-05-27 | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ158ACNBT Grant Date: 04/27/2016 |
| lmuoQz3rwKIPx8VGbJmQ/Q== | 2021-05-27 | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ158ACNBT Grant Date: 04/27/2016 |
| SErSXAE7z8EEUhDnN7EcbA== | 2021-05-27 | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ158ACNBT Grant Date: 04/27/2016 |
Equipment Authorization
Grants
TCB Grant - Application w6Drb77+p8xlfqkLWHq5vQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/27/2021 Application Dated: 05/26/2021 |
| FLYTECH TECHNOLOGY CO., LTD |
| No. 168, Sing-ai Rd., Neihu District, Taipei City |
| Taipei City, Taiwan |
| Attention: Avin Zhan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHM-MOBI0600PC |
| Name of Grantee: | FLYTECH TECHNOLOGY CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.303 |
| Modular Approval. Output power is conducted. This device supports 802. 11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80Mtzin the 5 8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transnhitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.66 W/Kg. This device is certified pursuant to two different Part 15 rules sections. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application w6Drb77+p8xlfqkLWHq5vQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FLYTECH TECHNOLOGY CO., LTD No. 168, Sing-ai Rd., Neihu District, Taipei City P.O. Box , Taipei City, Taiwan |
Date of Grant: 05/27/2021 Application Dated: 05/26/2021 |
| Attention: Avin Zhan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHM-MOBI0600PC |
| Name of Grantee: | FLYTECH TECHNOLOGY CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.303 |
| Modular Approval. Output power is conducted. This device supports 802. 11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80Mtzin the 5 8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transnhitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.66 W/Kg. This device is certified pursuant to two different Part 15 rules sections. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/27/2021 Application Dated: 05/26/2021 |
| FLYTECH TECHNOLOGY CO., LTD |
| No. 168, Sing-ai Rd., Neihu District, Taipei City |
| Taipei City, Taiwan |
| Attention: Avin Zhan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHM-MOBI0600PC |
| Name of Grantee: | FLYTECH TECHNOLOGY CO., LTD |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application SErSXAE7z8EEUhDnN7EcbA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FLYTECH TECHNOLOGY CO., LTD No. 168, Sing-ai Rd., Neihu District, Taipei City P.O. Box , Taipei City, Taiwan |
Date of Grant: 05/27/2021 Application Dated: 05/26/2021 |
| Attention: Avin Zhan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHM-MOBI0600PC |
| Name of Grantee: | FLYTECH TECHNOLOGY CO., LTD |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/27/2021 Application Dated: 05/26/2021 |
| FLYTECH TECHNOLOGY CO., LTD |
| No. 168, Sing-ai Rd., Neihu District, Taipei City |
| Taipei City, Taiwan |
| Attention: Avin Zhan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHM-MOBI0600PC |
| Name of Grantee: | FLYTECH TECHNOLOGY CO., LTD |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.054 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.056 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.045 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.054 |
| Modular Approval. Output power is conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transnhitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.71 W/Kg. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application rC+Rs0+kq/468sVy8bsEmQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FLYTECH TECHNOLOGY CO., LTD No. 168, Sing-ai Rd., Neihu District, Taipei City P.O. Box , Taipei City, Taiwan |
Date of Grant: 05/27/2021 Application Dated: 05/26/2021 |
| Attention: Avin Zhan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHM-MOBI0600PC |
| Name of Grantee: | FLYTECH TECHNOLOGY CO., LTD |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.054 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.056 | ||
| 38 CC | 15E | 5500.0 - 5720.0 | 0.045 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.054 |
| Modular Approval. Output power is conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transnhitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.71 W/Kg. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/27/2021 Application Dated: 05/26/2021 |
| FLYTECH TECHNOLOGY CO., LTD |
| No. 168, Sing-ai Rd., Neihu District, Taipei City |
| Taipei City, Taiwan |
| Attention: Avin Zhan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHM-MOBI0600PC |
| Name of Grantee: | FLYTECH TECHNOLOGY CO., LTD |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application lmuoQz3rwKIPx8VGbJmQ/Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FLYTECH TECHNOLOGY CO., LTD No. 168, Sing-ai Rd., Neihu District, Taipei City P.O. Box , Taipei City, Taiwan |
Date of Grant: 05/27/2021 Application Dated: 05/26/2021 |
| Attention: Avin Zhan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHM-MOBI0600PC |
| Name of Grantee: | FLYTECH TECHNOLOGY CO., LTD |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 06/24/2021 Application Dated: 06/21/2021 |
| FLYTECH TECHNOLOGY CO., LTD |
| No. 168, Sing-ai Rd., Neihu District, Taipei City |
| Taipei City, Taiwan |
| Attention: Avin Zhan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHM-MOBI0600PC |
| Name of Grantee: | FLYTECH TECHNOLOGY CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.303 |
| C2PC: This change is to add new Host (Tablet, Host Model: M276WHL) and disable frequency bands. This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory is 0.54 W/kg. Modular Approval. Output power is conducted. This device supports 802. 11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80Mtzin the 5 8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transnhitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.66 W/Kg. This device is certified pursuant to two different Part 15 rules sections. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application b1FtFip6pxBNeccG1OGwRw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FLYTECH TECHNOLOGY CO., LTD No. 168, Sing-ai Rd., Neihu District, Taipei City P.O. Box , Taipei City, Taiwan |
Date of Grant: 06/24/2021 Application Dated: 06/21/2021 |
| Attention: Avin Zhan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHM-MOBI0600PC |
| Name of Grantee: | FLYTECH TECHNOLOGY CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.303 |
| C2PC: This change is to add new Host (Tablet, Host Model: M276WHL) and disable frequency bands. This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory is 0.54 W/kg. Modular Approval. Output power is conducted. This device supports 802. 11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80Mtzin the 5 8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transnhitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.66 W/Kg. This device is certified pursuant to two different Part 15 rules sections. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 06/24/2021 Application Dated: 06/21/2021 |
| FLYTECH TECHNOLOGY CO., LTD |
| No. 168, Sing-ai Rd., Neihu District, Taipei City |
| Taipei City, Taiwan |
| Attention: Avin Zhan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHM-MOBI0600PC |
| Name of Grantee: | FLYTECH TECHNOLOGY CO., LTD |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.054 |
| C2PC: This change is to add new Host (Tablet, Host Model: M276WHL) and disable frequency bands. This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.80 W/kg, and 0.827 W/kg, respectively. Modular Approval. Output power is conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transnhitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.71 W/Kg. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +N/6U+hbVtSf8EMFumEDag==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FLYTECH TECHNOLOGY CO., LTD No. 168, Sing-ai Rd., Neihu District, Taipei City P.O. Box , Taipei City, Taiwan |
Date of Grant: 06/24/2021 Application Dated: 06/21/2021 |
| Attention: Avin Zhan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | XHM-MOBI0600PC |
| Name of Grantee: | FLYTECH TECHNOLOGY CO., LTD |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.054 |
| C2PC: This change is to add new Host (Tablet, Host Model: M276WHL) and disable frequency bands. This is a portable device. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.80 W/kg, and 0.827 W/kg, respectively. Modular Approval. Output power is conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transnhitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.71 W/Kg. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |