FCC ID XKB-EXSBASEW

Smart POS Terminal BASE

by INGENICO

Grantee Code: XKB   Product Code: EXSBASEW
Latest application date: 2021-08-24

FCC ID Device Details

FCC IDXKB-EXSBASEW
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXKB
Product CodeEXSBASEW
Applicant BusinessINGENICO 🇫🇷
Related Domains ingenico.com
Equipment ClassSmart POS Terminal BASE
Test FirmBay Area Compliance Laboratories Corp.(Dongguan)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2021-08-24
2412-2462 MHzOriginal Equipment2021-08-24

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-08-24PDF 1.5 MB
Internal PhotosInternal Photos2021-08-24PDF 1,023.2 KB
External PhotosExternal Photos2021-08-24PDF 1.1 MB
ID Label and Label LocationID Label/Location Info2021-08-24PDF 1.4 MB
Test Setup PhotosTest Setup Photos2021-08-24PDF 330.1 KB
Test Setup PhotosTest Setup Photos2021-08-24PDF 331 KB
DFS ReportTest Report2021-08-24PDF 1.5 MB
Test ReportTest Report2021-08-24PDF 1.2 MB
Test Report Part 1Test Report2021-08-24PDF 5.2 MB
Test Report part 2Test Report2021-08-24PDF 4.5 MB
FCC Long Term Confidential Authorization FormCover Letter(s)2021-08-24PDF 76.7 KB
RF ExposureRF Exposure Info2021-08-24PDF 173.5 KB
RF ExposureRF Exposure Info2021-08-24PDF 139.4 KB
Block diagram Metadata onlyBlock DiagramPDF 46.1 KB
Schematics Metadata onlySchematicsPDF 190.3 KB
DFS Expedit Review Declaration Metadata onlyOperational DescriptionPDF 61.3 KB
Operation Description Metadata onlyOperational DescriptionPDF 121.5 KB
U-NII Software Security Description Metadata onlyOperational DescriptionPDF 312.4 KB

Application Information

Application IDmVeqv+gOGfjRvYTNYZwRzQ==
Final Action Date2021-08-24
Application PurposeOriginal Equipment
Applicant FRN0018912279
ModelEXSBASEW
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionSmart POS Terminal BASE
Responsible PartyNicolas Jacquemont, Certification Manager, nicolas.jacquemont@ingenico.com , +330475842123
Test FirmDavid Zhang, Bay Area Compliance Laboratories Corp.(Dongguan), qa.dg@baclcorp.com , 0086 0769 86858888
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.

Applications

Application IDDatePurpose
mVeqv+gOGfjRvYTNYZwRzQ==2021-08-24Original Equipment
V1uYew1q/3CydUml3Q3/ZA==2021-08-24Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.248000015CCC, MO
5180-5240 MHz0.06515ECC, MO
5260-5320 MHz0.06215ECC, MO, ND
5500-5720 MHz0.06215ECC, MO, ND
5745-5825 MHz0.05815ECC, MO

Grants

TCB Grant - Application V1uYew1q/3CydUml3Q3/ZA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 08/24/2021

Application Dated: 08/20/2021
INGENICO
9 Avenue de la gare - Rovaltain TGV
P.O. Box BP25156,
Valence Cedex 9, 26958
France
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-EXSBASEW
Name of Grantee:  INGENICO
Equipment Class: Digital Transmission System
Notes: Smart POS Terminal BASE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.248  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application V1uYew1q/3CydUml3Q3/ZA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

INGENICO
9 Avenue de la gare - Rovaltain TGV P.O. Box BP25156,
Valence Cedex 9, 26958
France
  Date of Grant: 08/24/2021

Application Dated: 08/20/2021
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-EXSBASEW
Name of Grantee:  INGENICO
Equipment Class: Digital Transmission System
Notes: Smart POS Terminal BASE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.248  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application mVeqv+gOGfjRvYTNYZwRzQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 08/24/2021

Application Dated: 08/20/2021
INGENICO
9 Avenue de la gare - Rovaltain TGV
P.O. Box BP25156,
Valence Cedex 9, 26958
France
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-EXSBASEW
Name of Grantee:  INGENICO
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart POS Terminal BASE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.065  
CC MO ND 15E 5260.0  -  5320.0 0.062  
CC MO ND 15E 5500.0  -  5720.0 0.062  
CC MO 15E 5745.0  -  5825.0 0.058  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application mVeqv+gOGfjRvYTNYZwRzQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

INGENICO
9 Avenue de la gare - Rovaltain TGV P.O. Box BP25156,
Valence Cedex 9, 26958
France
  Date of Grant: 08/24/2021

Application Dated: 08/20/2021
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-EXSBASEW
Name of Grantee:  INGENICO
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart POS Terminal BASE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.065  
CC MO ND 15E 5260.0  -  5320.0 0.062  
CC MO ND 15E 5500.0  -  5720.0 0.062  
CC MO 15E 5745.0  -  5825.0 0.058  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: