1. FCC ID
  2. XKB
  3. XKB-RX5CLWBT

FCC ID XKB-RX5CLWBT

Smart POS Terminal

by INGENICO

Grantee Code: XKB   Product Code: RX5CLWBT
Latest application date: 2023-09-29

FCC ID Device Details

FCC IDXKB-RX5CLWBT
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXKB
Product CodeRX5CLWBT
Applicant BusinessINGENICO 🇫🇷
Related Domains ingenico.com
Equipment ClassSmart POS Terminal
Test FirmCHINA CERTIFICATION ICT CO., LTD (DONGGUAN)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzOriginal Equipment2023-09-29
2412-2462 MHzOriginal Equipment2023-09-29
13.56 MHzOriginal Equipment2023-09-29
2402-2480 MHzOriginal Equipment2023-09-29

Exhibits

DocumentTypeAvailableFile
User Guide RX5000_20230922Users Manual2024-03-27PDF 959.4 KB
Internal PhotosInternal Photos2024-03-27PDF 3.3 MB
Internal photosInternal Photos2024-03-27PDF 3.3 MB
External PhotosExternal Photos2024-03-27PDF 2.7 MB
External photosExternal Photos2024-03-27PDF 2.7 MB
Label and Label LocationID Label/Location Info2023-09-29PDF 150.4 KB
RX5000_SCHSchematics2024-03-27PDF 796.9 KB
test Setup photos 15.225Test Setup Photos2024-03-27PDF 809 KB
test Setup photos 15CTest Setup Photos2024-03-27PDF 577.4 KB
test Setup photos 15ETest Setup Photos2024-03-27PDF 560.6 KB
CR230739799-00B 15Test Report2023-09-29PDF 624.6 KB
CR230739799-00C BLE ReportTest Report2023-09-29PDF 509.2 KB
CR230739799-00D BTTest Report2023-09-29PDF 525.3 KB
CR230739799-00E WIFI ReportTest Report2023-09-29PDF 523.2 KB
CR230739799-00F WIFI Report-Part15ETest Report2023-09-29PDF 647.1 KB
CR230739799-00H DFS ReportTest Report2023-09-29PDF 368.1 KB
RX5000 WIFI antenna specTest Report2023-09-29PDF 1.1 MB
RX5000-RF_ANTTest Report2023-09-29PDF 856 KB
CoveredEquipmentLetter-CombinedAttestation Statements2023-09-29PDF 88.7 KB
USA-LocalRepLetter Metadata onlyAttestation Statements2023-09-29PDF 114.4 KB
USA-LocalRepLetter_REVAttestation Statements2023-09-29PDF 126.2 KB
Authority to Act as AgentCover Letter(s)2023-09-29PDF 83.8 KB
ConfidentialityRequestLetterCover Letter(s)2023-09-29PDF 149.6 KB
NIIDeclarationLetterCover Letter(s)2023-09-29PDF 158.2 KB
ShortTermConfidentialityRequestLetterCover Letter(s)2023-09-29PDF 92.8 KB
CR230739799-00G MPERF Exposure Info2023-09-29PDF 215.9 KB
RF EXPOSURE EVALUATIONRF Exposure Info2023-09-29PDF 115.6 KB
RX5000 BLOCK Metadata onlyBlock DiagramPDF 74.3 KB
FCC U-NII Device Security Declaration Signed Metadata onlyOperational DescriptionPDF 202.8 KB
Operational Description Metadata onlyOperational DescriptionPDF 537 KB
Operational Description_rev Metadata onlyOperational DescriptionPDF 389.6 KB

Application Information

Application IDoNr84NQPDkyIHhiv28C6iA==
Final Action Date2023-09-29
Application PurposeOriginal Equipment
Applicant FRN0018912279
ModelRX5CLWBT
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionSmart POS Terminal
Responsible PartyNicolas Jacquemont, Certification Manager, nicolas.jacquemont@ingenico.com , +330475842123
Test FirmTanie Ou, CHINA CERTIFICATION ICT CO., LTD (DONGGUAN), qa@ccttt.com.cn , 0086 0769 86858888
TCB Emailo.kneip@kl-certification.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/27/2024
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz, 40MHz and 80MHz bandwidth mode for 5 GHz bands.

Applications

Application IDDatePurpose
oNr84NQPDkyIHhiv28C6iA==2023-09-29Original Equipment
f79oR1w32h8RAkRUf360qg==2023-09-29Original Equipment
dFBIZJPfYx6mByRk3VUBlg==2023-09-29Original Equipment
7eAhlwX1nDtcH2B079rqCA==2023-09-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
13.56 MHz15CCC
2402-2480 MHz0.013000015CCC
2402-2480 MHz0.00515CCC
2412-2462 MHz0.23615CCC
5180-5240 MHz0.04615ECC
5260-5320 MHz0.04915ECC, ND
5500-5720 MHz0.05315ECC, ND
5745-5825 MHz0.05315ECC

Grants

TCB Grant - Application oNr84NQPDkyIHhiv28C6iA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  KL-Certification GmbH
Heinrich-Hertz-Allee 7
St. Ingbert, 66386
Germany 		Date of Grant: 09/29/2023

Application Dated: 09/28/2023
INGENICO
9 Avenue de la gare - Rovaltain TGV
P.O. Box BP25156,
Valence Cedex 9, 26958
France
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-RX5CLWBT
Name of Grantee:  INGENICO
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart POS Terminal
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.046  
CC ND 15E 5260.0  -  5320.0 0.049  
CC ND 15E 5500.0  -  5720.0 0.053  
CC 15E 5745.0  -  5825.0 0.053  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20MHz, 40MHz and 80MHz bandwidth mode for 5 GHz bands.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application oNr84NQPDkyIHhiv28C6iA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

INGENICO
9 Avenue de la gare - Rovaltain TGV P.O. Box BP25156,
Valence Cedex 9, 26958
France 		  Date of Grant: 09/29/2023

Application Dated: 09/28/2023
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-RX5CLWBT
Name of Grantee:  INGENICO
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart POS Terminal
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.046  
CC ND 15E 5260.0  -  5320.0 0.049  
CC ND 15E 5500.0  -  5720.0 0.053  
CC 15E 5745.0  -  5825.0 0.053  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20MHz, 40MHz and 80MHz bandwidth mode for 5 GHz bands.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application f79oR1w32h8RAkRUf360qg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  KL-Certification GmbH
Heinrich-Hertz-Allee 7
St. Ingbert, 66386
Germany 		Date of Grant: 09/29/2023

Application Dated: 09/28/2023
INGENICO
9 Avenue de la gare - Rovaltain TGV
P.O. Box BP25156,
Valence Cedex 9, 26958
France
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-RX5CLWBT
Name of Grantee:  INGENICO
Equipment Class: Digital Transmission System
Notes: Smart POS Terminal
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  
CC 15C 2412.0  -  2462.0 0.236  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20MHz and 40MHz bandwidth mode for 2.4 GHz bands.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application f79oR1w32h8RAkRUf360qg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

INGENICO
9 Avenue de la gare - Rovaltain TGV P.O. Box BP25156,
Valence Cedex 9, 26958
France 		  Date of Grant: 09/29/2023

Application Dated: 09/28/2023
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-RX5CLWBT
Name of Grantee:  INGENICO
Equipment Class: Digital Transmission System
Notes: Smart POS Terminal
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.005  
CC 15C 2412.0  -  2462.0 0.236  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20MHz and 40MHz bandwidth mode for 2.4 GHz bands.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application dFBIZJPfYx6mByRk3VUBlg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  KL-Certification GmbH
Heinrich-Hertz-Allee 7
St. Ingbert, 66386
Germany 		Date of Grant: 09/29/2023

Application Dated: 09/28/2023
INGENICO
9 Avenue de la gare - Rovaltain TGV
P.O. Box BP25156,
Valence Cedex 9, 26958
France
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-RX5CLWBT
Name of Grantee:  INGENICO
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Smart POS Terminal
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application dFBIZJPfYx6mByRk3VUBlg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

INGENICO
9 Avenue de la gare - Rovaltain TGV P.O. Box BP25156,
Valence Cedex 9, 26958
France 		  Date of Grant: 09/29/2023

Application Dated: 09/28/2023
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-RX5CLWBT
Name of Grantee:  INGENICO
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Smart POS Terminal
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 7eAhlwX1nDtcH2B079rqCA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  KL-Certification GmbH
Heinrich-Hertz-Allee 7
St. Ingbert, 66386
Germany 		Date of Grant: 09/29/2023

Application Dated: 09/28/2023
INGENICO
9 Avenue de la gare - Rovaltain TGV
P.O. Box BP25156,
Valence Cedex 9, 26958
France
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-RX5CLWBT
Name of Grantee:  INGENICO
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart POS Terminal
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.013  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 7eAhlwX1nDtcH2B079rqCA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

INGENICO
9 Avenue de la gare - Rovaltain TGV P.O. Box BP25156,
Valence Cedex 9, 26958
France 		  Date of Grant: 09/29/2023

Application Dated: 09/28/2023
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-RX5CLWBT
Name of Grantee:  INGENICO
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart POS Terminal
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.013  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: