FCC ID XKB-XTRAWIBTC

Add-on RF module

by INGENICO

Grantee Code: XKB   Product Code: XTRAWIBTC
Latest application date: 2019-12-11

FCC ID Device Details

FCC IDXKB-XTRAWIBTC
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXKB
Product CodeXTRAWIBTC
Applicant BusinessINGENICO 🇫🇷
Related Domains ingenico.com
Equipment ClassAdd-on RF module
Test FirmCTC advanced GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2019-12-11
2402-2480 MHzOriginal Equipment2019-12-11
2412-2462 MHzOriginal Equipment2019-12-11

Exhibits

DocumentTypeAvailableFile
User manual Lane 7000 Part 1Users Manual2020-01-31PDF 5.6 MB
User manual Lane 7000 Part 2Users Manual2020-01-31PDF 1.4 MB
User manual Lane 8000 Part 1Users Manual2020-01-31PDF 5.9 MB
User manual Lane 8000 Part 2Users Manual2020-01-31PDF 509.8 KB
Internal photosInternal Photos2020-01-31PDF 1.4 MB
External photosExternal Photos2020-01-31PDF 513.6 KB
Label 7003ID Label/Location Info2019-12-11PDF 268.2 KB
Label 7005ID Label/Location Info2019-12-11PDF 200.9 KB
Label 8005ID Label/Location Info2019-12-11PDF 201.2 KB
Test setup photosTest Setup Photos2020-01-31PDF 772.8 KB
Test report DFSTest Report2019-12-11PDF 776.7 KB
Test report DSS Part 1Test Report2019-12-11PDF 2.2 MB
Test report DSS Part 2Test Report2019-12-11PDF 856.9 KB
Test report DSS conductedTest Report2019-12-11PDF 4.6 MB
Test report DTS Part 1Test Report2019-12-11PDF 2.9 MB
Test report DTS Part 2Test Report2019-12-11PDF 6 MB
Test report DTS Part 3Test Report2019-12-11PDF 2.6 MB
Test report UNII Part 1Test Report2019-12-11PDF 4 MB
Test report UNII Part 2Test Report2019-12-11PDF 5.9 MB
Test report UNII Part 3Test Report2019-12-11PDF 6 MB
Test report UNII Part 4Test Report2019-12-11PDF 5.1 MB
Test report UNII Part 5Test Report2019-12-11PDF 2.8 MB
Test report UNII Part 6Test Report2019-12-11PDF 5.9 MB
Test report UNII Part 7Test Report2019-12-11PDF 658 KB
Cover Letter - Declaration on re-use of Bluetooth conducted resultsCover Letter(s)2019-12-11PDF 110.6 KB
Cover Letter - Declaration on re-use of DFS test resultsCover Letter(s)2019-12-11PDF 110.9 KB
Cover Letter - Usage of the moduleCover Letter(s)2019-12-11PDF 137.9 KB
FCC Confidentiality request letter (short-term)Cover Letter(s)2019-12-11PDF 124.9 KB
FCC Confidentiality request letter(permanent)Cover Letter(s)2019-12-11PDF 137.6 KB
Modular Approval Request LetterCover Letter(s)2019-12-11PDF 1.8 MB
MPE CalculationRF Exposure Info2019-12-11PDF 259.2 KB
MPE calculationRF Exposure Info2019-12-11PDF 259.2 KB
Block diagram Metadata onlyBlock DiagramPDF 286.5 KB
Schematics Metadata onlySchematicsPDF 321.9 KB
Operational description Metadata onlyOperational DescriptionPDF 472.6 KB
UNII Declaration letter Metadata onlyOperational DescriptionPDF 103.8 KB
Software security information Metadata onlySDR Software/Security InfPDF 118.5 KB

Application Information

Application IDWoGQUK/FggRiPwVy9eMVEw==
Final Action Date2019-12-11
Application PurposeOriginal Equipment
Applicant FRN0018912279
ModelXTRAWIBTC
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionAdd-on RF module
Responsible PartyNicolas Jacquemont, Certification Manager, nicolas.jacquemont@ingenico.com , +330475842123
Test FirmGerald Schmidt, CTC advanced GmbH, mail@ctcadvanced.com , 49-681-598-0
TCB Emailtcb@ctcadvanced.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date01/31/2020
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is average conducted. This device supports a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. This modular transmitter is only approved for use by the grantee in its own products and must not be sold to third parties. The module has not been tested stand-alone and is limited to be used in host devices Lane/7000 and Lane/8000. Other configurations are not approved and require separate testing and certification. Approval is for operation as a client only device without radar detection or ad-hoc capability.

Applications

Application IDDatePurpose
WoGQUK/FggRiPwVy9eMVEw==2019-12-11Original Equipment
8JsKIEjTGa+69/gx5HplNQ==2019-12-11Original Equipment
2tGMzto0PUmqcuXamJjePA==2019-12-11Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002000015CCC
2412-2462 MHz0.091200015CCC
5180-5240 MHz0.009815ECC
5260-5320 MHz0.007215ECC
5500-5700 MHz0.01215ECC
5745-5825 MHz0.006615ECC

Grants

TCB Grant - Application WoGQUK/FggRiPwVy9eMVEw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CTC advanced GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 12/11/2019

Application Dated: 12/11/2019
INGENICO
9 Avenue de la gare - Rovaltain TGV
P.O. Box BP25156,
Valence Cedex 9, 26958
France
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-XTRAWIBTC
Name of Grantee:  INGENICO
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Add-on RF module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0098  
CC 15E 5260.0  -  5320.0 0.0072  
CC 15E 5500.0  -  5700.0 0.012  
CC 15E 5745.0  -  5825.0 0.0066  

Output power listed is average conducted.

This device supports a 20 MHz and 40 MHz bandwidth mode.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

This modular transmitter is only approved for use by the grantee in its own products and must not be sold to third parties.

The module has not been tested stand-alone and is limited to be used in host devices Lane/7000 and Lane/8000. Other configurations are not approved and require separate testing and certification.

Approval is for operation as a client only device without radar detection or ad-hoc capability.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application WoGQUK/FggRiPwVy9eMVEw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

INGENICO
9 Avenue de la gare - Rovaltain TGV P.O. Box BP25156,
Valence Cedex 9, 26958
France
  Date of Grant: 12/11/2019

Application Dated: 12/11/2019
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-XTRAWIBTC
Name of Grantee:  INGENICO
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Add-on RF module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0098  
CC 15E 5260.0  -  5320.0 0.0072  
CC 15E 5500.0  -  5700.0 0.012  
CC 15E 5745.0  -  5825.0 0.0066  

Output power listed is average conducted.

This device supports a 20 MHz and 40 MHz bandwidth mode.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

This modular transmitter is only approved for use by the grantee in its own products and must not be sold to third parties.

The module has not been tested stand-alone and is limited to be used in host devices Lane/7000 and Lane/8000. Other configurations are not approved and require separate testing and certification.

Approval is for operation as a client only device without radar detection or ad-hoc capability.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8JsKIEjTGa+69/gx5HplNQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CTC advanced GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 12/11/2019

Application Dated: 12/11/2019
INGENICO
9 Avenue de la gare - Rovaltain TGV
P.O. Box BP25156,
Valence Cedex 9, 26958
France
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-XTRAWIBTC
Name of Grantee:  INGENICO
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Add-on RF module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  

Output power listed is peak conducted.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

This modular transmitter is only approved for use by the grantee in its own products and must not be sold to third parties.

The module has not been tested stand-alone and is limited to be used in host devices Lane/7000 and Lane/8000. Other configurations are not approved and require separate testing and certification.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8JsKIEjTGa+69/gx5HplNQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

INGENICO
9 Avenue de la gare - Rovaltain TGV P.O. Box BP25156,
Valence Cedex 9, 26958
France
  Date of Grant: 12/11/2019

Application Dated: 12/11/2019
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-XTRAWIBTC
Name of Grantee:  INGENICO
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Add-on RF module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  

Output power listed is peak conducted.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

This modular transmitter is only approved for use by the grantee in its own products and must not be sold to third parties.

The module has not been tested stand-alone and is limited to be used in host devices Lane/7000 and Lane/8000. Other configurations are not approved and require separate testing and certification.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 2tGMzto0PUmqcuXamJjePA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CTC advanced GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 12/11/2019

Application Dated: 12/11/2019
INGENICO
9 Avenue de la gare - Rovaltain TGV
P.O. Box BP25156,
Valence Cedex 9, 26958
France
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-XTRAWIBTC
Name of Grantee:  INGENICO
Equipment Class: Digital Transmission System
Notes: Add-on RF module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0912  

Output power listed is peak conducted.

This device supports a 20 MHz and 40 MHz bandwidth mode.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

This modular transmitter is only approved for use by the grantee in its own products and must not be sold to third parties.

The module has not been tested stand-alone and is limited to be used in host devices Lane/7000 and Lane/8000. Other configurations are not approved and require separate testing and certification.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 2tGMzto0PUmqcuXamJjePA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

INGENICO
9 Avenue de la gare - Rovaltain TGV P.O. Box BP25156,
Valence Cedex 9, 26958
France
  Date of Grant: 12/11/2019

Application Dated: 12/11/2019
 
Attention: Nicolas Jacquemont , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKB-XTRAWIBTC
Name of Grantee:  INGENICO
Equipment Class: Digital Transmission System
Notes: Add-on RF module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0912  

Output power listed is peak conducted.

This device supports a 20 MHz and 40 MHz bandwidth mode.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

This modular transmitter is only approved for use by the grantee in its own products and must not be sold to third parties.

The module has not been tested stand-alone and is limited to be used in host devices Lane/7000 and Lane/8000. Other configurations are not approved and require separate testing and certification.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: