1. FCC ID
  2. XKB
  3. XKBIWP250

FCC ID XKBIWP250

POS terminal

by INGENICO

Grantee Code: XKB   Product Code: IWP250
Latest application date: 2009-09-07

FCC ID Device Details

FCC IDXKBIWP250
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXKB
Product CodeIWP250
Applicant BusinessINGENICO 🇫🇷
Related Domains ingenico.com sgs.com
Equipment ClassPOS terminal
Test FirmSGS TAIWAN LTD.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2009-09-07
824.6-846.8 MHzOriginal Equipment2009-09-07
13.56 MHzOriginal Equipment2009-09-07
2412-2462 MHzOriginal Equipment2009-09-07

Exhibits

DocumentTypeAvailableFile
manualUsers Manual2009-09-07PDF 852.6 KB
int photoInternal Photos2009-09-07PDF 328.4 KB
ext photoExternal Photos2009-09-07PDF 156.4 KB
label infoID Label/Location Info2009-09-07PDF 125.2 KB
tsup photoTest Setup Photos2009-09-07PDF 98.6 KB
testreport 15247Test Report2009-09-07PDF 1 MB
testreport 15247Test Report2009-09-07PDF 1 MB
testreport 15cTest Report2009-09-07PDF 506.6 KB
testreport 22 24Test Report2009-09-07PDF 1.7 MB
DoC proofCover Letter(s)2009-09-07PDF 18.2 KB
conf reqCover Letter(s)2009-09-07PDF 110.9 KB
conf reqCover Letter(s)2009-09-07PDF 121.6 KB
poaCover Letter(s)2009-09-07PDF 83.4 KB
RF exp calcRF Exposure Info2009-09-07PDF 494 KB
RF exp calcRF Exposure Info2009-09-07PDF 496.5 KB

Application Information

Application IDziFO/QnIqnsoGlyEi1lA+w==
Final Action Date2009-09-07
Application PurposeOriginal Equipment
Applicant FRN0018912279
ModelIWP250
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionPOS terminal
Responsible PartyMarc Delorme, Quality Manager, marc.delorme@ingenico.com , +33475842075
Technical ContactVincent Su, SGS Taiwan Ltd., Vincent.su@sgs.com , +886222993279
Non-Technical ContactVincent Su, SGS Taiwan Ltd., Vincent.su@sgs.com , +886222993279
Test FirmNELSON BAI, SGS TAIWAN LTD., nelson.bai@sgs.com , 886-2-22993279
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
ziFO/QnIqnsoGlyEi1lA+w==2009-09-07Original Equipment
nfmCx7JVPQ3zsUmUqKgxAQ==2009-09-07Original Equipment
eAfx5oYthHEJ561z274UPg==2009-09-07Original Equipment
TiDRl4o5LsXnw4qB0kmoPQ==2009-09-07Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
13.56 MHz15CCC
824.6-846.8 MHz1.352.5ppm243KGXW22H
824.6-846.8 MHz0.282.5ppm244KG7W22H
1850.2-1909.8 MHz0.492.5ppm246KGXW24EBC
1850.2-1909.8 MHz0.282.5ppm247KG7W24EBC
2402-2480 MHz0.001600015CCC
2412-2462 MHz0.046000015CCC

Grants

TCB Grant - Application ziFO/QnIqnsoGlyEi1lA+w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands 		Date of Grant: 09/07/2009

Application Dated: 09/04/2009
INGENICO
9 Avenue de la gare - Rolvatain TGV
P.O. Box BP25156,
Valence Cedex 9, 26958
France
 
Attention: Marc Delorme , Quality Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKBIWP250
Name of Grantee:  INGENICO
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: POS terminal
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0016  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ziFO/QnIqnsoGlyEi1lA+w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

INGENICO
9 Avenue de la gare - Rolvatain TGV P.O. Box BP25156,
Valence Cedex 9, 26958
France 		  Date of Grant: 09/07/2009

Application Dated: 09/04/2009
 
Attention: Marc Delorme , Quality Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKBIWP250
Name of Grantee:  INGENICO
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: POS terminal
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0016  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application TiDRl4o5LsXnw4qB0kmoPQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands 		Date of Grant: 09/07/2009

Application Dated: 09/04/2009
INGENICO
9 Avenue de la gare - Rolvatain TGV
P.O. Box BP25156,
Valence Cedex 9, 26958
France
 
Attention: Marc Delorme , Quality Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKBIWP250
Name of Grantee:  INGENICO
Equipment Class: Digital Transmission System
Notes: POS terminal
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.046  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application TiDRl4o5LsXnw4qB0kmoPQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

INGENICO
9 Avenue de la gare - Rolvatain TGV P.O. Box BP25156,
Valence Cedex 9, 26958
France 		  Date of Grant: 09/07/2009

Application Dated: 09/04/2009
 
Attention: Marc Delorme , Quality Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKBIWP250
Name of Grantee:  INGENICO
Equipment Class: Digital Transmission System
Notes: POS terminal
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.046  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application nfmCx7JVPQ3zsUmUqKgxAQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands 		Date of Grant: 09/07/2009

Application Dated: 09/04/2009
INGENICO
9 Avenue de la gare - Rolvatain TGV
P.O. Box BP25156,
Valence Cedex 9, 26958
France
 
Attention: Marc Delorme , Quality Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKBIWP250
Name of Grantee:  INGENICO
Equipment Class: PCS Licensed Transmitter
Notes: POS Terminal
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.6  -  846.8 1.35 2.5  PM 243KGXW
22H 824.6  -  846.8 0.28 2.5  PM 244KG7W
BC 24E 1850.2  -  1909.8 0.49 2.5  PM 246KGXW
BC 24E 1850.2  -  1909.8 0.28 2.5  PM 247KG7W

Output power is ERP for Part 22 and EIRP for Part 24. This device incorporates functions that are not operational in U.S. Territories. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application nfmCx7JVPQ3zsUmUqKgxAQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

INGENICO
9 Avenue de la gare - Rolvatain TGV P.O. Box BP25156,
Valence Cedex 9, 26958
France 		  Date of Grant: 09/07/2009

Application Dated: 09/04/2009
 
Attention: Marc Delorme , Quality Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKBIWP250
Name of Grantee:  INGENICO
Equipment Class: PCS Licensed Transmitter
Notes: POS Terminal
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.6  -  846.8 1.35 2.5  PM 243KGXW
22H 824.6  -  846.8 0.28 2.5  PM 244KG7W
BC 24E 1850.2  -  1909.8 0.49 2.5  PM 246KGXW
BC 24E 1850.2  -  1909.8 0.28 2.5  PM 247KG7W

Output power is ERP for Part 22 and EIRP for Part 24. This device incorporates functions that are not operational in U.S. Territories. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application eAfx5oYthHEJ561z274UPg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands 		Date of Grant: 09/07/2009

Application Dated: 09/04/2009
INGENICO
9 Avenue de la gare - Rolvatain TGV
P.O. Box BP25156,
Valence Cedex 9, 26958
France
 
Attention: Marc Delorme , Quality Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKBIWP250
Name of Grantee:  INGENICO
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: POS terminal
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application eAfx5oYthHEJ561z274UPg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

INGENICO
9 Avenue de la gare - Rolvatain TGV P.O. Box BP25156,
Valence Cedex 9, 26958
France 		  Date of Grant: 09/07/2009

Application Dated: 09/04/2009
 
Attention: Marc Delorme , Quality Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XKBIWP250
Name of Grantee:  INGENICO
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: POS terminal
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: